clk: scmi: check the clock state/parent/rate control permissions
Clock driver based on SCMI clock management protocol in Linux checks
clock state, parent and rate control permissions. To be consistent with
the kernel driver, add this check here. CLOCK_GET_PERMISSIONS is from
ARM System Control and Management Interface Platform Design Document 3.2.
When using common clock framework (CCF), use the clock signal ID to get
the clock registered by clk_register() in scmi_clk_probe(), and then
obatin the struct clk_scmi variable with container_of().
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
diff --git a/drivers/clk/clk_scmi.c b/drivers/clk/clk_scmi.c
index af5e867..af69850 100644
--- a/drivers/clk/clk_scmi.c
+++ b/drivers/clk/clk_scmi.c
@@ -13,6 +13,54 @@
#include <asm/types.h>
#include <linux/clk-provider.h>
+struct clk_scmi {
+ struct clk clk;
+ u32 ctrl_flags;
+};
+
+struct scmi_clock_priv {
+ u32 version;
+};
+
+static int scmi_clk_get_permissions(struct udevice *dev, int clkid, u32 *perm)
+{
+ struct scmi_clock_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ struct scmi_clk_get_permissions_in in = {
+ .clock_id = clkid,
+ };
+ struct scmi_clk_get_permissions_out out;
+ struct scmi_msg msg = {
+ .protocol_id = SCMI_PROTOCOL_ID_CLOCK,
+ .message_id = SCMI_CLOCK_GET_PERMISSIONS,
+ .in_msg = (u8 *)&in,
+ .in_msg_sz = sizeof(in),
+ .out_msg = (u8 *)&out,
+ .out_msg_sz = sizeof(out),
+ };
+
+ if (priv->version < CLOCK_PROTOCOL_VERSION_3_0) {
+ log_debug("%s: SCMI clock management protocol version is less than 3.0.\n", __func__);
+ return -EINVAL;
+ }
+
+ ret = devm_scmi_process_msg(dev, &msg);
+ if (ret) {
+ log_debug("%s: get SCMI clock management protocol permissions failed\n", __func__);
+ return ret;
+ }
+
+ ret = scmi_to_linux_errno(out.status);
+ if (ret < 0) {
+ log_debug("%s: the status code of getting permissions: %d\n", __func__, ret);
+ return ret;
+ }
+
+ *perm = out.permissions;
+ return 0;
+}
+
static int scmi_clk_get_num_clock(struct udevice *dev, size_t *num_clocks)
{
struct scmi_clk_protocol_attr_out out;
@@ -33,7 +81,8 @@
return 0;
}
-static int scmi_clk_get_attibute(struct udevice *dev, int clkid, char **name)
+static int scmi_clk_get_attibute(struct udevice *dev, int clkid, char **name,
+ u32 *attr)
{
struct scmi_clk_attribute_in in = {
.clock_id = clkid,
@@ -54,6 +103,7 @@
return ret;
*name = strdup(out.clock_name);
+ *attr = out.attributes;
return 0;
}
@@ -79,12 +129,48 @@
static int scmi_clk_enable(struct clk *clk)
{
- return scmi_clk_gate(clk, 1);
+ struct clk_scmi *clkscmi;
+ struct clk *c;
+ int ret;
+
+ if (!CONFIG_IS_ENABLED(CLK_CCF))
+ return scmi_clk_gate(clk, 1);
+
+ ret = clk_get_by_id(clk->id, &c);
+ if (ret)
+ return ret;
+
+ clkscmi = container_of(c, struct clk_scmi, clk);
+
+ if (clkscmi->ctrl_flags & SUPPORT_CLK_STAT_CONTROL)
+ return scmi_clk_gate(clk, 1);
+
+ /* Following Linux drivers/clk/clk-scmi.c, directly return 0 if agent has no permission. */
+ log_debug("%s: SCMI CLOCK: the clock cannot be enabled by the agent.\n", __func__);
+ return 0;
}
static int scmi_clk_disable(struct clk *clk)
{
- return scmi_clk_gate(clk, 0);
+ struct clk_scmi *clkscmi;
+ struct clk *c;
+ int ret;
+
+ if (!CONFIG_IS_ENABLED(CLK_CCF))
+ return scmi_clk_gate(clk, 0);
+
+ ret = clk_get_by_id(clk->id, &c);
+ if (ret)
+ return ret;
+
+ clkscmi = container_of(c, struct clk_scmi, clk);
+
+ if (clkscmi->ctrl_flags & SUPPORT_CLK_STAT_CONTROL)
+ return scmi_clk_gate(clk, 0);
+
+ /* Following Linux drivers/clk/clk-scmi.c, directly return 0 if agent has no permission. */
