Merge branch 'master' of git://www.denx.de/git/u-boot-mpc83xx
diff --git a/board/amcc/taihu/taihu.c b/board/amcc/taihu/taihu.c
index ea83671..eedde59 100644
--- a/board/amcc/taihu/taihu.c
+++ b/board/amcc/taihu/taihu.c
@@ -162,7 +162,7 @@
unsigned char spi_read(void)
{
- return (unsigned char)gpio_read_out_bit(SPI_DIN_GPIO15);
+ return (unsigned char)gpio_read_in_bit(SPI_DIN_GPIO15);
}
void taihu_spi_chipsel(int cs)
diff --git a/board/mgcoge/mgcoge.c b/board/mgcoge/mgcoge.c
index 0207a3a..e7c3fa0 100644
--- a/board/mgcoge/mgcoge.c
+++ b/board/mgcoge/mgcoge.c
@@ -278,6 +278,17 @@
return 0;
}
+/*
+ * Early board initalization.
+ */
+int board_early_init_r(void)
+{
+ /* setup the UPIOx */
+ *(char *)(CFG_PIGGY_BASE + 0x02) = 0xc0;
+ *(char *)(CFG_PIGGY_BASE + 0x03) = 0x15;
+ return 0;
+}
+
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
/*
* update "memory" property in the blob
@@ -286,7 +297,7 @@
{
int ret, nodeoffset = 0;
ulong memory_data[2] = {0};
- ulong flash_data[4] = {0};
+ ulong flash_data[8] = {0};
memory_data[0] = cpu_to_be32(bd->bi_memstart);
memory_data[1] = cpu_to_be32(bd->bi_memsize);
@@ -304,9 +315,13 @@
printf("ft_blob_update(): cannot find /memory node "
"err:%s\n", fdt_strerror(nodeoffset));
}
- /* update Flash size */
- flash_data[2] = cpu_to_be32(bd->bi_flashstart);
- flash_data[3] = cpu_to_be32(bd->bi_flashsize);
+ /* update Flash addr, size */
+ flash_data[2] = cpu_to_be32(CFG_FLASH_BASE);
+ flash_data[3] = cpu_to_be32(CFG_FLASH_SIZE);
+ flash_data[4] = cpu_to_be32(1);
+ flash_data[5] = cpu_to_be32(0);
+ flash_data[6] = cpu_to_be32(CFG_FLASH_BASE_1);
+ flash_data[7] = cpu_to_be32(CFG_FLASH_SIZE_1);
nodeoffset = fdt_path_offset (blob, "/localbus");
if (nodeoffset >= 0) {
ret = fdt_setprop(blob, nodeoffset, "ranges", flash_data,
@@ -331,7 +346,7 @@
}
else {
/* memory node is required in dts */
- printf("ft_blob_update(): cannot find /localbus node "
+ printf("ft_blob_update(): cannot find /soc/cpm/ethernet node "
"err:%s\n", fdt_strerror(nodeoffset));
}
diff --git a/board/mgsuvd/mgsuvd.c b/board/mgsuvd/mgsuvd.c
index 9fd164b..e0123bf 100644
--- a/board/mgsuvd/mgsuvd.c
+++ b/board/mgsuvd/mgsuvd.c
@@ -134,6 +134,17 @@
return (size);
}
+/*
+ * Early board initalization.
