freescale/layerscape: Rename the config CONFIG_SECURE_BOOT name

Rename CONFIG_SECURE_BOOT to CONFIG_NXP_ESBC to avoid conflict
with UEFI secure boot.

Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
diff --git a/arch/arm/cpu/armv7/ls102xa/Kconfig b/arch/arm/cpu/armv7/ls102xa/Kconfig
index 94fa6825..b9511da 100644
--- a/arch/arm/cpu/armv7/ls102xa/Kconfig
+++ b/arch/arm/cpu/armv7/ls102xa/Kconfig
@@ -50,8 +50,8 @@
 	  cores, count the reserved ports. This will allocate enough memory
 	  in spin table to properly handle all cores.
 
-config SECURE_BOOT
-	bool	"Secure Boot"
+config NXP_ESBC
+	bool	"NXP_ESBC"
 	help
 		Enable Freescale Secure Boot feature. Normally selected
 		by defconfig. If unsure, do not change.
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index 046dcf5..f1578b1 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -376,8 +376,8 @@
 	 Enable the EMC2305 fan controller for configuration of fan
 	 speed.
 
-config SECURE_BOOT
-	bool "Secure Boot"
+config NXP_ESBC
+	bool "NXP_ESBC"
 	help
 		Enable Freescale Secure Boot feature
 
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/spl.c b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
index 8eeeef1..3f6a5f6 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/spl.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/spl.c
@@ -34,7 +34,7 @@
 
 void spl_board_init(void)
 {
-#if defined(CONFIG_SECURE_BOOT) && defined(CONFIG_FSL_LSCH2)
+#if defined(CONFIG_NXP_ESBC) && defined(CONFIG_FSL_LSCH2)
 	/*
 	 * In case of Secure Boot, the IBR configures the SMMU
 	 * to allow only Secure transactions.
diff --git a/board/freescale/common/Kconfig b/board/freescale/common/Kconfig
index 8b89c10..1b1fd69 100644
--- a/board/freescale/common/Kconfig
+++ b/board/freescale/common/Kconfig
@@ -1,5 +1,5 @@
 config CHAIN_OF_TRUST
-	depends on !FIT_SIGNATURE && SECURE_BOOT
+	depends on !FIT_SIGNATURE && NXP_ESBC
 	imply CMD_BLOB
 	imply CMD_HASH if ARM
 	select FSL_CAAM
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index a9d61a8..b0e109f 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -75,7 +75,7 @@
 
 obj-$(CONFIG_LAYERSCAPE_NS_ACCESS)	+= ns_access.o
 
-ifdef CONFIG_SECURE_BOOT
+ifdef CONFIG_NXP_ESBC
 obj-$(CONFIG_CMD_ESBC_VALIDATE) += fsl_validate.o cmd_esbc_validate.o
 endif
 obj-$(CONFIG_CHAIN_OF_TRUST) += fsl_chain_of_trust.o
diff --git a/board/freescale/ls1043ardb/ls1043ardb.c b/board/freescale/ls1043ardb/ls1043ardb.c
index fbd9a26..9bc78d6 100644
--- a/board/freescale/ls1043ardb/ls1043ardb.c
+++ b/board/freescale/ls1043ardb/ls1043ardb.c
@@ -196,7 +196,7 @@
 	init_final_memctl_regs();
 #endif
 
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 	/* In case of Secure Boot, the IBR configures the SMMU
 	 * to allow only Secure transactions.
 	 * SMMU must be reset in bypass mode.
diff --git a/board/freescale/ls1046afrwy/ls1046afrwy.c b/board/freescale/ls1046afrwy/ls1046afrwy.c
index 41412a7..ac2f8ee 100644
--- a/board/freescale/ls1046afrwy/ls1046afrwy.c
+++ b/board/freescale/ls1046afrwy/ls1046afrwy.c
@@ -126,7 +126,7 @@
 
 int board_init(void)
 {
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 	/*
 	 * In case of Secure Boot, the IBR configures the SMMU
 	 * to allow only Secure transactions.
diff --git a/board/freescale/ls1046aqds/ls1046aqds.c b/board/freescale/ls1046aqds/ls1046aqds.c
index b71c174..6a51dcd 100644
--- a/board/freescale/ls1046aqds/ls1046aqds.c
+++ b/board/freescale/ls1046aqds/ls1046aqds.c
@@ -407,7 +407,7 @@
 	ppa_init();
 #endif
 
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 	/*
 	 * In case of Secure Boot, the IBR configures the SMMU
 	 * to allow only Secure transactions.
diff --git a/board/freescale/ls1046ardb/ls1046ardb.c b/board/freescale/ls1046ardb/ls1046ardb.c
index 0a73fe8..cc6bd88 100644
--- a/board/freescale/ls1046ardb/ls1046ardb.c
+++ b/board/freescale/ls1046ardb/ls1046ardb.c
@@ -69,7 +69,7 @@
 {
 	struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
 
