| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * |
| * HW data initialization for OMAP5 |
| * |
| * (C) Copyright 2013 |
| * Texas Instruments, <www.ti.com> |
| * |
| * Sricharan R <r.sricharan@ti.com> |
| */ |
| #include <common.h> |
| #include <palmas.h> |
| #include <asm/arch/omap.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/omap_common.h> |
| #include <asm/arch/clock.h> |
| #include <asm/omap_gpio.h> |
| #include <asm/io.h> |
| #include <asm/emif.h> |
| |
| struct prcm_regs const **prcm = |
| (struct prcm_regs const **) OMAP_SRAM_SCRATCH_PRCM_PTR; |
| struct dplls const **dplls_data = |
| (struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR; |
| struct vcores_data const **omap_vcores = |
| (struct vcores_data const **) OMAP_SRAM_SCRATCH_VCORES_PTR; |
| struct omap_sys_ctrl_regs const **ctrl = |
| (struct omap_sys_ctrl_regs const **)OMAP_SRAM_SCRATCH_SYS_CTRL; |
| |
| /* OPP NOM FREQUENCY for ES1.0 */ |
| static const struct dpll_params mpu_dpll_params_800mhz[NUM_SYS_CLKS] = { |
| {200, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ |
| {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ |
| {1000, 20, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ |
| {375, 8, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ |
| {400, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ |
| {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ |
| {375, 17, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ |
| }; |
| |
| /* OPP NOM FREQUENCY for OMAP5 ES2.0, and DRA7 ES1.0 */ |
| static const struct dpll_params mpu_dpll_params_1ghz[NUM_SYS_CLKS] = { |
| {250, 2, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ |
| {500, 9, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */ |
| {119, 1, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ |
| {625, 11, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ |
| {500, 12, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ |
| {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ |
| {625, 23, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ |
| }; |
| |
| static const struct dpll_params |
| core_dpll_params_2128mhz_ddr532[NUM_SYS_CLKS] = { |
| {266, 2, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 12 MHz */ |
| {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ |
| {443, 6, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 16.8 MHz */ |
| {277, 4, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 19.2 MHz */ |
| {368, 8, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 26 MHz */ |
| {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ |
| {277, 9, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1} /* 38.4 MHz */ |
| }; |
| |
| static const struct dpll_params |
| core_dpll_params_2128mhz_ddr532_es2[NUM_SYS_CLKS] = { |
| {266, 2, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 12 MHz */ |
| {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ |
| {443, 6, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 16.8 MHz */ |
| {277, 4, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 19.2 MHz */ |
| {368, 8, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 26 MHz */ |
| {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ |
| {277, 9, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6} /* 38.4 MHz */ |
| }; |
| |
| static const struct dpll_params |
| core_dpll_params_2128mhz_dra7xx[NUM_SYS_CLKS] = { |
| {266, 2, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 12 MHz */ |
| {266, 4, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 20 MHz */ |