+ */
+int board_early_init_r(void)
+{
+ /* setup the UPIOx */
+ *(char *)(CFG_PIGGY_BASE + 0x02) = 0xc0;
+ *(char *)(CFG_PIGGY_BASE + 0x03) = 0x35;
+ return 0;
+}
+
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
/*
* update "memory" property in the blob
@@ -179,31 +190,31 @@
}
/* BRG */
brg_data[0] = cpu_to_be32(bd->bi_busfreq);
- nodeoffset = fdt_path_offset (blob, "/soc866/cpm");
+ nodeoffset = fdt_path_offset (blob, "/soc/cpm");
if (nodeoffset >= 0) {
ret = fdt_setprop(blob, nodeoffset, "brg-frequency", brg_data,
sizeof(brg_data));
if (ret < 0)
- printf("ft_blob_update): cannot set /soc866/cpm/brg-frequency "
+ printf("ft_blob_update): cannot set /soc/cpm/brg-frequency "
"property err:%s\n", fdt_strerror(ret));
}
else {
/* memory node is required in dts */
- printf("ft_blob_update(): cannot find /localbus node "
+ printf("ft_blob_update(): cannot find /soc/cpm node "
"err:%s\n", fdt_strerror(nodeoffset));
}
/* MAC Adresse */
- nodeoffset = fdt_path_offset (blob, "/soc866/cpm/ethernet");
+ nodeoffset = fdt_path_offset (blob, "/soc/cpm/ethernet");
if (nodeoffset >= 0) {
ret = fdt_setprop(blob, nodeoffset, "mac-address", bd->bi_enetaddr,
sizeof(uchar) * 6);
if (ret < 0)
- printf("ft_blob_update): cannot set /soc866/cpm/scc/mac-address "
+ printf("ft_blob_update): cannot set /soc/cpm/scc/mac-address "
"property err:%s\n", fdt_strerror(ret));
}
else {
/* memory node is required in dts */
- printf("ft_blob_update(): cannot find /localbus node "
+ printf("ft_blob_update(): cannot find /soc/cpm/ethernet node "
"err:%s\n", fdt_strerror(nodeoffset));
}
}
diff --git a/include/configs/mgcoge.h b/include/configs/mgcoge.h
index f4a1cc0..98facf2 100644
--- a/include/configs/mgcoge.h
+++ b/include/configs/mgcoge.h
@@ -35,6 +35,9 @@
#define CONFIG_CPM2 1 /* Has a CPM2 */
+/* Do boardspecific init */
+#define CONFIG_BOARD_EARLY_INIT_R 1
+
/*
* Select serial console configuration
*
@@ -152,8 +155,13 @@
#define CFG_FLASH_SIZE 32
#define CFG_FLASH_CFI
#define CFG_FLASH_CFI_DRIVER
-#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */
-#define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */
+#define CFG_MAX_FLASH_BANKS 2 /* max num of flash banks */
+#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */
+
+#define CFG_FLASH_BASE_1 0x50000000
+#define CFG_FLASH_SIZE_1 64
+
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, CFG_FLASH_BASE_1 }
#define CFG_MONITOR_BASE TEXT_BASE
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
@@ -246,6 +254,8 @@
* ---- --- ------- ------ ------
* 0 60x GPCM 8 bit FLASH
* 1 60x SDRAM 32 bit SDRAM
+ * 3 60x GPCM 8 bit GPIO/PIGGY
+ * 5 60x GPCM 16 bit CFG-Flash
*
*/
/* Bank 0 - FLASH
@@ -301,6 +311,27 @@
PSDMR_WRC_1C |\
PSDMR_CL_2)
+/* GPIO/PIGGY on CS3 initialization values
+*/
+#define CFG_PIGGY_BASE 0x30000000
+#define CFG_PIGGY_SIZE 128
+
+#define CFG_BR3_PRELIM ((CFG_PIGGY_BASE & BRx_BA_MSK) |\
+ BRx_PS_8 | BRx_MS_GPCM_P | BRx_V)
+
+#define CFG_OR3_PRELIM (MEG_TO_AM(CFG_PIGGY_SIZE) |\
+ ORxG_CSNT | ORxG_ACS_DIV2 |\
+ ORxG_SCY_3_CLK | ORxG_TRLX )
+
+/* CFG-Flash on CS5 initialization values
