diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 017dd26..bda6873 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -57,27 +57,27 @@
 	  Enable this to support the clocks
 
 config SPL_CLK_CCF
-	bool "SPL Common Clock Framework [CCF] support "
+	bool "SPL Common Clock Framework [CCF] support"
 	depends on SPL
 	help
 	  Enable this option if you want to (re-)use the Linux kernel's Common
 	  Clock Framework [CCF] code in U-Boot's SPL.
 
 config SPL_CLK_COMPOSITE_CCF
-	bool "SPL Common Clock Framework [CCF] composite clk support "
+	bool "SPL Common Clock Framework [CCF] composite clk support"
 	depends on SPL_CLK_CCF
 	help
 	  Enable this option if you want to (re-)use the Linux kernel's Common
 	  Clock Framework [CCF] composite code in U-Boot's SPL.
 
 config CLK_CCF
-	bool "Common Clock Framework [CCF] support "
+	bool "Common Clock Framework [CCF] support"
 	help
 	  Enable this option if you want to (re-)use the Linux kernel's Common
 	  Clock Framework [CCF] code in U-Boot's clock driver.
 
 config CLK_COMPOSITE_CCF
-	bool "Common Clock Framework [CCF] composite clk support "
+	bool "Common Clock Framework [CCF] composite clk support"
 	depends on CLK_CCF
 	help
 	  Enable this option if you want to (re-)use the Linux kernel's Common
@@ -164,7 +164,7 @@
 	  Enable this to support the clocks on Octeon MIPS platforms.
 
 config SANDBOX_CLK_CCF
-	bool "Sandbox Common Clock Framework [CCF] support "
+	bool "Sandbox Common Clock Framework [CCF] support"
 	depends on SANDBOX
 	select CLK_CCF
 	help
diff --git a/drivers/ddr/imx/imx8ulp/Kconfig b/drivers/ddr/imx/imx8ulp/Kconfig
index 5448c33..005f581 100644
--- a/drivers/ddr/imx/imx8ulp/Kconfig
+++ b/drivers/ddr/imx/imx8ulp/Kconfig
@@ -5,7 +5,7 @@
 	bool "imx8m dram"
 
 config IMX8ULP_DRAM_PHY_PLL_BYPASS
-	bool "Enable the DDR PHY PLL bypass mode, so PHY clock is from DDR_CLK "
+	bool "Enable the DDR PHY PLL bypass mode, so PHY clock is from DDR_CLK"
 	depends on IMX8ULP_DRAM
 
 config SAVED_DRAM_TIMING_BASE