x86: Add congatec conga-QA3/E3845-4G (Bay Trail) support
This patch adds support for the congatec conga-QA3/E3845-4G eMMC8 SoM,
installed on the congatec Qseven 2.0 evaluation carrier board
(conga-QEVAL).
Its port is very similar to the MinnowboardMAX port and also uses
the Intel FSP as described in doc/README.x86.
Currently supported are the following interfaces / devices:
- UART (via Winbond legacy SuperIO chip on carrier board)
- Ethernet (PCIe Intel I210 / E1000)
- SPI including SPI NOR as boot-device
- USB 2.0
- SATA via U-Boot SCSI IF
- eMMC
- Video (HDMI output @ 800x600)
- PCIe
Not supported yet is:
- I2C
- USB 3.0
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 0b30883..4ef27dc 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -8,6 +8,9 @@
prompt "Mainboard vendor"
default VENDOR_EMULATION
+config VENDOR_CONGATEC
+ bool "congatec"
+
config VENDOR_COREBOOT
bool "coreboot"
@@ -26,6 +29,7 @@
endchoice
# board-specific options below
+source "board/congatec/Kconfig"
source "board/coreboot/Kconfig"
source "board/efi/Kconfig"
source "board/emulation/Kconfig"
diff --git a/arch/x86/dts/Makefile b/arch/x86/dts/Makefile
index fcfce95..23156bb 100644
--- a/arch/x86/dts/Makefile
+++ b/arch/x86/dts/Makefile
@@ -6,6 +6,7 @@
chromebook_link.dtb \
chromebox_panther.dtb \
chromebook_samus.dtb \
+ conga-qeval20-qa3-e3845.dtb \
cougarcanyon2.dtb \
crownbay.dtb \
efi.dtb \
diff --git a/arch/x86/dts/conga-qeval20-qa3-e3845.dts b/arch/x86/dts/conga-qeval20-qa3-e3845.dts
new file mode 100644
index 0000000..478dece
--- /dev/null
+++ b/arch/x86/dts/conga-qeval20-qa3-e3845.dts
@@ -0,0 +1,278 @@
+/*
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ * Copyright (C) 2016 Stefan Roese <sr@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/x86-gpio.h>
+#include <dt-bindings/interrupt-router/intel-irq.h>
+
+/include/ "skeleton.dtsi"
+/include/ "serial.dtsi"
+/include/ "rtc.dtsi"
+/include/ "tsc_timer.dtsi"
+
+/ {
+ model = "congatec-QEVAL20-QA3-E3845";
+ compatible = "congatec,qeval20-qa3-e3845", "intel,baytrail";
+
+ aliases {
+ serial0 = &serial;
+ spi0 = &spi;
+ };
+
+ config {
+ silent_console = <0>;
+ };
+
+ pch_pinctrl {
+ compatible = "intel,x86-pinctrl";
+ };
+
+ chosen {
+ stdout-path = "/serial";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "intel,baytrail-cpu";
+ reg = <0>;
+ intel,apic-id = <0>;
+ };
+
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "intel,baytrail-cpu";
+ reg = <1>;
+ intel,apic-id = <2>;
+ };
+
+ cpu@2 {
