arm: armv8: Improve SPL data save and restore implementation
Introduce a new symbol in the beginning of .data section in
the common ARMv8 linker script and use that as a reference
for data save and restore.
Previously, the code would rely on calculating the start of
the .data section address via data size, however, we observed
that the data size does not really reflect the SPL mapped
addresses.
In our case, the binman_sym section size was not included in
the data size, which will result in a wrong address for the
.data start section, which prevents us from properly saving
and restoring SPL data.
This approach skips the calculation for the starting address
of the .data section, and instead just defines the beginning
address of the .data section and calling the symbol as needed,
in which we think as a simpler and much more robust method.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@altera.com>
Signed-off-by: Tien Fong Chee <tien.fong.chee@altera.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@altera.com>
diff --git a/arch/arm/cpu/armv8/spl_data.c b/arch/arm/cpu/armv8/spl_data.c
index 259b49f..492353c 100644
--- a/arch/arm/cpu/armv8/spl_data.c
+++ b/arch/arm/cpu/armv8/spl_data.c
@@ -5,23 +5,28 @@
#include <spl.h>
+char __data_start[0] __section(".__data_start");
char __data_save_start[0] __section(".__data_save_start");
char __data_save_end[0] __section(".__data_save_end");
u32 cold_reboot_flag = 1;
+u32 __weak reset_flag(void)
+{
+ return 1;
+}
+
void spl_save_restore_data(void)
{
u32 data_size = __data_save_end - __data_save_start;
+ cold_reboot_flag = reset_flag();
if (cold_reboot_flag == 1) {
/* Save data section to data_save section */
- memcpy(__data_save_start, __data_save_start - data_size,
- data_size);
+ memcpy(__data_save_start, __data_start, data_size);
} else {
/* Restore the data_save section to data section */
- memcpy(__data_save_start - data_size, __data_save_start,
- data_size);
+ memcpy(__data_start, __data_save_start, data_size);
}
cold_reboot_flag++;
diff --git a/arch/arm/cpu/armv8/u-boot-spl.lds b/arch/arm/cpu/armv8/u-boot-spl.lds
index fed6964..c4f83ec 100644
--- a/arch/arm/cpu/armv8/u-boot-spl.lds
+++ b/arch/arm/cpu/armv8/u-boot-spl.lds
@@ -37,6 +37,7 @@
.data : {
. = ALIGN(8);
+ *(.__data_start)
*(.data*)
} >.sram
diff --git a/arch/arm/mach-socfpga/spl_agilex5.c b/arch/arm/mach-socfpga/spl_agilex5.c
index c87e9ed..3451611 100644
--- a/arch/arm/mach-socfpga/spl_agilex5.c
+++ b/arch/arm/mach-socfpga/spl_agilex5.c
@@ -21,11 +21,32 @@
DECLARE_GLOBAL_DATA_PTR;
+u32 reset_flag(void)
+{
+ /* Check rstmgr.stat for warm reset status */
+ u32 status = readl(SOCFPGA_RSTMGR_ADDRESS);
+
+ /* Check whether any L4 watchdogs or SDM had triggered warm reset */
+ u32 warm_reset_mask = RSTMGR_L4WD_MPU_WARMRESET_MASK;
+
+ if (status & warm_reset_mask)
+ return 0;
+
+ return 1;
+}
+
void board_init_f(ulong dummy)
{
int ret;
struct udevice *dev;
+ /* Enable Async */
+ asm volatile("msr daifclr, #4");
+
+#ifdef CONFIG_SPL_BUILD
+ spl_save_restore_data();
+#endif
+
ret = spl_early_init();
if (ret)
hang();
diff --git a/configs/socfpga_agilex5_defconfig b/configs/socfpga_agilex5_defconfig
index 10686a0..61ce065 100644
--- a/configs/socfpga_agilex5_defconfig
+++ b/configs/socfpga_agilex5_defconfig
@@ -97,3 +97,4 @@
CONFIG_BLOBLIST_SIZE=0x1000
CONFIG_BLOBLIST_ADDR=0x7e000
CONFIG_HANDOFF=y
+CONFIG_SPL_RECOVER_DATA_SECTION=y