| {443, 6, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 16.8 MHz */ |
| {277, 4, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 19.2 MHz */ |
| {368, 8, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 26 MHz */ |
| {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ |
| {277, 9, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 38.4 MHz */ |
| }; |
| |
| static const struct dpll_params per_dpll_params_768mhz[NUM_SYS_CLKS] = { |
| {32, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 12 MHz */ |
| {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ |
| {160, 6, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 16.8 MHz */ |
| {20, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 19.2 MHz */ |
| {192, 12, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 26 MHz */ |
| {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ |
| {10, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1} /* 38.4 MHz */ |
| }; |
| |
| static const struct dpll_params per_dpll_params_768mhz_es2[NUM_SYS_CLKS] = { |
| {32, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 12 MHz */ |
| {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ |
| {160, 6, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 16.8 MHz */ |
| {20, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 19.2 MHz */ |
| {192, 12, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 26 MHz */ |
| {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ |
| {10, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1} /* 38.4 MHz */ |
| }; |
| |
| static const struct dpll_params per_dpll_params_768mhz_dra7xx[NUM_SYS_CLKS] = { |
| {32, 0, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1}, /* 12 MHz */ |
| {96, 4, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 20 MHz */ |
| {160, 6, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1}, /* 16.8 MHz */ |
| {20, 0, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1}, /* 19.2 MHz */ |
| {192, 12, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1}, /* 26 MHz */ |
| {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ |
| {10, 0, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1}, /* 38.4 MHz */ |
| }; |
| |
| static const struct dpll_params per_dpll_params_768mhz_dra76x[NUM_SYS_CLKS] = { |
| {32, 0, 4, 1, 3, 4, 8, 2, -1, -1, -1, -1}, /* 12 MHz */ |
| {96, 4, 4, 1, 3, 4, 8, 2, -1, -1, -1, -1}, /* 20 MHz */ |
| {160, 6, 4, 1, 3, 4, 8, 2, -1, -1, -1, -1}, /* 16.8 MHz */ |
| {20, 0, 4, 1, 3, 4, 8, 2, -1, -1, -1, -1}, /* 19.2 MHz */ |
| {192, 12, 4, 1, 3, 4, 8, 2, -1, -1, -1, -1}, /* 26 MHz */ |
| {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ |
| {10, 0, 4, 1, 3, 4, 8, 2, -1, -1, -1, -1}, /* 38.4 MHz */ |
| }; |
| |
| static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = { |
| {1165, 11, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ |
| {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ |
| {208, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ |
| {182, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ |
| {224, 4, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ |
| {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ |
| {91, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ |
| }; |
| |
| static const struct dpll_params iva_dpll_params_2330mhz_dra7xx[NUM_SYS_CLKS] = { |
| {1165, 11, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ |
| {233, 3, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */ |
| {208, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ |
| {182, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ |