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 	/*
 	 * In case of Secure Boot, the IBR configures the SMMU
 	 * to allow only Secure transactions.
diff --git a/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig b/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig
index 3b1568f..58b5d75 100644
--- a/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig
@@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1012AFRWY=y
 CONFIG_SYS_TEXT_BASE=0x40100000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_AHCI=y
diff --git a/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig b/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig
index 640a462..7c0a4a7 100644
--- a/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig
@@ -2,7 +2,7 @@
 CONFIG_TARGET_LS1012AFRWY=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
diff --git a/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig
index f011aa0..fbdeef3 100644
--- a/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1012aqds_tfa_SECURE_BOOT_defconfig
@@ -2,7 +2,7 @@
 CONFIG_TARGET_LS1012AQDS=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
diff --git a/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig
index 533e251..c0f8299 100644
--- a/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig
@@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1012ARDB=y
 CONFIG_SYS_TEXT_BASE=0x40100000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_NR_DRAM_BANKS=2
diff --git a/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig
index f3a2a13..a98f02c 100644
--- a/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1012ardb_tfa_SECURE_BOOT_defconfig
@@ -2,7 +2,7 @@
 CONFIG_TARGET_LS1012ARDB=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
diff --git a/configs/ls1021aqds_nor_SECURE_BOOT_defconfig b/configs/ls1021aqds_nor_SECURE_BOOT_defconfig
index 43b3f6d..8dcd414 100644
--- a/configs/ls1021aqds_nor_SECURE_BOOT_defconfig
+++ b/configs/ls1021aqds_nor_SECURE_BOOT_defconfig
@@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1021AQDS=y
 CONFIG_SYS_TEXT_BASE=0x60100000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_AHCI=y
 # CONFIG_SYS_MALLOC_F is not set
diff --git a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
index 8871c61..0770836 100644
--- a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
+++ b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
@@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1021ATWR=y
 CONFIG_SYS_TEXT_BASE=0x60100000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_AHCI=y
 CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
index 8277d6a..906f0b6 100644
--- a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
+++ b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
@@ -3,7 +3,7 @@
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
diff --git a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig
index 3170d81..267fc0d 100644
--- a/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1028aqds_tfa_SECURE_BOOT_defconfig
@@ -2,7 +2,7 @@
 CONFIG_TARGET_LS1028AQDS=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_MALLOC_F_LEN=0x6000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_SYS_FSL_SDHC_CLK_DIV=1
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
diff --git a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig
index c1e88b5..e3d547c 100644
--- a/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1028ardb_tfa_SECURE_BOOT_defconfig
@@ -2,7 +2,7 @@
 CONFIG_TARGET_LS1028ARDB=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_MALLOC_F_LEN=0x6000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_SYS_FSL_SDHC_CLK_DIV=1
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
diff --git a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig
index 472786a..9883d16 100644
--- a/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1043aqds_tfa_SECURE_BOOT_defconfig
@@ -2,7 +2,7 @@
 CONFIG_TARGET_LS1043AQDS=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
diff --git a/configs/ls1043ardb_SECURE_BOOT_defconfig b/configs/ls1043ardb_SECURE_BOOT_defconfig
index 57791a7..0d9d2dd 100644
--- a/configs/ls1043ardb_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_SECURE_BOOT_defconfig
@@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1043ARDB=y
 CONFIG_SYS_TEXT_BASE=0x60100000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_DISTRO_DEFAULTS=y
diff --git a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
index c45fc68..65c8435 100644
--- a/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_nand_SECURE_BOOT_defconfig
@@ -3,7 +3,7 @@
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
diff --git a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
index bdfa13a..1626004 100644
--- a/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_sdcard_SECURE_BOOT_defconfig
@@ -3,7 +3,7 @@
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
diff --git a/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig
index 5c8257d..187d493 100644
--- a/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1043ardb_tfa_SECURE_BOOT_defconfig
@@ -2,7 +2,7 @@
 CONFIG_TARGET_LS1043ARDB=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
diff --git a/configs/ls1046aqds_SECURE_BOOT_defconfig b/configs/ls1046aqds_SECURE_BOOT_defconfig
index e863c97..f4a9516 100644
--- a/configs/ls1046aqds_SECURE_BOOT_defconfig
+++ b/configs/ls1046aqds_SECURE_BOOT_defconfig
@@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1046AQDS=y
