diff --git a/board/xilinx/zynqmp/Makefile b/board/xilinx/zynqmp/Makefile
index 80f8ca7..b4d39ed 100644
--- a/board/xilinx/zynqmp/Makefile
+++ b/board/xilinx/zynqmp/Makefile
@@ -33,6 +33,11 @@
 obj-y += $(init-objs)
 endif
 
+ifneq ($(CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE),"")
+obj-$(CONFIG_SPL_BUILD) += pm_cfg_obj.o
+$(obj)/pm_cfg_obj.o: $(shell cd $(srctree); readlink -f $(CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE)) FORCE
+endif
+
 obj-$(CONFIG_MMC_SDHCI_ZYNQ) += tap_delays.o
 
 ifndef CONFIG_SPL_BUILD
diff --git a/board/xilinx/zynqmp/pm_cfg_obj.S b/board/xilinx/zynqmp/pm_cfg_obj.S
new file mode 100644
index 0000000..c4ca77e
--- /dev/null
+++ b/board/xilinx/zynqmp/pm_cfg_obj.S
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+.section .rodata
+
+.global zynqmp_pm_cfg_obj
+.type   zynqmp_pm_cfg_obj, @object
+.global zynqmp_pm_cfg_obj_size
+.type   zynqmp_pm_cfg_obj_size, @object
+
+zynqmp_pm_cfg_obj:
+.align 4
+.incbin CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE
+
+zynqmp_pm_cfg_obj_end:
+
+zynqmp_pm_cfg_obj_size:
+.int zynqmp_pm_cfg_obj_end - zynqmp_pm_cfg_obj
diff --git a/board/xilinx/zynqmp/pm_cfg_obj.h b/board/xilinx/zynqmp/pm_cfg_obj.h
new file mode 100644
index 0000000..86e7854
--- /dev/null
+++ b/board/xilinx/zynqmp/pm_cfg_obj.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * (C) Copyright 2019 Luca Ceresoli <luca@lucaceresoli.net>
+ *
+ * Declaration of PMU config object binary blob linked in at build time.
+ */
+
+extern const u32 zynqmp_pm_cfg_obj[];
+extern const int zynqmp_pm_cfg_obj_size;
diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
index c840e92..057ca1f 100644
--- a/board/xilinx/zynqmp/zynqmp.c
+++ b/board/xilinx/zynqmp/zynqmp.c
@@ -22,6 +22,8 @@
 #include <zynqmppl.h>
 #include <g_dnl.h>
 
+#include "pm_cfg_obj.h"
+
 DECLARE_GLOBAL_DATA_PTR;
 
 #if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \
@@ -327,6 +329,13 @@
 
 int board_init(void)
 {
+#if defined(CONFIG_SPL_BUILD)
+	/* Check *at build time* if the filename is an non-empty string */
+	if (sizeof(CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE) > 1)
+		zynqmp_pmufw_load_config_object(zynqmp_pm_cfg_obj,
+						zynqmp_pm_cfg_obj_size);
+#endif
+
 	printf("EL Level:\tEL%d\n", current_el());
 
 #if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ZYNQMPPL) && \