| {224, 4, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ |
| {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ |
| {91, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ |
| }; |
| |
| /* ABE M & N values with sys_clk as source */ |
| #ifdef CONFIG_SYS_OMAP_ABE_SYSCK |
| static const struct dpll_params |
| abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = { |
| {49, 5, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ |
| {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ |
| {35, 5, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ |
| {46, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ |
| {34, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ |
| {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ |
| {64, 24, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ |
| }; |
| #endif |
| |
| /* ABE M & N values with 32K clock as source */ |
| #ifndef CONFIG_SYS_OMAP_ABE_SYSCK |
| static const struct dpll_params abe_dpll_params_32k_196608khz = { |
| 750, 0, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1 |
| }; |
| #endif |
| |
| /* ABE M & N values with sysclk2(22.5792 MHz) as input */ |
| static const struct dpll_params |
| abe_dpll_params_sysclk2_361267khz[NUM_SYS_CLKS] = { |
| {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ |
| {16, 1, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */ |
| {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ |
| {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ |
| {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ |
| {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ |
| {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ |
| }; |
| |
| static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = { |
| {400, 4, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ |
| {480, 9, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */ |
| {400, 6, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ |
| {400, 7, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ |
| {480, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ |
| {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ |
| {400, 15, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ |
| }; |
| |
| static const struct dpll_params ddr_dpll_params_2664mhz[NUM_SYS_CLKS] = { |
| {111, 0, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ |
| {333, 4, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */ |
| {555, 6, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ |
| {555, 7, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ |
| {666, 12, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ |
| {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ |
| {555, 15, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ |
| }; |
| |
| static const struct dpll_params ddr_dpll_params_2128mhz[NUM_SYS_CLKS] = { |
| {266, 2, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ |
| {266, 4, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */ |
| {190, 2, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ |
| {665, 11, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ |
| {532, 12, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ |
| {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ |
| {665, 23, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */ |
| }; |
| |
| static const struct dpll_params gmac_dpll_params_2000mhz[NUM_SYS_CLKS] = { |
| {250, 2, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1}, /* 12 MHz */ |
| {250, 4, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1}, /* 20 MHz */ |
