OMAP3: Add common power code, README, and BeagleBoard
Add BeagleBoard support, common power code and README.
Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
diff --git a/board/omap3/common/Makefile b/board/omap3/common/Makefile
new file mode 100644
index 0000000..28fbf54
--- /dev/null
+++ b/board/omap3/common/Makefile
@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)board/$(VENDOR)/common)
+endif
+
+LIB = $(obj)lib$(VENDOR).a
+
+COBJS-$(CONFIG_OMAP3_BEAGLE) += power.o
+
+COBJS := $(COBJS-y)
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+all: $(LIB)
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/omap3/common/power.c b/board/omap3/common/power.c
new file mode 100644
index 0000000..4908e5b
--- /dev/null
+++ b/board/omap3/common/power.c
@@ -0,0 +1,74 @@
+/*
+ * (C) Copyright 2004-2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ * Sunil Kumar <sunilsaini05@gmail.com>
+ * Shashi Ranjan <shashiranjanmca05@gmail.com>
+ *
+ * Derived from Beagle Board and 3430 SDP code by
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Syed Mohammed Khasim <khasim@ti.com>
+ *
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/arch/sys_proto.h>
+#include <i2c.h>
+
+/******************************************************************************
+ * Routine: power_init_r
+ * Description: Configure power supply
+ *****************************************************************************/
+void power_init_r(void)
+{
+ unsigned char byte;
+
+#ifdef CONFIG_DRIVER_OMAP34XX_I2C
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#endif
+
+ /*
+ * Configure OMAP3 supply voltages in power management
+ * companion chip.
+ */
+
+ /* set VAUX3 to 2.8V */
+ byte = DEV_GRP_P1;
+ i2c_write(PWRMGT_ADDR_ID4, VAUX3_DEV_GRP, 1, &byte, 1);
+ byte = VAUX3_VSEL_28;
+ i2c_write(PWRMGT_ADDR_ID4, VAUX3_DEDICATED, 1, &byte, 1);
+
+ /* set VPLL2 to 1.8V */
+ byte = DEV_GRP_ALL;
+ i2c_write(PWRMGT_ADDR_ID4, VPLL2_DEV_GRP, 1, &byte, 1);
+ byte = VPLL2_VSEL_18;
+ i2c_write(PWRMGT_ADDR_ID4, VPLL2_DEDICATED, 1, &byte, 1);
+
+ /* set VDAC to 1.8V */
+ byte = DEV_GRP_P1;
+ i2c_write(PWRMGT_ADDR_ID4, VDAC_DEV_GRP, 1, &byte, 1);
+ byte = VDAC_VSEL_18;
+ i2c_write(PWRMGT_ADDR_ID4, VDAC_DEDICATED, 1, &byte, 1);
+
+ /* enable LED */
+ byte = LEDBPWM | LEDAPWM | LEDBON | LEDAON;
+ i2c_write(PWRMGT_ADDR_ID3, LEDEN, 1, &byte, 1);
+}