 CONFIG_SYS_TEXT_BASE=0x60100000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_AHCI=y
diff --git a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
index 2b4f72f..8a7b34b 100644
--- a/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1046aqds_tfa_SECURE_BOOT_defconfig
@@ -2,7 +2,7 @@
 CONFIG_TARGET_LS1046AQDS=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
diff --git a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
index dd78445..77d99f5 100644
--- a/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_qspi_SECURE_BOOT_defconfig
@@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1046ARDB=y
 CONFIG_SYS_TEXT_BASE=0x40100000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_NR_DRAM_BANKS=2
diff --git a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
index fcc3632..37ebaad 100644
--- a/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig
@@ -3,7 +3,7 @@
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
diff --git a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
index 9423d7d..fe2a073 100644
--- a/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1046ardb_tfa_SECURE_BOOT_defconfig
@@ -2,7 +2,7 @@
 CONFIG_TARGET_LS1046ARDB=y
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
diff --git a/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig b/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig
index bb90ed7..9c79daf 100644
--- a/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig
@@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1088AQDS=y
 CONFIG_SYS_TEXT_BASE=0x20100000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_NR_DRAM_BANKS=2
diff --git a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig
index 265303c..df560b0 100644
--- a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig
@@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS1088ARDB=y
 CONFIG_SYS_TEXT_BASE=0x20100000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_NR_DRAM_BANKS=2
diff --git a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
index 079ef9d..d243e77 100644
--- a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
@@ -3,7 +3,7 @@
 CONFIG_SYS_TEXT_BASE=0x80400000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
diff --git a/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig b/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig
index 45df134..203c795 100644
--- a/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls1088ardb_tfa_SECURE_BOOT_defconfig
@@ -3,7 +3,7 @@
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SYS_MALLOC_F_LEN=0x6000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
diff --git a/configs/ls2080aqds_SECURE_BOOT_defconfig b/configs/ls2080aqds_SECURE_BOOT_defconfig
index c0fde24..0ef829b 100644
--- a/configs/ls2080aqds_SECURE_BOOT_defconfig
+++ b/configs/ls2080aqds_SECURE_BOOT_defconfig
@@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS2080AQDS=y
 CONFIG_SYS_TEXT_BASE=0x30100000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_NR_DRAM_BANKS=3
 CONFIG_AHCI=y
diff --git a/configs/ls2080ardb_SECURE_BOOT_defconfig b/configs/ls2080ardb_SECURE_BOOT_defconfig
index 5f307f6..02173a7 100644
--- a/configs/ls2080ardb_SECURE_BOOT_defconfig
+++ b/configs/ls2080ardb_SECURE_BOOT_defconfig
@@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS2080ARDB=y
 CONFIG_SYS_TEXT_BASE=0x30100000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_NR_DRAM_BANKS=3
 CONFIG_AHCI=y
diff --git a/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig b/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig
index d4b5d87..091fe61 100644
--- a/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls2088ardb_qspi_SECURE_BOOT_defconfig
@@ -1,7 +1,7 @@
 CONFIG_ARM=y
 CONFIG_TARGET_LS2080ARDB=y
 CONFIG_SYS_TEXT_BASE=0x20100000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_FSL_LS_PPA=y
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_NR_DRAM_BANKS=3
diff --git a/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig b/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig
index 0f84055..b0e37bf 100644
--- a/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/ls2088ardb_tfa_SECURE_BOOT_defconfig
@@ -3,7 +3,7 @@
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SYS_MALLOC_F_LEN=0x6000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_QSPI_AHB_INIT=y
 CONFIG_NR_DRAM_BANKS=3
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
diff --git a/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
index 3d4506b..ad5f30a 100644
--- a/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
+++ b/configs/lx2160aqds_tfa_SECURE_BOOT_defconfig
@@ -3,7 +3,7 @@
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SYS_MALLOC_F_LEN=0x6000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_NR_DRAM_BANKS=3
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
diff --git a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
index ede4e0f..ab6dcce 100644
--- a/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
+++ b/configs/lx2160ardb_tfa_SECURE_BOOT_defconfig
@@ -3,7 +3,7 @@
 CONFIG_TFABOOT=y
 CONFIG_SYS_TEXT_BASE=0x82000000
 CONFIG_SYS_MALLOC_F_LEN=0x6000
-CONFIG_SECURE_BOOT=y
+CONFIG_NXP_ESBC=y
 CONFIG_EMC2305=y
 CONFIG_NR_DRAM_BANKS=3
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 31abee8..1363d30 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -66,13 +66,13 @@
 	board/freescale/ls1021atwr/ls102xa_rcw_sd_ifc.cfg
 #endif
 