| {119, 1, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1}, /* 16.8 MHz */ |
| {625, 11, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1}, /* 19.2 MHz */ |
| {500, 12, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1}, /* 26 MHz */ |
| {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ |
| {625, 23, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1}, /* 38.4 MHz */ |
| }; |
| |
| struct dplls omap5_dplls_es1 = { |
| .mpu = mpu_dpll_params_800mhz, |
| .core = core_dpll_params_2128mhz_ddr532, |
| .per = per_dpll_params_768mhz, |
| .iva = iva_dpll_params_2330mhz, |
| #ifdef CONFIG_SYS_OMAP_ABE_SYSCK |
| .abe = abe_dpll_params_sysclk_196608khz, |
| #else |
| .abe = &abe_dpll_params_32k_196608khz, |
| #endif |
| .usb = usb_dpll_params_1920mhz, |
| .ddr = NULL |
| }; |
| |
| struct dplls omap5_dplls_es2 = { |
| .mpu = mpu_dpll_params_1ghz, |
| .core = core_dpll_params_2128mhz_ddr532_es2, |
| .per = per_dpll_params_768mhz_es2, |
| .iva = iva_dpll_params_2330mhz, |
| #ifdef CONFIG_SYS_OMAP_ABE_SYSCK |
| .abe = abe_dpll_params_sysclk_196608khz, |
| #else |
| .abe = &abe_dpll_params_32k_196608khz, |
| #endif |
| .usb = usb_dpll_params_1920mhz, |
| .ddr = NULL |
| }; |
| |
| struct dplls dra76x_dplls = { |
| .mpu = mpu_dpll_params_1ghz, |
| .core = core_dpll_params_2128mhz_dra7xx, |
| .per = per_dpll_params_768mhz_dra76x, |
| .abe = abe_dpll_params_sysclk2_361267khz, |
| .iva = iva_dpll_params_2330mhz_dra7xx, |
| .usb = usb_dpll_params_1920mhz, |
| .ddr = ddr_dpll_params_2664mhz, |
| .gmac = gmac_dpll_params_2000mhz, |
| }; |
| |
| struct dplls dra7xx_dplls = { |
| .mpu = mpu_dpll_params_1ghz, |
| .core = core_dpll_params_2128mhz_dra7xx, |
| .per = per_dpll_params_768mhz_dra7xx, |
| .abe = abe_dpll_params_sysclk2_361267khz, |
| .iva = iva_dpll_params_2330mhz_dra7xx, |
| .usb = usb_dpll_params_1920mhz, |
| .ddr = ddr_dpll_params_2128mhz, |
| .gmac = gmac_dpll_params_2000mhz, |
| }; |
| |
| struct dplls dra72x_dplls = { |
| .mpu = mpu_dpll_params_1ghz, |
| .core = core_dpll_params_2128mhz_dra7xx, |
| .per = per_dpll_params_768mhz_dra7xx, |
| .abe = abe_dpll_params_sysclk2_361267khz, |
| .iva = iva_dpll_params_2330mhz_dra7xx, |
| .usb = usb_dpll_params_1920mhz, |
| .ddr = ddr_dpll_params_2664mhz, |
| .gmac = gmac_dpll_params_2000mhz, |
| }; |
| |
| struct pmic_data palmas = { |
| .base_offset = PALMAS_SMPS_BASE_VOLT_UV, |
| .step = 10000, /* 10 mV represented in uV */ |
| /* |
| * Offset codes 1-6 all give the base voltage in Palmas |
| * Offset code 0 switches OFF the SMPS |
| */ |
| .start_code = 6, |
| .i2c_slave_addr = SMPS_I2C_SLAVE_ADDR, |
| .pmic_bus_init = sri2c_init, |
| .pmic_write = omap_vc_bypass_send_value, |
| .gpio_en = 0, |
| }; |
| |
| /* The TPS659038 and TPS65917 are software-compatible, use common struct */ |
| struct pmic_data tps659038 = { |
| .base_offset = PALMAS_SMPS_BASE_VOLT_UV, |
| .step = 10000, /* 10 mV represented in uV */ |
| /* |
| * Offset codes 1-6 all give the base voltage in Palmas |
| * Offset code 0 switches OFF the SMPS |
| */ |
| .start_code = 6, |
| .i2c_slave_addr = TPS659038_I2C_SLAVE_ADDR, |
| .pmic_bus_init = gpi2c_init, |
| .pmic_write = palmas_i2c_write_u8, |
| .gpio_en = 0, |
| }; |
| |
| /* The LP87565*/ |
| struct pmic_data lp87565 = { |
| .base_offset = LP873X_BUCK_BASE_VOLT_UV, |
| .step = 5000, /* 5 mV represented in uV */ |
| /* |
| * Offset codes 0 - 0x13 Invalid. |
| * Offset codes 0x14 0x17 give 10mV steps |
| * Offset codes 0x17 through 0x9D give 5mV steps |
| * So let us start with our operating range from .73V |
| */ |
| .start_code = 0x17, |
| .i2c_slave_addr = 0x60, |