+*/
+#define CFG_BR5_PRELIM ((CFG_FLASH_BASE_1 & BRx_BA_MSK) |\
+ BRx_PS_16 | BRx_MS_GPCM_P | BRx_V)
+
+#define CFG_OR5_PRELIM (MEG_TO_AM(CFG_FLASH_SIZE_1) |\
+ ORxG_CSNT | ORxG_ACS_DIV2 |\
+ ORxG_SCY_5_CLK | ORxG_TRLX )
+
#define CFG_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */
/* pass open firmware flat tree */
diff --git a/include/configs/mgsuvd.h b/include/configs/mgsuvd.h
index 8181872..5482089 100644
--- a/include/configs/mgsuvd.h
+++ b/include/configs/mgsuvd.h
@@ -36,6 +36,9 @@
#define CONFIG_MPC866 1 /* This is a MPC866 CPU */
#define CONFIG_MGSUVD 1 /* ...on a mgsuvd board */
+/* Do boardspecific init */
+#define CONFIG_BOARD_EARLY_INIT_R 1
+
#define CONFIG_8xx_GCLK_FREQ 66000000
#define CFG_SMC_UCODE_PATCH 1 /* Relocate SMC1 */
@@ -299,7 +302,12 @@
* 64 Refresh cycle in ms per number of rows
*/
#define CFG_PTA_PER_CLK ((4096 * 64 * 1000) / (4 * 64))
-/* HS HS noch zu setzen */
+
+/* GPIO/PIGGY on CS3 initialization values
+*/
+#define CFG_PIGGY_BASE (0x30000000)
+#define CFG_OR3_PRELIM (0xfe000d24)
+#define CFG_BR3_PRELIM (0x30000401)
/*
* Internal Definitions
@@ -318,7 +326,7 @@
#define CONFIG_OF_BOARD_SETUP 1
#define OF_CPU "PowerPC,866@0"
-#define OF_SOC "soc@f0000000"
+#define OF_SOC "soc@fff00000"
#define OF_TBCLK (bd->bi_busfreq / 4)
#define OF_STDOUT_PATH "/soc/cpm/serial@a80"
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index cc910de..dfa8779 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2006-2007
+ * (C) Copyright 2006-2008
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* (C) Copyright 2006
@@ -254,11 +254,13 @@
/* Setup some board specific values for the default environment variables */
#ifndef CONFIG_RAINIER
#define CONFIG_HOSTNAME sequoia
-#define CFG_BOOTFILE "bootfile=/tftpboot/sequoia/uImage\0"
+#define CFG_BOOTFILE "bootfile=sequoia/uImage\0"
+#define CFG_DTBFILE "fdt_file=sequoia/sequoia.dtb\0"
#define CFG_ROOTPATH "rootpath=/opt/eldk/ppc_4xxFP\0"
#else
#define CONFIG_HOSTNAME rainier
-#define CFG_BOOTFILE "bootfile=/tftpboot/rainier/uImage\0"
+#define CFG_BOOTFILE "bootfile=rainier/uImage\0"
+#define CFG_DTBFILE "fdt_file=rainier/rainier.dtb\0"
#define CFG_ROOTPATH "rootpath=/opt/eldk/ppc_4xx\0"
#endif
@@ -273,12 +275,20 @@
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
- "flash_nfs=run nfsargs addip addtty;" \
+ "addmisc=setenv bootargs ${bootargs} mem=${mem}\0" \
+ "flash_nfs=run nfsargs addip addtty addmisc;" \
"bootm ${kernel_addr}\0" \
- "flash_self=run ramargs addip addtty;" \
+ "flash_self=run ramargs addip addtty addmisc;" \
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
- "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
- "bootm\0" \
+ "net_nfs=tftp 200000 ${bootfile};" \
+ "run nfsargs addip addtty addmisc;" \
+ "bootm\0" \
+ "fdt_file=sequoia/sequoia.dtb\0" \
+ "fdt_addr=400000\0" \
+ "net_nfs_fdt=tftp 200000 ${bootfile};" \
+ "tftp ${fdt_addr} ${fdt_file};" \
+ "run nfsargs addip addtty addmisc;" \
+ "bootm 200000 - ${fdt_addr}\0" \
"kernel_addr=FC000000\0" \
"ramdisk_addr=FC180000\0" \
"load=tftp 200000 /tftpboot/${hostname}/u-boot.bin\0" \