| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2014-2015 Freescale Semiconductor, Inc. |
| * Copyright 2020 NXP |
| */ |
| |
| #include <common.h> |
| #include <clock_legacy.h> |
| #include <efi_loader.h> |
| #include <linux/libfdt.h> |
| #include <fdt_support.h> |
| #include <phy.h> |
| #ifdef CONFIG_FSL_LSCH3 |
| #include <asm/arch/fdt.h> |
| #endif |
| #ifdef CONFIG_FSL_ESDHC |
| #include <fsl_esdhc.h> |
| #endif |
| #ifdef CONFIG_SYS_DPAA_FMAN |
| #include <fsl_fman.h> |
| #endif |
| #ifdef CONFIG_MP |
| #include <asm/arch/mp.h> |
| #endif |
| #include <fsl_sec.h> |
| #include <asm/arch-fsl-layerscape/soc.h> |
| #ifdef CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT |
| #include <asm/armv8/sec_firmware.h> |
| #endif |
| #include <asm/arch/speed.h> |
| #include <fsl_qbman.h> |
| |
| int fdt_fixup_phy_connection(void *blob, int offset, phy_interface_t phyc) |
| { |
| const char *conn; |
| |
| /* Do NOT apply fixup for backplane modes specified in DT */ |
| if (phyc == PHY_INTERFACE_MODE_XGMII) { |
| conn = fdt_getprop(blob, offset, "phy-connection-type", NULL); |
| if (is_backplane_mode(conn)) |
| return 0; |
| } |
| return fdt_setprop_string(blob, offset, "phy-connection-type", |
| phy_string_for_interface(phyc)); |
| } |
| |
| #ifdef CONFIG_MP |
| void ft_fixup_cpu(void *blob) |
| { |
| int off; |
| __maybe_unused u64 spin_tbl_addr = (u64)get_spin_tbl_addr(); |
| fdt32_t *reg; |
| int addr_cells; |
| u64 val, core_id; |
| size_t *boot_code_size = &(__secondary_boot_code_size); |
| u32 mask = cpu_pos_mask(); |
| int off_prev = -1; |
| |
| off = fdt_path_offset(blob, "/cpus"); |
| if (off < 0) { |
| puts("couldn't find /cpus node\n"); |
| return; |
| } |
| |
| fdt_support_default_count_cells(blob, off, &addr_cells, NULL); |
| |
| off = fdt_node_offset_by_prop_value(blob, off_prev, "device_type", |
| "cpu", 4); |
| while (off != -FDT_ERR_NOTFOUND) { |
| reg = (fdt32_t *)fdt_getprop(blob, off, "reg", 0); |
| if (reg) { |
| core_id = fdt_read_number(reg, addr_cells); |
| if (!test_bit(id_to_core(core_id), &mask)) { |
| fdt_del_node(blob, off); |
| off = off_prev; |
| } |
| } |
| off_prev = off; |
| off = fdt_node_offset_by_prop_value(blob, off_prev, |
| "device_type", "cpu", 4); |
| } |
| |
| #if defined(CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT) && \ |
| defined(CONFIG_SEC_FIRMWARE_ARMV8_PSCI) |
| int node; |
| u32 psci_ver; |
| |
| /* Check the psci version to determine if the psci is supported */ |
| psci_ver = sec_firmware_support_psci_version(); |
| if (psci_ver == 0xffffffff) { |
| /* remove psci DT node */ |
| node = fdt_path_offset(blob, "/psci"); |
| if (node >= 0) |
| goto remove_psci_node; |
| |
| node = fdt_node_offset_by_compatible(blob, -1, "arm,psci"); |
| if (node >= 0) |
| goto remove_psci_node; |
| |
| node = fdt_node_offset_by_compatible(blob, -1, "arm,psci-0.2"); |
