mpc83xx: USB: Reorganized its support
The following patch reorganizes/reworks the USB support for mpc83xx
as under:-
* Moves the 83xx USB clock init from drivers/usb/host/ehci-fsl.c to
cpu/mpx83xx/cpu_init.c
* Board specific usb_phy_type is read from the environment
* Adds USB EHCI specific structure in include/usb/ehci-fsl.h
* Copyrights revamped in most of the following files
Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c
index d9b96b5..414565c 100644
--- a/cpu/mpc83xx/cpu_init.c
+++ b/cpu/mpc83xx/cpu_init.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2009 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -23,6 +23,10 @@
#include <common.h>
#include <mpc83xx.h>
#include <ioports.h>
+#ifdef CONFIG_USB_EHCI_FSL
+#include <asm/io.h>
+#include <usb/ehci-fsl.h>
+#endif
DECLARE_GLOBAL_DATA_PTR;
@@ -294,6 +298,19 @@
im->gpio[1].dat = CONFIG_SYS_GPIO2_DAT;
im->gpio[1].dir = CONFIG_SYS_GPIO2_DIR;
#endif
+#ifdef CONFIG_USB_EHCI_FSL
+ uint32_t temp;
+ struct usb_ehci *ehci = (struct usb_ehci *)CONFIG_SYS_MPC8xxx_USB_ADDR;
+
+ /* Configure interface. */
+ setbits_be32((void *)ehci->control, REFSEL_16MHZ | UTMI_PHY_EN);
+
+ /* Wait for clock to stabilize */
+ do {
+ temp = in_be32((void *)ehci->control);
+ udelay(1000);
+ } while (!(temp & PHY_CLK_VALID));
+#endif
}
int cpu_init_r (void)