+ device_type = "cpu";
+ compatible = "intel,baytrail-cpu";
+ reg = <2>;
+ intel,apic-id = <4>;
+ };
+
+ cpu@3 {
+ device_type = "cpu";
+ compatible = "intel,baytrail-cpu";
+ reg = <3>;
+ intel,apic-id = <6>;
+ };
+ };
+
+ pci {
+ compatible = "intel,pci-baytrail", "pci-x86";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ u-boot,dm-pre-reloc;
+ ranges = <0x02000000 0x0 0x80000000 0x80000000 0 0x40000000
+ 0x42000000 0x0 0xc0000000 0xc0000000 0 0x20000000
+ 0x01000000 0x0 0x2000 0x2000 0 0xe000>;
+
+ pch@1f,0 {
+ reg = <0x0000f800 0 0 0 0>;
+ compatible = "pci8086,0f1c", "intel,pch9";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ irq-router {
+ compatible = "intel,irq-router";
+ intel,pirq-config = "ibase";
+ intel,ibase-offset = <0x50>;
+ intel,pirq-link = <8 8>;
+ intel,pirq-mask = <0xdee0>;
+ intel,pirq-routing = <
+ /* BayTrail PCI devices */
+ PCI_BDF(0, 2, 0) INTA PIRQA
+ PCI_BDF(0, 3, 0) INTA PIRQA
+ PCI_BDF(0, 16, 0) INTA PIRQA
+ PCI_BDF(0, 17, 0) INTA PIRQA
+ PCI_BDF(0, 18, 0) INTA PIRQA
+ PCI_BDF(0, 19, 0) INTA PIRQA
+ PCI_BDF(0, 20, 0) INTA PIRQA
+ PCI_BDF(0, 21, 0) INTA PIRQA
+ PCI_BDF(0, 22, 0) INTA PIRQA
+ PCI_BDF(0, 23, 0) INTA PIRQA
+ PCI_BDF(0, 24, 0) INTA PIRQA
+ PCI_BDF(0, 24, 1) INTC PIRQC
+ PCI_BDF(0, 24, 2) INTD PIRQD
+ PCI_BDF(0, 24, 3) INTB PIRQB
+ PCI_BDF(0, 24, 4) INTA PIRQA
+ PCI_BDF(0, 24, 5) INTC PIRQC
+ PCI_BDF(0, 24, 6) INTD PIRQD
+ PCI_BDF(0, 24, 7) INTB PIRQB
+ PCI_BDF(0, 26, 0) INTA PIRQA
+ PCI_BDF(0, 27, 0) INTA PIRQA
+ PCI_BDF(0, 28, 0) INTA PIRQA
+ PCI_BDF(0, 28, 1) INTB PIRQB
+ PCI_BDF(0, 28, 2) INTC PIRQC
+ PCI_BDF(0, 28, 3) INTD PIRQD
+ PCI_BDF(0, 29, 0) INTA PIRQA
+ PCI_BDF(0, 30, 0) INTA PIRQA
+ PCI_BDF(0, 30, 1) INTD PIRQD
+ PCI_BDF(0, 30, 2) INTB PIRQB
+ PCI_BDF(0, 30, 3) INTC PIRQC
+ PCI_BDF(0, 30, 4) INTD PIRQD
+ PCI_BDF(0, 30, 5) INTB PIRQB
+ PCI_BDF(0, 31, 3) INTB PIRQB
+
+ /*
+ * PCIe root ports downstream
+ * interrupts
+ */
+ PCI_BDF(1, 0, 0) INTA PIRQA
+ PCI_BDF(1, 0, 0) INTB PIRQB
+ PCI_BDF(1, 0, 0) INTC PIRQC
+ PCI_BDF(1, 0, 0) INTD PIRQD
+ PCI_BDF(2, 0, 0) INTA PIRQB
+ PCI_BDF(2, 0, 0) INTB PIRQC
+ PCI_BDF(2, 0, 0) INTC PIRQD
+ PCI_BDF(2, 0, 0) INTD PIRQA
+ PCI_BDF(3, 0, 0) INTA PIRQC
+ PCI_BDF(3, 0, 0) INTB PIRQD
+ PCI_BDF(3, 0, 0) INTC PIRQA
+ PCI_BDF(3, 0, 0) INTD PIRQB
+ PCI_BDF(4, 0, 0) INTA PIRQD
+ PCI_BDF(4, 0, 0) INTB PIRQA
+ PCI_BDF(4, 0, 0) INTC PIRQB
+ PCI_BDF(4, 0, 0) INTD PIRQC
+ >;
+ };
+
+ spi: spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "intel,ich9-spi";