| if (node >= 0) |
| goto remove_psci_node; |
| |
| node = fdt_node_offset_by_compatible(blob, -1, "arm,psci-1.0"); |
| if (node >= 0) |
| goto remove_psci_node; |
| |
| remove_psci_node: |
| if (node >= 0) |
| fdt_del_node(blob, node); |
| } else { |
| return; |
| } |
| #endif |
| off = fdt_path_offset(blob, "/cpus"); |
| if (off < 0) { |
| puts("couldn't find /cpus node\n"); |
| return; |
| } |
| fdt_support_default_count_cells(blob, off, &addr_cells, NULL); |
| |
| off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4); |
| while (off != -FDT_ERR_NOTFOUND) { |
| reg = (fdt32_t *)fdt_getprop(blob, off, "reg", 0); |
| if (reg) { |
| core_id = fdt_read_number(reg, addr_cells); |
| if (core_id == 0 || (is_core_online(core_id))) { |
| val = spin_tbl_addr; |
| val += id_to_core(core_id) * |
| SPIN_TABLE_ELEM_SIZE; |
| val = cpu_to_fdt64(val); |
| fdt_setprop_string(blob, off, "enable-method", |
| "spin-table"); |
| fdt_setprop(blob, off, "cpu-release-addr", |
| &val, sizeof(val)); |
| } else { |
| debug("skipping offline core\n"); |
| } |
| } else { |
| puts("Warning: found cpu node without reg property\n"); |
| } |
| off = fdt_node_offset_by_prop_value(blob, off, "device_type", |
| "cpu", 4); |
| } |
| |
| fdt_add_mem_rsv(blob, (uintptr_t)&secondary_boot_code, |
| *boot_code_size); |
| #if CONFIG_IS_ENABLED(EFI_LOADER) |
| efi_add_memory_map((uintptr_t)&secondary_boot_code, *boot_code_size, |
| EFI_RESERVED_MEMORY_TYPE); |
| #endif |
| } |
| #endif |
| |
| void fsl_fdt_disable_usb(void *blob) |
| { |
| int off; |
| /* |
| * SYSCLK is used as a reference clock for USB. When the USB |
| * controller is used, SYSCLK must meet the additional requirement |
| * of 100 MHz. |
| */ |
| if (CONFIG_SYS_CLK_FREQ != 100000000) { |
| off = fdt_node_offset_by_compatible(blob, -1, "snps,dwc3"); |
| while (off != -FDT_ERR_NOTFOUND) { |
| fdt_status_disabled(blob, off); |
| off = fdt_node_offset_by_compatible(blob, off, |
| "snps,dwc3"); |
| } |
| } |
| } |
| |
| #ifdef CONFIG_HAS_FEATURE_GIC64K_ALIGN |
| static void fdt_fixup_gic(void *blob) |
| { |
| int offset, err; |
| u64 reg[8]; |
| struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); |
| unsigned int val; |
| struct ccsr_scfg __iomem *scfg = (void *)CONFIG_SYS_FSL_SCFG_ADDR; |
| int align_64k = 0; |
| |
| val = gur_in32(&gur->svr); |
| |
| if (!IS_SVR_DEV(val, SVR_DEV(SVR_LS1043A))) { |
| align_64k = 1; |
| } else if (SVR_REV(val) != REV1_0) { |
| val = scfg_in32(&scfg->gic_align) & (0x01 << GIC_ADDR_BIT); |
| if (!val) |
| align_64k = 1; |
| } |
| |
| offset = fdt_subnode_offset(blob, 0, "interrupt-controller@1400000"); |
| if (offset < 0) { |
| printf("WARNING: fdt_subnode_offset can't find node %s: %s\n", |
| "interrupt-controller@1400000", fdt_strerror(offset)); |
| return; |
| } |
| |