| .pmic_bus_init = gpi2c_init, |
| .pmic_write = palmas_i2c_write_u8, |
| }; |
| |
| /* The LP8732 and LP8733 are software-compatible, use common struct */ |
| struct pmic_data lp8733 = { |
| .base_offset = LP873X_BUCK_BASE_VOLT_UV, |
| .step = 5000, /* 5 mV represented in uV */ |
| /* |
| * Offset codes 0 - 0x13 Invalid. |
| * Offset codes 0x14 0x17 give 10mV steps |
| * Offset codes 0x17 through 0x9D give 5mV steps |
| * So let us start with our operating range from .73V |
| */ |
| .start_code = 0x17, |
| .i2c_slave_addr = 0x60, |
| .pmic_bus_init = gpi2c_init, |
| .pmic_write = palmas_i2c_write_u8, |
| }; |
| |
| struct vcores_data omap5430_volts = { |
| .mpu.value[OPP_NOM] = VDD_MPU, |
| .mpu.addr = SMPS_REG_ADDR_12_MPU, |
| .mpu.pmic = &palmas, |
| |
| .core.value[OPP_NOM] = VDD_CORE, |
| .core.addr = SMPS_REG_ADDR_8_CORE, |
| .core.pmic = &palmas, |
| |
| .mm.value[OPP_NOM] = VDD_MM, |
| .mm.addr = SMPS_REG_ADDR_45_IVA, |
| .mm.pmic = &palmas, |
| }; |
| |
| struct vcores_data omap5430_volts_es2 = { |
| .mpu.value[OPP_NOM] = VDD_MPU_ES2, |
| .mpu.addr = SMPS_REG_ADDR_12_MPU, |
| .mpu.pmic = &palmas, |
| .mpu.abb_tx_done_mask = OMAP_ABB_MPU_TXDONE_MASK, |
| |
| .core.value[OPP_NOM] = VDD_CORE_ES2, |
| .core.addr = SMPS_REG_ADDR_8_CORE, |
| .core.pmic = &palmas, |
| |
| .mm.value[OPP_NOM] = VDD_MM_ES2, |
| .mm.addr = SMPS_REG_ADDR_45_IVA, |
| .mm.pmic = &palmas, |
| .mm.abb_tx_done_mask = OMAP_ABB_MM_TXDONE_MASK, |
| |
| .mpu.efuse.reg[OPP_NOM] = OMAP5_ES2_PROD_MPU_OPNO_VMIN, |
| .mpu.efuse.reg_bits = OMAP5_ES2_PROD_REGBITS, |
| |
| .core.efuse.reg[OPP_NOM] = OMAP5_ES2_PROD_CORE_OPNO_VMIN, |
| .core.efuse.reg_bits = OMAP5_ES2_PROD_REGBITS, |
| |
| .mm.efuse.reg[OPP_NOM] = OMAP5_ES2_PROD_MM_OPNO_VMIN, |
| .mm.efuse.reg_bits = OMAP5_ES2_PROD_REGBITS, |
| }; |
| |
| /* |
| * Enable essential clock domains, modules and |
| * do some additional special settings needed |
| */ |
| void enable_basic_clocks(void) |
| { |
| u32 const clk_domains_essential[] = { |
| (*prcm)->cm_l4per_clkstctrl, |
| (*prcm)->cm_l3init_clkstctrl, |
| (*prcm)->cm_memif_clkstctrl, |
| (*prcm)->cm_l4cfg_clkstctrl, |
| #ifdef CONFIG_DRIVER_TI_CPSW |
| (*prcm)->cm_gmac_clkstctrl, |
| #endif |
| 0 |
| }; |
| |
| u32 const clk_modules_hw_auto_essential[] = { |
| (*prcm)->cm_l3_gpmc_clkctrl, |
| (*prcm)->cm_memif_emif_1_clkctrl, |
| (*prcm)->cm_memif_emif_2_clkctrl, |
| (*prcm)->cm_l4cfg_l4_cfg_clkctrl, |
| (*prcm)->cm_wkup_gpio1_clkctrl, |
| (*prcm)->cm_l4per_gpio2_clkctrl, |
| (*prcm)->cm_l4per_gpio3_clkctrl, |
| (*prcm)->cm_l4per_gpio4_clkctrl, |
| (*prcm)->cm_l4per_gpio5_clkctrl, |
| (*prcm)->cm_l4per_gpio6_clkctrl, |
| (*prcm)->cm_l4per_gpio7_clkctrl, |
| (*prcm)->cm_l4per_gpio8_clkctrl, |
| #ifdef CONFIG_SCSI_AHCI_PLAT |
| (*prcm)->cm_l3init_ocp2scp3_clkctrl, |
| #endif |
| 0 |
| }; |
| |
| u32 const clk_modules_explicit_en_essential[] = { |
| (*prcm)->cm_wkup_gptimer1_clkctrl, |
| (*prcm)->cm_l3init_hsmmc1_clkctrl, |
| (*prcm)->cm_l3init_hsmmc2_clkctrl, |
| (*prcm)->cm_l4per_gptimer2_clkctrl, |
| (*prcm)->cm_wkup_wdtimer2_clkctrl, |
| (*prcm)->cm_l4per_uart1_clkctrl, |
| (*prcm)->cm_l4per_uart3_clkctrl, |
| (*prcm)->cm_l4per_i2c1_clkctrl, |
| #ifdef CONFIG_DRIVER_TI_CPSW |
| (*prcm)->cm_gmac_gmac_clkctrl, |
| #endif |
| |
| #ifdef CONFIG_TI_QSPI |
| (*prcm)->cm_l4per_qspi_clkctrl, |
| #endif |
| #ifdef CONFIG_SCSI_AHCI_PLAT |
| (*prcm)->cm_l3init_sata_clkctrl, |
| #endif |
| 0 |
| }; |
| |
| /* Enable optional additional functional clock for GPIO4 */ |
| setbits_le32((*prcm)->cm_l4per_gpio4_clkctrl, |
| GPIO4_CLKCTRL_OPTFCLKEN_MASK); |
