ARM: dts: rmobile: Synchronize DTs with Linux 6.1.7
Synchronize R-Car device trees with Linux 6.1.7,
commit 21e996306a6afaae88295858de0ffb8955173a15 .
The following script has been used for the synchronization:
$ for i in $(cd arch/arm/dts/ ; ls -1 r8a* | grep -v 'u-boot.dts' ; sed -n '/#include/ s@.*"\(.*\)"@\1@p' $(ls -1 r8a* | grep -v 'u-boot.dts')) ; do
if [ -e /linux-2.6/arch/arm64/boot/dts/renesas/$i ] ; then
cp /linux-2.6/arch/arm64/boot/dts/renesas/$i arch/arm/dts/ ;
elif [ -e /linux-2.6/arch/arm/boot/dts/$i ] ; then
cp /linux-2.6/arch/arm/boot/dts/$i arch/arm/dts/
else
echo "NOT FOUND: $i"
fi
done
$ git add $( ( cd arch/arm/dts/ ; ls -1 r8a* | grep -v 'u-boot.dts' ; sed -n '/#include/ s@.*"\(.*\)"@\1@p' $(ls -1 r8a* | grep -v 'u-boot.dts')) | tr " " "\n" | sed 's@^@arch/arm/dts/@g' )
Move the include/dt-bindings/{clk,clock}/versaclock.h header used by
the renesas boards to match Linux 6.1.y as well.
Keep arch/arm/dts/r8a774c0-u-boot.dtsi sdhi3 node as it is now used
by the arch/arm/dts/r8a774c0-cat874.dts board.
Pick s@spi-flash@flash@ change in arch/arm/dts/r8a779a0-falcon-u-boot.dts
from "ARM: dts: Synchronize R-Car V3U DTs with Linux 5.18.3" .
Adjust R8A77990 Ebisu CONFIG_SYS_MMC_ENV_DEV from 2 to 0 to reflect
the card enumeration in ebisu.dtsi /aliases DT node .
Adjust R8A7795 and R8A7796 ULCB CONFIG_SYS_MMC_ENV_DEV from 1 to 0 to
reflect the card enumeration in ulcb.dtsi /aliases DT node .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Tam Nguyen <tam.nguyen.xa@renesas.com> # r8a779a0-falcon-u-boot.dts
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> # r8a779a0-falcon-u-boot.dts
diff --git a/arch/arm/dts/r8a774a1.dtsi b/arch/arm/dts/r8a774a1.dtsi
index d64fb8b..7e64324 100644
--- a/arch/arm/dts/r8a774a1.dtsi
+++ b/arch/arm/dts/r8a774a1.dtsi
@@ -17,17 +17,6 @@
#address-cells = <2>;
#size-cells = <2>;
- aliases {
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
- i2c3 = &i2c3;
- i2c4 = &i2c4;
- i2c5 = &i2c5;
- i2c6 = &i2c6;
- i2c7 = &i2c_dvfs;
- };
-
/*
* The external audio clocks are configured as 0 Hz fixed frequency
* clocks by default.
