defconfigs: Add config for DRA7xx High Security EVM with USB Boot support

Add a new defconfig file for the DRA7xx High Security EVM. This config
is specific for the case of USB booting.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
diff --git a/configs/dra7xx_hs_evm_usb_defconfig b/configs/dra7xx_hs_evm_usb_defconfig
new file mode 100644
index 0000000..378b3d7
--- /dev/null
+++ b/configs/dra7xx_hs_evm_usb_defconfig
@@ -0,0 +1,113 @@
+CONFIG_ARM=y
+CONFIG_ARCH_OMAP2PLUS=y
+CONFIG_TI_SECURE_DEVICE=y
+CONFIG_TI_COMMON_CMD_OPTIONS=y
+CONFIG_SYS_MALLOC_F_LEN=0x18000
+CONFIG_OMAP54XX=y
+CONFIG_TI_SECURE_EMIF_REGION_START=0xbdb00000
+CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE=0x02000000
+CONFIG_TI_SECURE_EMIF_PROTECTED_REGION_SIZE=0x01c00000
+CONFIG_ISW_ENTRY_ADDR=0x40306d50
+CONFIG_TARGET_DRA7XX_EVM=y
+CONFIG_SPL=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_ARMV7_LPAE=y
+CONFIG_AHCI=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_FIT_IMAGE_POST_PROCESS=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="androidboot.serialno=${serial#} console=ttyS0,115200 androidboot.console=ttyS0 androidboot.hardware=jacinto6evmboard"
+# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+# CONFIG_MISC_INIT_R is not set
+CONFIG_VERSION_VARIABLE=y
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SPL_DMA_SUPPORT=y
+# CONFIG_SPL_NAND_SUPPORT is not set
+CONFIG_SPL_RAM_SUPPORT=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SPL_USB_GADGET=y
+CONFIG_SPL_DFU=y
+CONFIG_SPL_YMODEM_SUPPORT=y
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="dra7-evm"
+CONFIG_OF_LIST="dra7-evm dra72-evm dra72-evm-revc dra71-evm dra76-evm"
+CONFIG_SPL_MULTI_DTB_FIT=y
+CONFIG_SPL_MULTI_DTB_FIT_UNCOMPRESS_SZ=0x9000
+CONFIG_OF_SPL_REMOVE_PROPS="clocks clock-names interrupt-parent"
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_DM=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_DM_DEVICE_REMOVE=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SPL_SYSCON=y
+CONFIG_SPL_OF_TRANSLATE=y
+CONFIG_DWC_AHCI=y
+CONFIG_DFU_MMC=y
+CONFIG_DFU_RAM=y
+CONFIG_DFU_SF=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x82000000
+CONFIG_FASTBOOT_BUF_SIZE=0x2F000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=1
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_DM_GPIO=y
+CONFIG_PCF8575_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_MISC=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS200_SUPPORT=y
+CONFIG_SPL_MMC_HS200_SUPPORT=y
+CONFIG_MMC_OMAP_HS=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_DM_ETH=y
+CONFIG_PHY_GIGE=y
+CONFIG_MII=y
+CONFIG_DRIVER_TI_CPSW=y
+CONFIG_SPL_PHY=y
+CONFIG_PIPE3_PHY=y
+CONFIG_OMAP_USB2_PHY=y
+CONFIG_PMIC_PALMAS=y
+CONFIG_PMIC_LP873X=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_REGULATOR_PALMAS=y
+CONFIG_DM_REGULATOR_LP873X=y
+CONFIG_DM_SCSI=y
+CONFIG_DM_SERIAL=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_TI_QSPI=y
+CONFIG_TIMER=y
+CONFIG_OMAP_TIMER=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_DM_USB_GADGET=y
+CONFIG_SPL_DM_USB_GADGET=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GADGET=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0451
+CONFIG_USB_GADGET_PRODUCT_NUM=0xd022