i.MX7ULP: evk: Modify FDT file to disable SD3.0 for usb boot

Since the SD3.0 kernel driver needs M4 image support, this causes
problem for usb boot booting into kernel.  To decouple the relationship,
we modify the FDT file in u-boot to disable SD3.0.
So the kernel won't depend on M4 image.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
diff --git a/board/freescale/mx7ulp_evk/mx7ulp_evk.c b/board/freescale/mx7ulp_evk/mx7ulp_evk.c
index 3a12fe1..7527263 100644
--- a/board/freescale/mx7ulp_evk/mx7ulp_evk.c
+++ b/board/freescale/mx7ulp_evk/mx7ulp_evk.c
@@ -4,10 +4,12 @@
  */
 
 #include <common.h>
+#include <fdt_support.h>
 #include <asm/io.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/mx7ulp-pins.h>
 #include <asm/arch/iomux.h>
+#include <asm/mach-imx/boot_mode.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -45,3 +47,48 @@
 
 	return 0;
 }
+
+#if IS_ENABLED(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *blob, bd_t *bd)
+{
+	const char *path;
+	int rc, nodeoff;
+
+	if (get_boot_device() == USB_BOOT) {
+		path = fdt_get_alias(blob, "mmc0");
+		if (!path) {
+			puts("Not found mmc0\n");
+			return 0;
+		}
+
+		nodeoff = fdt_path_offset(blob, path);
+		if (nodeoff < 0)
+			return 0;
+
+		printf("Found usdhc0 node\n");
+		if (fdt_get_property(blob, nodeoff, "vqmmc-supply",
+		    NULL) != NULL) {
+			rc = fdt_delprop(blob, nodeoff, "vqmmc-supply");
+			if (!rc) {
+				puts("Removed vqmmc-supply property\n");
+add:
+				rc = fdt_setprop(blob, nodeoff,
+						 "no-1-8-v", NULL, 0);
+				if (rc == -FDT_ERR_NOSPACE) {
+					rc = fdt_increase_size(blob, 32);
+					if (!rc)
+						goto add;
+				} else if (rc) {
+					printf("Failed to add no-1-8-v property, %d\n", rc);
+				} else {
+					puts("Added no-1-8-v property\n");
+				}
+			} else {
+				printf("Failed to remove vqmmc-supply property, %d\n", rc);
+			}
+		}
+	}
+
+	return 0;
+}
+#endif
diff --git a/configs/mx7ulp_evk_defconfig b/configs/mx7ulp_evk_defconfig
index df85443..dc6cc2b 100644
--- a/configs/mx7ulp_evk_defconfig
+++ b/configs/mx7ulp_evk_defconfig
@@ -3,6 +3,7 @@
 CONFIG_SYS_TEXT_BASE=0x67800000
 CONFIG_TARGET_MX7ULP_EVK=y
 CONFIG_NR_DRAM_BANKS=1
+CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7ulp_evk/imximage.cfg"
 CONFIG_BOUNCE_BUFFER=y
 CONFIG_HUSH_PARSER=y