@@ -58,7 +47,7 @@
clock-frequency = <0>;
};
- cluster0_opp: opp_table0 {
+ cluster0_opp: opp-table-0 {
compatible = "operating-points-v2";
opp-shared;
@@ -76,10 +65,11 @@
opp-hz = /bits/ 64 <1500000000>;
opp-microvolt = <820000>;
clock-latency-ns = <300000>;
+ opp-suspend;
};
};
- cluster1_opp: opp_table1 {
+ cluster1_opp: opp-table-1 {
compatible = "operating-points-v2";
opp-shared;
@@ -282,6 +272,7 @@
compatible = "renesas,r8a774a1-wdt",
"renesas,rcar-gen3-wdt";
reg = <0 0xe6020000 0 0x0c>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 402>;
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 402>;
@@ -714,7 +705,7 @@
status = "disabled";
};
- i2c_dvfs: i2c@e60b0000 {
+ iic_pmic: i2c@e60b0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,iic-r8a774a1",
@@ -1127,6 +1118,7 @@
"ch20", "ch21", "ch22", "ch23",
"ch24";
clocks = <&cpg CPG_MOD 812>;
+ clock-names = "fck";
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 812>;
phy-mode = "rgmii";
@@ -1176,6 +1168,7 @@
reg = <0 0xe66c0000 0 0x8000>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch_int", "g_int";
clocks = <&cpg CPG_MOD 914>,
<&cpg CPG_CORE R8A774A1_CLK_CANFD>,
<&can_clk>;
@@ -1696,12 +1689,12 @@
* clkout : #clock-cells = <0>; <&rcar_sound>;
* clkout0/1/2/3: #clock-cells = <1>; <&rcar_sound N>;
*/
- compatible = "renesas,rcar_sound-r8a774a1", "renesas,rcar_sound-gen3";
- reg = <0 0xec500000 0 0x1000>, /* SCU */
- <0 0xec5a0000 0 0x100>, /* ADG */
- <0 0xec540000 0 0x1000>, /* SSIU */
- <0 0xec541000 0 0x280>, /* SSI */
- <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/
+ compatible = "renesas,rcar_sound-r8a774a1", "renesas,rcar_sound-gen3";
+ reg = <0 0xec500000 0 0x1000>, /* SCU */
+ <0 0xec5a0000 0 0x100>, /* ADG */
+ <0 0xec540000 0 0x1000>, /* SSIU */
+ <0 0xec541000 0 0x280>, /* SSI */
+ <0 0xec760000 0 0x200>; /* Audio DMAC peri peri*/
reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
clocks = <&cpg CPG_MOD 1005>,
@@ -2008,7 +2001,7 @@
dma-names = "rx", "tx";
};
ssiu40: ssiu-32 {
- dmas = <&audma0 0x71>, <&audma1 0x72>;
+ dmas = <&audma0 0x71>, <&audma1 0x72>;
dma-names = "rx", "tx";
};
ssiu41: ssiu-33 {
@@ -2274,7 +2267,8 @@
"renesas,rcar-gen3-sdhi";
reg = <0 0xee100000 0 0x2000>;
interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 314>;
+ clocks = <&cpg CPG_MOD 314>, <&cpg CPG_CORE R8A774A1_CLK_SD0H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 314>;
@@ -2286,7 +2280,8 @@
"renesas,rcar-gen3-sdhi";
reg = <0 0xee120000 0 0x2000>;
interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 313>;
+ clocks = <&cpg CPG_MOD 313>, <&cpg CPG_CORE R8A774A1_CLK_SD1H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 313>;
@@ -2298,7 +2293,8 @@
"renesas,rcar-gen3-sdhi";
reg = <0 0xee140000 0 0x2000>;
interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 312>;
+ clocks = <&cpg CPG_MOD 312>, <&cpg CPG_CORE R8A774A1_CLK_SD2H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 312>;
@@ -2310,7 +2306,8 @@
"renesas,rcar-gen3-sdhi";
reg = <0 0xee160000 0 0x2000>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cpg CPG_MOD 311>;
+ clocks = <&cpg CPG_MOD 311>, <&cpg CPG_CORE R8A774A1_CLK_SD3H>;
+ clock-names = "core", "clkh";
max-frequency = <200000000>;
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 311>;
@@ -2326,7 +2323,6 @@
reg-names = "regs", "dirmap", "wbuf";
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 917>;
- clock-names = "rpc";
power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
resets = <&cpg 917>;
#address-cells = <1>;
@@ -2573,6 +2569,10 @@
#address-cells = <1>;
#size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ };
+
port@1 {
#address-cells = <1>;
#size-cells = <0>;
@@ -2628,6 +2628,10 @@
#address-cells = <1>;
#size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ };
+
port@1 {
#address-cells = <1>;
#size-cells = <0>;
@@ -2723,8 +2727,6 @@
port@0 {
reg = <0>;
- du_out_rgb: endpoint {
- };
};
port@1 {
reg = <1>;
@@ -2761,8 +2763,6 @@
};
port@1 {
reg = <1>;
- lvds0_out: endpoint {
- };
};
};
};
@@ -2774,7 +2774,7 @@
};
thermal-zones {
- sensor_thermal1: sensor-thermal1 {
+ sensor1_thermal: sensor1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 0>;
@@ -2789,7 +2789,7 @@
};
};
- sensor_thermal2: sensor-thermal2 {
+ sensor2_thermal: sensor2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 1>;
@@ -2804,7 +2804,7 @@
};
};
- sensor_thermal3: sensor-thermal3 {
+ sensor3_thermal: sensor3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsc 2>;