mx6ul_14x14_evk: Simplify the PMIC register writes
There is no need to store the values written to the PMIC inside the
'reg' variable. Make it simpler by writing the values directly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
index 595ad76..636c008 100644
--- a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
+++ b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
@@ -86,16 +86,13 @@
pmic_reg_write(dev, PFUZE3000_LDOGCTL, reg);
/* SW1B step ramp up time from 2us to 4us/25mV */
- reg = 0x40;
- pmic_reg_write(dev, PFUZE3000_SW1BCONF, reg);
+ pmic_reg_write(dev, PFUZE3000_SW1BCONF, 0x40);
/* SW1B mode to APS/PFM */
- reg = 0xc;
- pmic_reg_write(dev, PFUZE3000_SW1BMODE, reg);
+ pmic_reg_write(dev, PFUZE3000_SW1BMODE, 0xc);
/* SW1B standby voltage set to 0.975V */
- reg = 0xb;
- pmic_reg_write(dev, PFUZE3000_SW1BSTBY, reg);
+ pmic_reg_write(dev, PFUZE3000_SW1BSTBY, 0xb);
return 0;
}