| /* Fixup gic node align with 64K */ |
| if (align_64k) { |
| reg[0] = cpu_to_fdt64(GICD_BASE_64K); |
| reg[1] = cpu_to_fdt64(GICD_SIZE_64K); |
| reg[2] = cpu_to_fdt64(GICC_BASE_64K); |
| reg[3] = cpu_to_fdt64(GICC_SIZE_64K); |
| reg[4] = cpu_to_fdt64(GICH_BASE_64K); |
| reg[5] = cpu_to_fdt64(GICH_SIZE_64K); |
| reg[6] = cpu_to_fdt64(GICV_BASE_64K); |
| reg[7] = cpu_to_fdt64(GICV_SIZE_64K); |
| } else { |
| /* Fixup gic node align with default */ |
| reg[0] = cpu_to_fdt64(GICD_BASE); |
| reg[1] = cpu_to_fdt64(GICD_SIZE); |
| reg[2] = cpu_to_fdt64(GICC_BASE); |
| reg[3] = cpu_to_fdt64(GICC_SIZE); |
| reg[4] = cpu_to_fdt64(GICH_BASE); |
| reg[5] = cpu_to_fdt64(GICH_SIZE); |
| reg[6] = cpu_to_fdt64(GICV_BASE); |
| reg[7] = cpu_to_fdt64(GICV_SIZE); |
| } |
| |
| err = fdt_setprop(blob, offset, "reg", reg, sizeof(reg)); |
| if (err < 0) { |
| printf("WARNING: fdt_setprop can't set %s from node %s: %s\n", |
| "reg", "interrupt-controller@1400000", |
| fdt_strerror(err)); |
| return; |
| } |
| |
| return; |
| } |
| #endif |
| |
| #ifdef CONFIG_HAS_FEATURE_ENHANCED_MSI |
| static int _fdt_fixup_msi_node(void *blob, const char *name, |
| int irq_0, int irq_1, int rev) |
| { |
| int err, offset, len; |
| u32 tmp[4][3]; |
| void *p; |
| |
| offset = fdt_path_offset(blob, name); |
| if (offset < 0) { |
| printf("WARNING: fdt_path_offset can't find path %s: %s\n", |
| name, fdt_strerror(offset)); |
| return 0; |
| } |
| |
| /*fixup the property of interrupts*/ |
| |
| tmp[0][0] = cpu_to_fdt32(0x0); |
| tmp[0][1] = cpu_to_fdt32(irq_0); |
| tmp[0][2] = cpu_to_fdt32(0x4); |
| |
| if (rev > REV1_0) { |
| tmp[1][0] = cpu_to_fdt32(0x0); |
| tmp[1][1] = cpu_to_fdt32(irq_1); |
| tmp[1][2] = cpu_to_fdt32(0x4); |
| tmp[2][0] = cpu_to_fdt32(0x0); |
| tmp[2][1] = cpu_to_fdt32(irq_1 + 1); |
| tmp[2][2] = cpu_to_fdt32(0x4); |
| tmp[3][0] = cpu_to_fdt32(0x0); |
| tmp[3][1] = cpu_to_fdt32(irq_1 + 2); |
| tmp[3][2] = cpu_to_fdt32(0x4); |
| len = sizeof(tmp); |
| } else { |
| len = sizeof(tmp[0]); |
| } |
| |
| err = fdt_setprop(blob, offset, "interrupts", tmp, len); |
| if (err < 0) { |
| printf("WARNING: fdt_setprop can't set %s from node %s: %s\n", |
| "interrupts", name, fdt_strerror(err)); |
| return 0; |
| } |
| |
| /*fixup the property of reg*/ |
| p = (char *)fdt_getprop(blob, offset, "reg", &len); |
| if (!p) { |
| printf("WARNING: fdt_getprop can't get %s from node %s\n", |
| "reg", name); |
| return 0; |
| } |
| |
| memcpy((char *)tmp, p, len); |
| |
| if (rev > REV1_0) |
| *((u32 *)tmp + 3) = cpu_to_fdt32(0x1000); |
| else |
| *((u32 *)tmp + 3) = cpu_to_fdt32(0x8); |
| |
| err = fdt_setprop(blob, offset, "reg", tmp, len); |
| if (err < 0) { |
| printf("WARNING: fdt_setprop can't set %s from node %s: %s\n", |
| "reg", name, fdt_strerror(err)); |
| return 0; |
| } |
| |
| /*fixup the property of compatible*/ |