| |
| /* Enable 192 MHz clock for MMC1 & MMC2 */ |
| setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl, |
| HSMMC_CLKCTRL_CLKSEL_MASK); |
| setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl, |
| HSMMC_CLKCTRL_CLKSEL_MASK); |
| |
| /* Set the correct clock dividers for mmc */ |
| clrbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl, |
| HSMMC_CLKCTRL_CLKSEL_DIV_MASK); |
| clrbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl, |
| HSMMC_CLKCTRL_CLKSEL_DIV_MASK); |
| |
| /* Select 32KHz clock as the source of GPTIMER1 */ |
| setbits_le32((*prcm)->cm_wkup_gptimer1_clkctrl, |
| GPTIMER1_CLKCTRL_CLKSEL_MASK); |
| |
| do_enable_clocks(clk_domains_essential, |
| clk_modules_hw_auto_essential, |
| clk_modules_explicit_en_essential, |
| 1); |
| |
| #ifdef CONFIG_TI_QSPI |
| setbits_le32((*prcm)->cm_l4per_qspi_clkctrl, (1<<24)); |
| #endif |
| |
| #ifdef CONFIG_SCSI_AHCI_PLAT |
| /* Enable optional functional clock for SATA */ |
| setbits_le32((*prcm)->cm_l3init_sata_clkctrl, |
| SATA_CLKCTRL_OPTFCLKEN_MASK); |
| #endif |
| |
| /* Enable SCRM OPT clocks for PER and CORE dpll */ |
| setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl, |
| OPTFCLKEN_SCRM_PER_MASK); |
| setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl, |
| OPTFCLKEN_SCRM_CORE_MASK); |
| } |
| |
| void enable_basic_uboot_clocks(void) |
| { |
| u32 const clk_domains_essential[] = { |
| #if defined(CONFIG_DRA7XX) |
| (*prcm)->cm_ipu_clkstctrl, |
| #endif |
| 0 |
| }; |
| |
| u32 const clk_modules_hw_auto_essential[] = { |
| (*prcm)->cm_l3init_hsusbtll_clkctrl, |
| 0 |
| }; |
| |
| u32 const clk_modules_explicit_en_essential[] = { |
| (*prcm)->cm_l4per_mcspi1_clkctrl, |
| (*prcm)->cm_l4per_i2c2_clkctrl, |
| (*prcm)->cm_l4per_i2c3_clkctrl, |
| (*prcm)->cm_l4per_i2c4_clkctrl, |
| #if defined(CONFIG_DRA7XX) |
| (*prcm)->cm_ipu_i2c5_clkctrl, |
| #else |
| (*prcm)->cm_l4per_i2c5_clkctrl, |
| #endif |
| (*prcm)->cm_l3init_hsusbhost_clkctrl, |
| (*prcm)->cm_l3init_fsusb_clkctrl, |
| 0 |
| }; |
| do_enable_clocks(clk_domains_essential, |
| clk_modules_hw_auto_essential, |
| clk_modules_explicit_en_essential, |
| 1); |
| } |
| |
| #ifdef CONFIG_TI_EDMA3 |
| void enable_edma3_clocks(void) |
| { |
| u32 const clk_domains_edma3[] = { |
| 0 |
| }; |
| |
| u32 const clk_modules_hw_auto_edma3[] = { |
| (*prcm)->cm_l3main1_tptc1_clkctrl, |
| (*prcm)->cm_l3main1_tptc2_clkctrl, |
| 0 |
| }; |
| |
| u32 const clk_modules_explicit_en_edma3[] = { |
| 0 |
| }; |
| |
| do_enable_clocks(clk_domains_edma3, |
| clk_modules_hw_auto_edma3, |
| clk_modules_explicit_en_edma3, |
| 1); |
| } |
| |
| void disable_edma3_clocks(void) |
| { |
| u32 const clk_domains_edma3[] = { |
| 0 |
| }; |
| |
| u32 const clk_modules_disable_edma3[] = { |
| (*prcm)->cm_l3main1_tptc1_clkctrl, |
| (*prcm)->cm_l3main1_tptc2_clkctrl, |
| 0 |
| }; |
| |
| do_disable_clocks(clk_domains_edma3, |
| clk_modules_disable_edma3, |
| 1); |
| } |
| #endif |
| |
| #if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP) |
| void enable_usb_clocks(int index) |
| { |
| u32 cm_l3init_usb_otg_ss_clkctrl = 0; |
| |
| if (index == 0) { |
| cm_l3init_usb_otg_ss_clkctrl = |
| (*prcm)->cm_l3init_usb_otg_ss1_clkctrl; |
| /* Enable 960 MHz clock for dwc3 */ |
| setbits_le32((*prcm)->cm_l3init_usb_otg_ss1_clkctrl, |
| OPTFCLKEN_REFCLK960M); |
| |
| /* Enable 32 KHz clock for USB_PHY1 */ |
| setbits_le32((*prcm)->cm_coreaon_usb_phy1_core_clkctrl, |
| USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K); |
| |
| /* Enable 32 KHz clock for USB_PHY3 */ |
| if (is_dra7xx()) |
