include: configs: Enable DWC3 and DFU in DRA7xx
Enabled dwc3, dwc3-omap and PHY for dwc3 are enabled. Also enabled
support for DFU.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 8fe0e6c..e78cc69 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -43,6 +43,47 @@
"uuid_disk=${uuid_gpt_disk};" \
"name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
+#define DFU_ALT_INFO_MMC \
+ "dfu_alt_info_mmc=" \
+ "boot part 0 1;" \
+ "rootfs part 0 2;" \
+ "MLO fat 0 1;" \
+ "MLO.raw raw 0x100 0x100;" \
+ "u-boot.img.raw raw 0x300 0x400;" \
+ "spl-os-args.raw raw 0x80 0x80;" \
+ "spl-os-image.raw raw 0x900 0x2000;" \
+ "spl-os-args fat 0 1;" \
+ "spl-os-image fat 0 1;" \
+ "u-boot.img fat 0 1;" \
+ "uEnv.txt fat 0 1\0"
+
+#define DFU_ALT_INFO_EMMC \
+ "dfu_alt_info_emmc=" \
+ "rawemmc raw 0 3751936;" \
+ "boot part 1 1;" \
+ "rootfs part 1 2;" \
+ "MLO fat 1 1;" \
+ "MLO.raw raw 0x100 0x100;" \
+ "u-boot.img.raw raw 0x300 0x400;" \
+ "spl-os-args.raw raw 0x80 0x80;" \
+ "spl-os-image.raw raw 0x900 0x2000;" \
+ "spl-os-args fat 1 1;" \
+ "spl-os-image fat 1 1;" \
+ "u-boot.img fat 1 1;" \
+ "uEnv.txt fat 1 1\0"
+
+#define DFU_ALT_INFO_RAM \
+ "dfu_alt_info_ram=" \
+ "kernel ram 0x80200000 0x4000000;" \
+ "fdt ram 0x80f80000 0x80000;" \
+ "ramdisk ram 0x81000000 0x4000000\0"
+
+#define DFUARGS \
+ "dfu_bufsiz=0x10000\0" \
+ DFU_ALT_INFO_MMC \
+ DFU_ALT_INFO_EMMC \
+ DFU_ALT_INFO_RAM
+
#include <configs/ti_omap5_common.h>
/* Enhance our eMMC support / experience. */
@@ -131,6 +172,28 @@
#define CONFIG_OMAP_USB_PHY
#define CONFIG_OMAP_USB2PHY2_HOST
+/* USB GADGET */
+#define CONFIG_USB_DWC3_PHY_OMAP
+#define CONFIG_USB_DWC3_OMAP
+#define CONFIG_USB_DWC3
+#define CONFIG_USB_DWC3_GADGET
+
+#define CONFIG_USB_GADGET
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_VBUS_DRAW 2
+#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
+#define CONFIG_G_DNL_VENDOR_NUM 0x0403
+#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00
+#define CONFIG_USB_GADGET_DUALSPEED
+
+/* USB Device Firmware Update support */
+#define CONFIG_DFU_FUNCTION
+#define CONFIG_DFU_RAM
+#define CONFIG_CMD_DFU
+
+#define CONFIG_DFU_MMC
+#define CONFIG_DFU_RAM
+
/* SATA */
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_CMD_SCSI