| if (rev > REV1_0) |
| err = fdt_setprop_string(blob, offset, "compatible", |
| "fsl,ls1043a-v1.1-msi"); |
| else |
| err = fdt_setprop_string(blob, offset, "compatible", |
| "fsl,ls1043a-msi"); |
| if (err < 0) { |
| printf("WARNING: fdt_setprop can't set %s from node %s: %s\n", |
| "compatible", name, fdt_strerror(err)); |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| static int _fdt_fixup_pci_msi(void *blob, const char *name, int rev) |
| { |
| int offset, len, err; |
| void *p; |
| int val; |
| u32 tmp[4][8]; |
| |
| offset = fdt_path_offset(blob, name); |
| if (offset < 0) { |
| printf("WARNING: fdt_path_offset can't find path %s: %s\n", |
| name, fdt_strerror(offset)); |
| return 0; |
| } |
| |
| p = (char *)fdt_getprop(blob, offset, "interrupt-map", &len); |
| if (!p || len != sizeof(tmp)) { |
| printf("WARNING: fdt_getprop can't get %s from node %s\n", |
| "interrupt-map", name); |
| return 0; |
| } |
| |
| memcpy((char *)tmp, p, len); |
| |
| val = fdt32_to_cpu(tmp[0][6]); |
| if (rev == REV1_0) { |
| tmp[1][6] = cpu_to_fdt32(val + 1); |
| tmp[2][6] = cpu_to_fdt32(val + 2); |
| tmp[3][6] = cpu_to_fdt32(val + 3); |
| } else { |
| tmp[1][6] = cpu_to_fdt32(val); |
| tmp[2][6] = cpu_to_fdt32(val); |
| tmp[3][6] = cpu_to_fdt32(val); |
| } |
| |
| err = fdt_setprop(blob, offset, "interrupt-map", tmp, sizeof(tmp)); |
| if (err < 0) { |
| printf("WARNING: fdt_setprop can't set %s from node %s: %s.\n", |
| "interrupt-map", name, fdt_strerror(err)); |
| return 0; |
| } |
| return 1; |
| } |
| |
| /* Fixup msi node for ls1043a rev1.1*/ |
| |
| static void fdt_fixup_msi(void *blob) |
| { |
| struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); |
| unsigned int rev; |
| |
| rev = gur_in32(&gur->svr); |
| |
| if (!IS_SVR_DEV(rev, SVR_DEV(SVR_LS1043A))) |
| return; |
| |
| rev = SVR_REV(rev); |
| |
| _fdt_fixup_msi_node(blob, "/soc/msi-controller1@1571000", |
| 116, 111, rev); |
| _fdt_fixup_msi_node(blob, "/soc/msi-controller2@1572000", |
| 126, 121, rev); |
| _fdt_fixup_msi_node(blob, "/soc/msi-controller3@1573000", |
| 160, 155, rev); |
| |
| _fdt_fixup_pci_msi(blob, "/soc/pcie@3400000", rev); |
| _fdt_fixup_pci_msi(blob, "/soc/pcie@3500000", rev); |
| _fdt_fixup_pci_msi(blob, "/soc/pcie@3600000", rev); |
| } |
| #endif |
| |
| #ifdef CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT |
| /* Remove JR node used by SEC firmware */ |
| void fdt_fixup_remove_jr(void *blob) |
| { |
| int jr_node, addr_cells, len; |
| int crypto_node = fdt_path_offset(blob, "crypto"); |
| u64 jr_offset, used_jr; |
| fdt32_t *reg; |
| |
| used_jr = sec_firmware_used_jobring_offset(); |
| fdt_support_default_count_cells(blob, crypto_node, &addr_cells, NULL); |
| |
| jr_node = fdt_node_offset_by_compatible(blob, crypto_node, |
| "fsl,sec-v4.0-job-ring"); |
| |
| while (jr_node != -FDT_ERR_NOTFOUND) { |
