ARM: rmobile: salvator-x: Add R8A7796 support
Add minor ifdeffery and default board config for the Salvator-XS board
with R8A7796 M3 SoC.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
diff --git a/board/renesas/salvator-x/MAINTAINERS b/board/renesas/salvator-x/MAINTAINERS
index 33c105d..f7b98fb 100644
--- a/board/renesas/salvator-x/MAINTAINERS
+++ b/board/renesas/salvator-x/MAINTAINERS
@@ -4,3 +4,4 @@
F: board/renesas/salvator-x/
F: include/configs/salvator-x.h
F: configs/r8a7795_salvator-x_defconfig
+F: configs/r8a7796_salvator-x_defconfig
diff --git a/board/renesas/salvator-x/salvator-x.c b/board/renesas/salvator-x/salvator-x.c
index 14385d7..6270de4 100644
--- a/board/renesas/salvator-x/salvator-x.c
+++ b/board/renesas/salvator-x/salvator-x.c
@@ -1,6 +1,6 @@
/*
* board/renesas/salvator-x/salvator-x.c
- * This file is Salvator-X board support.
+ * This file is Salvator-X/Salvator-XS board support.
*
* Copyright (C) 2015-2017 Renesas Electronics Corporation
* Copyright (C) 2015 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
@@ -98,14 +98,20 @@
gd->bd->bi_boot_params = CONFIG_SYS_TEXT_BASE + 0x50000;
/* Init PFC controller */
+#if defined(CONFIG_R8A7795)
r8a7795_pinmux_init();
+#elif defined(CONFIG_R8A7796)
+ r8a7796_pinmux_init();
+#endif
+#if defined(CONFIG_R8A7795)
/* GSX: force power and clock supply */
writel(0x0000001F, SYSC_PWRONCR2);
while (readl(SYSC_PWRSR2) != 0x000003E0)
mdelay(20);
mstp_clrbits_le32(MSTPSR1, SMSTPCR1, GSX_MSTP112);
+#endif
/* USB1 pull-up */
setbits_le32(PFC_PUEN6, PUEN_USB1_OVC | PUEN_USB1_PWEN);
@@ -134,6 +140,7 @@
/* IPSR3 */
gpio_request(GPIO_FN_AVB_AVTP_CAPTURE_B, NULL);
+#if defined(CONFIG_R8A7795)
/* USB2_OVC */
gpio_request(GPIO_GP_6_15, NULL);
gpio_direction_input(GPIO_GP_6_15);
@@ -142,7 +149,7 @@
gpio_request(GPIO_GP_6_14, NULL);
gpio_direction_output(GPIO_GP_6_14, 1);
gpio_set_value(GPIO_GP_6_14, 1);
-
+#endif
/* AVB_PHY_RST */
gpio_request(GPIO_GP_2_10, NULL);
gpio_direction_output(GPIO_GP_2_10, 0);
@@ -200,7 +207,13 @@
gpio_request(GPIO_GFN_SD2_DAT2, NULL);
gpio_request(GPIO_GFN_SD2_DAT3, NULL);
gpio_request(GPIO_GFN_SD2_CLK, NULL);
+#if defined(CONFIG_R8A7795)
gpio_request(GPIO_GFN_SD2_CMD, NULL);
+#elif defined(CONFIG_R8A7796)
+ gpio_request(GPIO_FN_SD2_CMD, NULL);
+#else
+#error Only R8A7795 and R87796 is supported
+#endif
gpio_request(GPIO_GP_5_3, NULL);
gpio_request(GPIO_GP_5_9, NULL);
gpio_direction_output(GPIO_GP_5_3, 0); /* 1: 3.3V, 0: 1.8V */
@@ -211,6 +224,7 @@
if (ret)
return ret;
+#if defined(CONFIG_R8A7795)
/* SDHI3 */
gpio_request(GPIO_GFN_SD3_DAT0, NULL); /* GP_4_9 */
gpio_request(GPIO_GFN_SD3_DAT1, NULL); /* GP_4_10 */
@@ -218,6 +232,16 @@
gpio_request(GPIO_GFN_SD3_DAT3, NULL); /* GP_4_12 */
gpio_request(GPIO_GFN_SD3_CLK, NULL); /* GP_4_7 */
gpio_request(GPIO_GFN_SD3_CMD, NULL); /* GP_4_8 */
+#elif defined(CONFIG_R8A7796)
+ gpio_request(GPIO_FN_SD3_DAT0, NULL); /* GP_4_9 */
+ gpio_request(GPIO_FN_SD3_DAT1, NULL); /* GP_4_10 */
+ gpio_request(GPIO_FN_SD3_DAT2, NULL); /* GP_4_11 */
+ gpio_request(GPIO_FN_SD3_DAT3, NULL); /* GP_4_12 */
+ gpio_request(GPIO_FN_SD3_CLK, NULL); /* GP_4_7 */
+ gpio_request(GPIO_FN_SD3_CMD, NULL); /* GP_4_8 */
+#else
+#error Only R8A7795 and R87796 is supported
+#endif
/* IPSR10 */
gpio_request(GPIO_FN_SD3_CD, NULL);
gpio_request(GPIO_FN_SD3_WP, NULL);