| setbits_le32((*prcm)->cm_coreaon_usb_phy3_core_clkctrl, |
| USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K); |
| } else if (index == 1) { |
| cm_l3init_usb_otg_ss_clkctrl = |
| (*prcm)->cm_l3init_usb_otg_ss2_clkctrl; |
| /* Enable 960 MHz clock for dwc3 */ |
| setbits_le32((*prcm)->cm_l3init_usb_otg_ss2_clkctrl, |
| OPTFCLKEN_REFCLK960M); |
| |
| /* Enable 32 KHz clock for dwc3 */ |
| setbits_le32((*prcm)->cm_coreaon_usb_phy2_core_clkctrl, |
| USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K); |
| |
| /* Enable 60 MHz clock for USB2PHY2 */ |
| setbits_le32((*prcm)->cm_coreaon_l3init_60m_gfclk_clkctrl, |
| L3INIT_CLKCTRL_OPTFCLKEN_60M_GFCLK); |
| } |
| |
| u32 const clk_domains_usb[] = { |
| 0 |
| }; |
| |
| u32 const clk_modules_hw_auto_usb[] = { |
| (*prcm)->cm_l3init_ocp2scp1_clkctrl, |
| cm_l3init_usb_otg_ss_clkctrl, |
| 0 |
| }; |
| |
| u32 const clk_modules_explicit_en_usb[] = { |
| 0 |
| }; |
| |
| do_enable_clocks(clk_domains_usb, |
| clk_modules_hw_auto_usb, |
| clk_modules_explicit_en_usb, |
| 1); |
| } |
| |
| void disable_usb_clocks(int index) |
| { |
| u32 cm_l3init_usb_otg_ss_clkctrl = 0; |
| |
| if (index == 0) { |
| cm_l3init_usb_otg_ss_clkctrl = |
| (*prcm)->cm_l3init_usb_otg_ss1_clkctrl; |
| /* Disable 960 MHz clock for dwc3 */ |
| clrbits_le32((*prcm)->cm_l3init_usb_otg_ss1_clkctrl, |
| OPTFCLKEN_REFCLK960M); |
| |
| /* Disable 32 KHz clock for USB_PHY1 */ |
| clrbits_le32((*prcm)->cm_coreaon_usb_phy1_core_clkctrl, |
| USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K); |
| |
| /* Disable 32 KHz clock for USB_PHY3 */ |
| if (is_dra7xx()) |
| clrbits_le32((*prcm)->cm_coreaon_usb_phy3_core_clkctrl, |
| USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K); |
| } else if (index == 1) { |
| cm_l3init_usb_otg_ss_clkctrl = |
| (*prcm)->cm_l3init_usb_otg_ss2_clkctrl; |
| /* Disable 960 MHz clock for dwc3 */ |
| clrbits_le32((*prcm)->cm_l3init_usb_otg_ss2_clkctrl, |
| OPTFCLKEN_REFCLK960M); |
| |
| /* Disable 32 KHz clock for dwc3 */ |
| clrbits_le32((*prcm)->cm_coreaon_usb_phy2_core_clkctrl, |
| USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K); |
| |
| /* Disable 60 MHz clock for USB2PHY2 */ |
| clrbits_le32((*prcm)->cm_coreaon_l3init_60m_gfclk_clkctrl, |
| L3INIT_CLKCTRL_OPTFCLKEN_60M_GFCLK); |
| } |
| |
| u32 const clk_domains_usb[] = { |
| 0 |
| }; |
| |
| u32 const clk_modules_disable[] = { |
| (*prcm)->cm_l3init_ocp2scp1_clkctrl, |
| cm_l3init_usb_otg_ss_clkctrl, |
| 0 |
| }; |
| |
| do_disable_clocks(clk_domains_usb, |
| clk_modules_disable, |
| 1); |
| } |
| #endif |
| |
| const struct ctrl_ioregs ioregs_omap5430 = { |
| .ctrl_ddrch = DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN, |
| .ctrl_lpddr2ch = DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN, |
| .ctrl_ddrio_0 = DDR_IO_0_DDR2_DQ_INT_EN_ALL_DDR3_CA_DIS_ALL, |
| .ctrl_ddrio_1 = DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL, |
| .ctrl_ddrio_2 = DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL, |
| }; |
| |
| const struct ctrl_ioregs ioregs_omap5432_es1 = { |
| .ctrl_ddrch = DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL, |
| .ctrl_lpddr2ch = 0x0, |
| .ctrl_ddr3ch = DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL, |
| .ctrl_ddrio_0 = DDR_IO_0_VREF_CELLS_DDR3_VALUE, |
| .ctrl_ddrio_1 = DDR_IO_1_VREF_CELLS_DDR3_VALUE, |
| .ctrl_ddrio_2 = DDR_IO_2_VREF_CELLS_DDR3_VALUE, |
| .ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES, |
| .ctrl_emif_sdram_config_ext_final = SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES, |
| }; |
| |
