colibri-imx7d/-emmc: synchronise device tree with linux
Synchronise device tree with linux-next next-20220708.
Please note that this also means that instead of the previous "generic"
U-Boot specific carrier board agnostic device trees we are now using the
regular ones for the Colibri Evaluation (carrier) board V3 (e.g.
imx7d-colibri-eval-v3.dtb rather than the previous
imx7-colibri-rawnand.dtb and imx7d-colibri-emmc-eval-v3.dtb rather than
the previous imx7-colibri-emmc.dtb).
Please further note that the PMIC node name got changed from rn5t567@33
to pmic@33 which required adjustment in resp. board file
board/toradex/colibri_imx7/colibri_imx7.c.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
diff --git a/arch/arm/dts/imx7d-colibri-eval-v3.dts b/arch/arm/dts/imx7d-colibri-eval-v3.dts
new file mode 100644
index 0000000..c7a8b5a
--- /dev/null
+++ b/arch/arm/dts/imx7d-colibri-eval-v3.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2016-2022 Toradex
+ */
+
+/dts-v1/;
+#include "imx7d-colibri.dtsi"
+#include "imx7-colibri-eval-v3.dtsi"
+
+/ {
+ model = "Toradex Colibri iMX7D on Colibri Evaluation Board V3";
+ compatible = "toradex,colibri-imx7d-eval-v3",
+ "toradex,colibri-imx7d",
+ "fsl,imx7d";
+};
+
+&ad7879_ts {
+ status = "okay";
+};
+
+/*
+ * The Atmel maxtouch controller uses SODIMM 28/30, also used for PWM<B>, PWM<C>, aka pwm2, pwm3.
+ * So if you enable following capacitive touch controller, disable pwm2/pwm3 first.
+ */
+&atmel_mxt_ts {
+ status = "disabled";
+};
+
+&backlight {
+ status = "okay";
+};
+
+&lcdif {
+ status = "okay";
+};
+
+&panel_dpi {
+ status = "okay";
+};
+
+/* Colibri PWM<B> */
+&pwm2 {
+ /* The pwm2 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+ status = "okay";
+};
+
+/* Colibri PWM<C> */
+&pwm3 {
+ /* The pwm3 should be disabled to enable atmel_mxt_ts touchscreen for adapter. */
+ status = "okay";
+};
+
+/* Colibri USBH */
+&usbotg2 {
+ status = "okay";
+};