armv8: layerscape: sata: refine port register configuration
Sata registers PP2C and PP3C are used to control the configuration
of the PHY control OOB timing for the COMINIT/COMWAKE parameters
respectively. Calculate those parameters from port clock frequency.
Overwrite those registers with calculated values to get better OOB
timing.
Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index ae57c0e..dc4a437 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -341,6 +341,8 @@
#ifdef CONFIG_SYS_SATA2
ccsr_ahci = (void *)CONFIG_SYS_SATA2;
out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
+ out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY2_CFG);
+ out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY3_CFG);
out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG);
#endif
@@ -348,6 +350,8 @@
#ifdef CONFIG_SYS_SATA1
ccsr_ahci = (void *)CONFIG_SYS_SATA1;
out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
+ out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY2_CFG);
+ out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY3_CFG);
out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG);
@@ -368,6 +372,8 @@
/* Disable SATA ECC */
out_le32((void *)CONFIG_SYS_DCSR_DCFG_ADDR + 0x520, 0x80000000);
out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
+ out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY2_CFG);
+ out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY3_CFG);
out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG);
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
index 09f64e7..1e65e4e 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
@@ -88,6 +88,8 @@
/* ahci port register default value */
#define AHCI_PORT_PHY_1_CFG 0xa003fffe
+#define AHCI_PORT_PHY2_CFG 0x28184d1f
+#define AHCI_PORT_PHY3_CFG 0x0e081509
#define AHCI_PORT_TRANS_CFG 0x08000029
#define AHCI_PORT_AXICC_CFG 0x3fffffff