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ compatible = "stmicro,n25q064a",
+ "spi-flash";
+ memory-map = <0xff800000 0x00800000>;
+ rw-mrc-cache {
+ label = "rw-mrc-cache";
+ reg = <0x006f0000 0x00010000>;
+ };
+ };
+ };
+
+ gpioa {
+ compatible = "intel,ich6-gpio";
+ u-boot,dm-pre-reloc;
+ reg = <0 0x20>;
+ bank-name = "A";
+ };
+
+ gpiob {
+ compatible = "intel,ich6-gpio";
+ u-boot,dm-pre-reloc;
+ reg = <0x20 0x20>;
+ bank-name = "B";
+ };
+
+ gpioc {
+ compatible = "intel,ich6-gpio";
+ u-boot,dm-pre-reloc;
+ reg = <0x40 0x20>;
+ bank-name = "C";
+ };
+
+ gpiod {
+ compatible = "intel,ich6-gpio";
+ u-boot,dm-pre-reloc;
+ reg = <0x60 0x20>;
+ bank-name = "D";
+ };
+
+ gpioe {
+ compatible = "intel,ich6-gpio";
+ u-boot,dm-pre-reloc;
+ reg = <0x80 0x20>;
+ bank-name = "E";
+ };
+
+ gpiof {
+ compatible = "intel,ich6-gpio";
+ u-boot,dm-pre-reloc;
+ reg = <0xA0 0x20>;
+ bank-name = "F";
+ };
+ };
+ };
+
+ fsp {
+ compatible = "intel,baytrail-fsp";
+ fsp,mrc-init-tseg-size = <0>;
+ fsp,mrc-init-mmio-size = <0x800>;
+ fsp,mrc-init-spd-addr1 = <0xa0>;
+ fsp,mrc-init-spd-addr2 = <0xa2>;
+ fsp,emmc-boot-mode = <2>;
+ fsp,enable-sdio;
+ fsp,enable-sdcard;
+ fsp,enable-hsuart1;
+ fsp,enable-spi;
+ fsp,enable-sata;
+ fsp,sata-mode = <1>;
+ fsp,enable-lpe;
+ fsp,lpss-sio-enable-pci-mode;
+ fsp,enable-dma0;
+ fsp,enable-dma1;
+ fsp,enable-i2c0;
+ fsp,enable-i2c1;
+ fsp,enable-i2c2;
+ fsp,enable-i2c3;
+ fsp,enable-i2c4;
+ fsp,enable-i2c5;
+ fsp,enable-i2c6;
+ fsp,enable-pwm0;
+ fsp,enable-pwm1;
+ fsp,igd-dvmt50-pre-alloc = <2>;
+ fsp,aperture-size = <2>;
+ fsp,gtt-size = <2>;
+ fsp,scc-enable-pci-mode;
+ fsp,os-selection = <4>;
+ fsp,emmc45-ddr50-enabled;
+ fsp,emmc45-retune-timer-value = <8>;
+ fsp,enable-igd;
+ fsp,enable-memory-down;
+ fsp,memory-down-params {
+ compatible = "intel,baytrail-fsp-mdp";
+ fsp,dram-speed = <2>; /* 2=1333MHz */
+ fsp,dram-type = <1>; /* 1=DDR3L */
+ fsp,dimm-0-enable;
+ fsp,dimm-1-enable;
+ fsp,dimm-width = <1>; /* 1=x16, 2=x32 */
+ fsp,dimm-density = <2>; /* 2=4Gbit */
+ fsp,dimm-bus-width = <3>; /* 3=64bits */
+ fsp,dimm-sides = <0>; /* 0=1 ranks -> 0x2b */
+
+ /* These following values might need a re-visit */
+ fsp,dimm-tcl = <8>;
+ fsp,dimm-trpt-rcd = <8>;
+ fsp,dimm-twr = <8>;
+ fsp,dimm-twtr = <4>;
+ fsp,dimm-trrd = <6>;
+ fsp,dimm-trtp = <4>;
+ fsp,dimm-tfaw = <22>;
+ };
+ };
+
+ microcode {
+ update@0 {
+#include "microcode/m0130673322.dtsi"
+ };
+ update@1 {
+#include "microcode/m0130679901.dtsi"
+ };
+ };
+};