IDE: - make ide_inb () and ide_outb () "weak", so boards can
define there own I/O functions.
(Needed for the pcs440ep board).
- The default I/O Functions are again 8 Bit accesses.
- Added CONFIG_CMD_IDE for the pcs440ep Board.
Signed-off-by: Heiko Schocher <hs@denx.de>
diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h
index 03289bc..11dfa1c 100644
--- a/include/asm-ppc/io.h
+++ b/include/asm-ppc/io.h
@@ -13,6 +13,9 @@
#define SIO_CONFIG_RA 0x398
#define SIO_CONFIG_RD 0x399
+#ifndef _IO_BASE
+#define _IO_BASE 0
+#endif
#define readb(addr) in_8((volatile u8 *)(addr))
#define writeb(b,addr) out_8((volatile u8 *)(addr), (b))
diff --git a/include/configs/pcs440ep.h b/include/configs/pcs440ep.h
index 8e51d2d..7653ba1 100644
--- a/include/configs/pcs440ep.h
+++ b/include/configs/pcs440ep.h
@@ -266,7 +266,10 @@
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_ELF
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
@@ -274,12 +277,10 @@
#define CONFIG_CMD_PCI
#define CONFIG_CMD_PING
#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_REISER
#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
#define CONFIG_CMD_USB
-
#define CONFIG_SUPPORT_VFAT
/*
@@ -488,10 +489,4 @@
/* Offset for alternate registers */
#define CFG_ATA_ALT_OFFSET (0x0000)
-/* These addresses need to be shifted one place to the left
- * ( bus per_addr 20 -30 is connectsd on CF bus A10-A0)
- * These values are shifted
- */
-#define CFG_ATA_PORT_ADDR(port) ((port) << 1)
-
#endif /* __CONFIG_H */
diff --git a/include/ide.h b/include/ide.h
index 6976a6c..222f4f8 100644
--- a/include/ide.h
+++ b/include/ide.h
@@ -26,6 +26,8 @@
#define IDE_BUS(dev) (dev >> 1)
+#define ATA_CURR_BASE(dev) (CFG_ATA_BASE_ADDR+ide_bus_offset[IDE_BUS(dev)])
+
#ifdef CONFIG_IDE_LED
/*