| const struct ctrl_ioregs ioregs_omap5432_es2 = { |
| .ctrl_ddrch = DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2, |
| .ctrl_lpddr2ch = 0x0, |
| .ctrl_ddr3ch = DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2, |
| .ctrl_ddrio_0 = DDR_IO_0_VREF_CELLS_DDR3_VALUE_ES2, |
| .ctrl_ddrio_1 = DDR_IO_1_VREF_CELLS_DDR3_VALUE_ES2, |
| .ctrl_ddrio_2 = DDR_IO_2_VREF_CELLS_DDR3_VALUE_ES2, |
| .ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES, |
| .ctrl_emif_sdram_config_ext_final = SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES, |
| }; |
| |
| const struct ctrl_ioregs ioregs_dra7xx_es1 = { |
| .ctrl_ddrch = 0x40404040, |
| .ctrl_lpddr2ch = 0x40404040, |
| .ctrl_ddr3ch = 0x80808080, |
| .ctrl_ddrio_0 = 0x00094A40, |
| .ctrl_ddrio_1 = 0x04A52000, |
| .ctrl_ddrio_2 = 0x84210000, |
| .ctrl_emif_sdram_config_ext = 0x0001C1A7, |
| .ctrl_emif_sdram_config_ext_final = 0x0001C1A7, |
| .ctrl_ddr_ctrl_ext_0 = 0xA2000000, |
| }; |
| |
| const struct ctrl_ioregs ioregs_dra72x_es1 = { |
| .ctrl_ddrch = 0x40404040, |
| .ctrl_lpddr2ch = 0x40404040, |
| .ctrl_ddr3ch = 0x60606080, |
| .ctrl_ddrio_0 = 0x00094A40, |
| .ctrl_ddrio_1 = 0x04A52000, |
| .ctrl_ddrio_2 = 0x84210000, |
| .ctrl_emif_sdram_config_ext = 0x0001C1A7, |
| .ctrl_emif_sdram_config_ext_final = 0x0001C1A7, |
| .ctrl_ddr_ctrl_ext_0 = 0xA2000000, |
| }; |
| |
| const struct ctrl_ioregs ioregs_dra72x_es2 = { |
| .ctrl_ddrch = 0x40404040, |
| .ctrl_lpddr2ch = 0x40404040, |
| .ctrl_ddr3ch = 0x60606060, |
| .ctrl_ddrio_0 = 0x00094A40, |
| .ctrl_ddrio_1 = 0x00000000, |
| .ctrl_ddrio_2 = 0x00000000, |
| .ctrl_emif_sdram_config_ext = 0x0001C1A7, |
| .ctrl_emif_sdram_config_ext_final = 0x0001C1A7, |
| .ctrl_ddr_ctrl_ext_0 = 0xA2000000, |
| }; |
| |
| void __weak hw_data_init(void) |
| { |
| u32 omap_rev = omap_revision(); |
| |
| switch (omap_rev) { |
| |
| case OMAP5430_ES1_0: |
| case OMAP5432_ES1_0: |
| *prcm = &omap5_es1_prcm; |
| *dplls_data = &omap5_dplls_es1; |
| *omap_vcores = &omap5430_volts; |
| *ctrl = &omap5_ctrl; |
| break; |
| |
| case OMAP5430_ES2_0: |
| case OMAP5432_ES2_0: |
| *prcm = &omap5_es2_prcm; |
| *dplls_data = &omap5_dplls_es2; |
| *omap_vcores = &omap5430_volts_es2; |
| *ctrl = &omap5_ctrl; |
| break; |
| |
| case DRA762_ABZ_ES1_0: |
| case DRA762_ACD_ES1_0: |
| case DRA762_ES1_0: |
| *prcm = &dra7xx_prcm; |
| *dplls_data = &dra76x_dplls; |
| *ctrl = &dra7xx_ctrl; |
| break; |
| |
| case DRA752_ES1_0: |
| case DRA752_ES1_1: |
| case DRA752_ES2_0: |
| *prcm = &dra7xx_prcm; |
| *dplls_data = &dra7xx_dplls; |
| *ctrl = &dra7xx_ctrl; |
| break; |
| |
| case DRA722_ES1_0: |
| case DRA722_ES2_0: |
| case DRA722_ES2_1: |
| *prcm = &dra7xx_prcm; |
| *dplls_data = &dra72x_dplls; |
| *ctrl = &dra7xx_ctrl; |
| break; |
| |
| default: |
| printf("\n INVALID OMAP REVISION "); |
| } |
| } |
| |
| void get_ioregs(const struct ctrl_ioregs **regs) |
| { |
| u32 omap_rev = omap_revision(); |
| |
| switch (omap_rev) { |
| case OMAP5430_ES1_0: |
| case OMAP5430_ES2_0: |
| *regs = &ioregs_omap5430; |
| break; |
| case OMAP5432_ES1_0: |
| *regs = &ioregs_omap5432_es1; |
| break; |
| case OMAP5432_ES2_0: |
| *regs = &ioregs_omap5432_es2; |
| break; |
| case DRA752_ES1_0: |
| case DRA752_ES1_1: |
| case DRA752_ES2_0: |
| case DRA762_ES1_0: |
| case DRA762_ACD_ES1_0: |
| case DRA762_ABZ_ES1_0: |
| *regs = &ioregs_dra7xx_es1; |
| break; |
| case DRA722_ES1_0: |
| *regs = &ioregs_dra72x_es1; |
| break; |
| case DRA722_ES2_0: |
| case DRA722_ES2_1: |
| *regs = &ioregs_dra72x_es2; |
| break; |
| |
| default: |
| printf("\n INVALID OMAP REVISION "); |
| } |
| } |