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 /*
  * HDR would be appended at end of image and copied to DDR along
  * with U-Boot image.
  */
 #define CONFIG_U_BOOT_HDR_SIZE				(16 << 10)
-#endif /* ifdef CONFIG_SECURE_BOOT */
+#endif /* ifdef CONFIG_NXP_ESBC */
 
 #define CONFIG_SPL_MAX_SIZE		0x1a000
 #define CONFIG_SPL_STACK		0x1001d000
diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h
index 40fcd22..39f9318 100644
--- a/include/configs/ls1028a_common.h
+++ b/include/configs/ls1028a_common.h
@@ -192,7 +192,7 @@
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
 
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 #include <asm/fsl_secure_boot.h>
 #endif
 
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index 70447a2..e237012 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -74,7 +74,7 @@
 #define CONFIG_SPL_BSS_START_ADDR	0x8f000000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
 
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 #define CONFIG_U_BOOT_HDR_SIZE				(16 << 10)
 /*
  * HDR would be appended at end of image and copied to DDR along
@@ -85,7 +85,7 @@
 #define CONFIG_SYS_MONITOR_LEN		(0x100000 + CONFIG_U_BOOT_HDR_SIZE)
 #else
 #define CONFIG_SYS_MONITOR_LEN		0x100000
-#endif /* ifdef CONFIG_SECURE_BOOT */
+#endif /* ifdef CONFIG_NXP_ESBC */
 #endif
 
 /* NAND SPL */
@@ -100,9 +100,9 @@
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
 
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 #define CONFIG_U_BOOT_HDR_SIZE				(16 << 10)
-#endif /* ifdef CONFIG_SECURE_BOOT */
+#endif /* ifdef CONFIG_NXP_ESBC */
 
 #ifdef CONFIG_U_BOOT_HDR_SIZE
 /*
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index 59c43f1..cc8f4c0 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -73,7 +73,7 @@
 					CONFIG_SPL_BSS_MAX_SIZE)
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
 
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 #define CONFIG_U_BOOT_HDR_SIZE				(16 << 10)
 /*
  * HDR would be appended at end of image and copied to DDR along
@@ -84,7 +84,7 @@
 #define CONFIG_SYS_MONITOR_LEN		(0x100000 + CONFIG_U_BOOT_HDR_SIZE)
 #else
 #define CONFIG_SYS_MONITOR_LEN		0x100000
-#endif /* ifdef CONFIG_SECURE_BOOT */
+#endif /* ifdef CONFIG_NXP_ESBC */
 #endif
 
 #if defined(CONFIG_QSPI_BOOT) && defined(CONFIG_SPL)
diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
index 6f04dba..73c5629 100644
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@@ -235,7 +235,7 @@
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x00100000
 #define CONFIG_SYS_SPL_MALLOC_START    0x80200000
 
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 #define CONFIG_U_BOOT_HDR_SIZE		(16 << 10)
 /*
  * HDR would be appended at end of image and copied to DDR along
@@ -246,7 +246,7 @@
 #define CONFIG_SYS_MONITOR_LEN         (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
 #else
 #define CONFIG_SYS_MONITOR_LEN         0x100000
-#endif /* ifdef CONFIG_SECURE_BOOT */
+#endif /* ifdef CONFIG_NXP_ESBC */
 
 #endif
 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h
index 85e20617..c9c517f 100644
--- a/include/configs/ls1088aqds.h
+++ b/include/configs/ls1088aqds.h
@@ -407,7 +407,7 @@
 	QIXIS_SDID_MASK) != QIXIS_ESDHC_NO_ADAPTER)
 
 /* Initial environment variables */
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 #undef CONFIG_EXTRA_ENV_SETTINGS
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
@@ -426,7 +426,7 @@
 	"sf read 0xa0740000 0x740000 0x4000;esbc_validate 0xa0740000;"	\
 	"fsl_mc start mc 0xa0a00000 0xa0e00000\0"			\
 	"mcmemsize=0x70000000 \0"
-#else /* if !(CONFIG_SECURE_BOOT) */
+#else /* if !(CONFIG_NXP_ESBC) */
 #ifdef CONFIG_TFABOOT
 #define QSPI_MC_INIT_CMD				\
 	"sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"	\
@@ -522,7 +522,7 @@
 	"mcmemsize=0x70000000 \0"
 #endif
 #endif /* CONFIG_TFABOOT */
-#endif /* CONFIG_SECURE_BOOT */
+#endif /* CONFIG_NXP_ESBC */
 
 #ifdef CONFIG_FSL_MC_ENET
 #define CONFIG_FSL_MEMAC
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index e2a8975..08696fa 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -352,7 +352,7 @@
 
 /* Initial environment variables */
 #undef CONFIG_EXTRA_ENV_SETTINGS
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
 	"loadaddr=0x80100000\0"			\
@@ -442,7 +442,7 @@
 	"mcinitcmd=fsl_mc start mc 0x580a00000" \
 	" 0x580e00000 \0"
 #endif /* CONFIG_TFABOOT */
-#endif /* CONFIG_SECURE_BOOT */
+#endif /* CONFIG_NXP_ESBC */
 
 #ifdef CONFIG_TFABOOT
 #define SD_BOOTCOMMAND						\