+ log_debug("%s: SCMI CLOCK: the clock cannot be disabled by the agent.\n", __func__);
+ return 0;
}
static ulong scmi_clk_get_rate(struct clk *clk)
@@ -109,7 +195,7 @@
return (ulong)(((u64)out.rate_msb << 32) | out.rate_lsb);
}
-static ulong scmi_clk_set_rate(struct clk *clk, ulong rate)
+static ulong __scmi_clk_set_rate(struct clk *clk, ulong rate)
{
struct scmi_clk_rate_set_in in = {
.clock_id = clk->id,
@@ -134,9 +220,33 @@
return scmi_clk_get_rate(clk);
}
+static ulong scmi_clk_set_rate(struct clk *clk, ulong rate)
+{
+ struct clk_scmi *clkscmi;
+ struct clk *c;
+ int ret;
+
+ if (!CONFIG_IS_ENABLED(CLK_CCF))
+ return __scmi_clk_set_rate(clk, rate);
+
+ ret = clk_get_by_id(clk->id, &c);
+ if (ret)
+ return ret;
+
+ clkscmi = container_of(c, struct clk_scmi, clk);
+
+ if (clkscmi->ctrl_flags & SUPPORT_CLK_RATE_CONTROL)
+ return __scmi_clk_set_rate(clk, rate);
+
+ /* Following Linux drivers/clk/clk-scmi.c, directly return 0 if agent has no permission. */
+ log_debug("%s: SCMI CLOCK: the clock rate cannot be changed by the agent.\n", __func__);
+ return 0;
+}
+
static int scmi_clk_probe(struct udevice *dev)
{
- struct clk *clk;
+ struct clk_scmi *clk_scmi;
+ struct scmi_clock_priv *priv = dev_get_priv(dev);
size_t num_clocks, i;
int ret;
@@ -155,31 +265,51 @@
if (ret)
return ret;
+ ret = scmi_generic_protocol_version(dev, SCMI_PROTOCOL_ID_CLOCK, &priv->version);
+ if (ret) {
+ log_debug("%s: get SCMI clock management protocol version failed\n", __func__);
+ return ret;
+ }
+
for (i = 0; i < num_clocks; i++) {
char *clock_name;
+ u32 attributes;
- if (!scmi_clk_get_attibute(dev, i, &clock_name)) {
- clk = kzalloc(sizeof(*clk), GFP_KERNEL);
- if (!clk || !clock_name)
+ if (!scmi_clk_get_attibute(dev, i, &clock_name, &attributes)) {
+ clk_scmi = kzalloc(sizeof(*clk_scmi), GFP_KERNEL);
+ if (!clk_scmi || !clock_name)
ret = -ENOMEM;
else
- ret = clk_register(clk, dev->driver->name,
+ ret = clk_register(&clk_scmi->clk, dev->driver->name,
clock_name, dev->name);
if (ret) {
- free(clk);
+ free(clk_scmi);
free(clock_name);
return ret;
}
- clk_dm(i, clk);
+ clk_dm(i, &clk_scmi->clk);
+
+ if (CLK_HAS_RESTRICTIONS(attributes)) {
+ u32 perm;
+
+ ret = scmi_clk_get_permissions(dev, i, &perm);
+ if (ret < 0)
+ clk_scmi->ctrl_flags = 0;
+ else
+ clk_scmi->ctrl_flags = perm;
+ } else {
+ clk_scmi->ctrl_flags = SUPPORT_CLK_STAT_CONTROL | SUPPORT_CLK_PARENT_CONTROL |
+ SUPPORT_CLK_RATE_CONTROL;
+ }
}
}
return 0;
}
-static int scmi_clk_set_parent(struct clk *clk, struct clk *parent)
+static int __scmi_clk_set_parent(struct clk *clk, struct clk *parent)
{
struct scmi_clk_parent_set_in in = {
.clock_id = clk->id,
@@ -198,6 +328,29 @@
return scmi_to_linux_errno(out.status);
}
+static int scmi_clk_set_parent(struct clk *clk, struct clk *parent)
+{
+ struct clk_scmi *clkscmi;
+ struct clk *c;
+ int ret;
+
+ if (!CONFIG_IS_ENABLED(CLK_CCF))
+ return -ENOTSUPP;
+
+ ret = clk_get_by_id(clk->id, &c);
+ if (ret)
+ return ret;
+
+ clkscmi = container_of(c, struct clk_scmi, clk);
+
+ if (clkscmi->ctrl_flags & SUPPORT_CLK_PARENT_CONTROL)
+ return __scmi_clk_set_parent(clk, parent);
+
+ /* Following Linux drivers/clk/clk-scmi.c, directly return 0 if agent has no permission. */
+ log_debug("%s: SCMI CLOCK: the clock's parent cannot be changed by the agent.\n", __func__);
+ return 0;
+}
+
static const struct clk_ops scmi_clk_ops = {
.enable = scmi_clk_enable,
.disable = scmi_clk_disable,
@@ -211,6 +364,7 @@
.id = UCLASS_CLK,
.ops = &scmi_clk_ops,
.probe = scmi_clk_probe,
+ .priv_auto = sizeof(struct scmi_clock_priv),
};
static struct scmi_proto_match match[] = {