| reg = (fdt32_t *)fdt_getprop(blob, jr_node, "reg", &len); |
| jr_offset = fdt_read_number(reg, addr_cells); |
| if (jr_offset == used_jr) { |
| fdt_del_node(blob, jr_node); |
| break; |
| } |
| jr_node = fdt_node_offset_by_compatible(blob, jr_node, |
| "fsl,sec-v4.0-job-ring"); |
| } |
| } |
| #endif |
| |
| #ifdef CONFIG_ARCH_LS1028A |
| static void fdt_disable_multimedia(void *blob, unsigned int svr) |
| { |
| int off; |
| |
| if (IS_MULTIMEDIA_EN(svr)) |
| return; |
| |
| /* Disable eDP/LCD node */ |
| off = fdt_node_offset_by_compatible(blob, -1, "arm,mali-dp500"); |
| if (off != -FDT_ERR_NOTFOUND) |
| fdt_status_disabled(blob, off); |
| |
| /* Disable GPU node */ |
| off = fdt_node_offset_by_compatible(blob, -1, "fsl,ls1028a-gpu"); |
| if (off != -FDT_ERR_NOTFOUND) |
| fdt_status_disabled(blob, off); |
| } |
| #endif |
| |
| #ifdef CONFIG_PCIE_ECAM_GENERIC |
| __weak void fdt_fixup_ecam(void *blob) |
| { |
| } |
| #endif |
| |
| void ft_cpu_setup(void *blob, bd_t *bd) |
| { |
| struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); |
| unsigned int svr = gur_in32(&gur->svr); |
| |
| /* delete crypto node if not on an E-processor */ |
| if (!IS_E_PROCESSOR(svr)) |
| fdt_fixup_crypto_node(blob, 0); |
| #if CONFIG_SYS_FSL_SEC_COMPAT >= 4 |
| else { |
| ccsr_sec_t __iomem *sec; |
| |
| #ifdef CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT |
| fdt_fixup_remove_jr(blob); |
| fdt_fixup_kaslr(blob); |
| #endif |
| |
| sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR; |
| fdt_fixup_crypto_node(blob, sec_in32(&sec->secvid_ms)); |
| } |
| #endif |
| |
| #ifdef CONFIG_MP |
| ft_fixup_cpu(blob); |
| #endif |
| |
| #ifdef CONFIG_SYS_NS16550 |
| do_fixup_by_compat_u32(blob, "fsl,ns16550", |
| "clock-frequency", CONFIG_SYS_NS16550_CLK, 1); |
| #endif |
| |
| do_fixup_by_path_u32(blob, "/sysclk", "clock-frequency", |
| CONFIG_SYS_CLK_FREQ, 1); |
| |
| #ifdef CONFIG_GIC_V3_ITS |
| ls_gic_rd_tables_init(blob); |
| #endif |
| |
| #if defined(CONFIG_PCIE_LAYERSCAPE) || defined(CONFIG_PCIE_LAYERSCAPE_GEN4) |
| ft_pci_setup(blob, bd); |
| #endif |
| |
| #ifdef CONFIG_FSL_ESDHC |
| fdt_fixup_esdhc(blob, bd); |
| #endif |
| |
| #ifdef CONFIG_SYS_DPAA_QBMAN |
| fdt_fixup_bportals(blob); |
| fdt_fixup_qportals(blob); |
| do_fixup_by_compat_u32(blob, "fsl,qman", |
| "clock-frequency", get_qman_freq(), 1); |
| #endif |
| |
| #ifdef CONFIG_SYS_DPAA_FMAN |
| fdt_fixup_fman_firmware(blob); |
| #endif |
| #ifndef CONFIG_ARCH_LS1012A |
| fsl_fdt_disable_usb(blob); |
| #endif |
| #ifdef CONFIG_HAS_FEATURE_GIC64K_ALIGN |
| fdt_fixup_gic(blob); |
| #endif |
| #ifdef CONFIG_HAS_FEATURE_ENHANCED_MSI |
| fdt_fixup_msi(blob); |
| #endif |
| #ifdef CONFIG_ARCH_LS1028A |
| fdt_disable_multimedia(blob, svr); |
| #endif |
| #ifdef CONFIG_PCIE_ECAM_GENERIC |
| fdt_fixup_ecam(blob); |
| #endif |
| } |