da8xx/hawkboard: Add support for ohci host controller
Also enable the ohci port on hawkboard. These additions result in an
increased u-boot size -- adjust the same accordingly in the board's
config.
Move the usb header for da8xx platforms under arch-davinci.
Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
new file mode 100644
index 0000000..f0ccb83
--- /dev/null
+++ b/drivers/usb/host/ohci-da8xx.c
@@ -0,0 +1,48 @@
+/*
+ * Copyright (C) 2012 Sughosh Ganu <urwithsughosh@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+
+#include <asm/arch/da8xx-usb.h>
+
+int usb_cpu_init(void)
+{
+ /* enable psc for usb2.0 */
+ lpsc_on(DAVINCI_LPSC_USB20);
+
+ /* enable psc for usb1.0 */
+ lpsc_on(DAVINCI_LPSC_USB11);
+
+ /* start the on-chip usb phy and its pll */
+ if (usb_phy_on())
+ return 0;
+
+ return 1;
+}
+
+int usb_cpu_stop(void)
+{
+ usb_phy_off();
+
+ /* turn off the usb clock and assert the module reset */
+ lpsc_disable(DAVINCI_LPSC_USB11);
+ lpsc_disable(DAVINCI_LPSC_USB20);
+
+ return 0;
+}
+
+int usb_cpu_init_fail(void)
+{
+ return usb_cpu_stop();
+}