global: Use proper project name U-Boot (next)

Use proper project name in DTs, messages and READMEs.

Signed-off-by: Michal Simek <michal.simek@amd.com>
diff --git a/board/armadeus/opos6uldev/opos6uldev.env b/board/armadeus/opos6uldev/opos6uldev.env
index 585f28c..f900297 100644
--- a/board/armadeus/opos6uldev/opos6uldev.env
+++ b/board/armadeus/opos6uldev/opos6uldev.env
@@ -42,8 +42,8 @@
 		setexpr sz ${filesize} / 0x200;
 		setexpr sz ${sz} + 1;
 		if mmc write ${loadaddr} 0x2 ${sz}; then
-			echo Flashing of U-boot SPL succeed;
-		else echo Flashing of U-boot SPL failed;
+			echo Flashing of U-Boot SPL succeed;
+		else echo Flashing of U-Boot SPL failed;
 		fi;
 	fi;
 download_uboot_img=tftpboot ${loadaddr} ${board_name}-u-boot.img
@@ -52,8 +52,8 @@
 		setexpr sz ${filesize} / 0x200;
 		setexpr sz ${sz} + 1;
 		if mmc write ${loadaddr} 0x8a ${sz}; then
-			echo Flashing of U-boot image succeed;
-		else echo Flashing of U-boot image failed;
+			echo Flashing of U-Boot image succeed;
+		else echo Flashing of U-Boot image failed;
 		fi;
 	fi;
 update_uboot=run download_uboot_spl flash_uboot_spl
diff --git a/board/freescale/common/fsl_chain_of_trust.c b/board/freescale/common/fsl_chain_of_trust.c
index b47ce05..87ed814 100644
--- a/board/freescale/common/fsl_chain_of_trust.c
+++ b/board/freescale/common/fsl_chain_of_trust.c
@@ -127,7 +127,7 @@
 				   &img_addr);
 
 	if (res == 0)
-		printf("SPL: Validation of U-boot successful\n");
+		printf("SPL: Validation of U-Boot successful\n");
 }
 
 #ifdef CONFIG_SPL_FRAMEWORK
diff --git a/board/freescale/ls1012afrdm/README b/board/freescale/ls1012afrdm/README
index 382b668..e60ed60 100644
--- a/board/freescale/ls1012afrdm/README
+++ b/board/freescale/ls1012afrdm/README
@@ -52,7 +52,7 @@
 Images		| Size	|QSPI Flash Address
 ------------------------------------------
 RCW + PBI	| 1MB	| 0x4000_0000
-U-boot		| 1MB	| 0x4010_0000
-U-boot Env	| 1MB	| 0x4020_0000
+U-Boot		| 1MB	| 0x4010_0000
+U-Boot Env	| 1MB	| 0x4020_0000
 PPA FIT image	| 2MB	| 0x4050_0000
 Linux ITB	| ~53MB | 0x40A0_0000
diff --git a/board/freescale/ls1012aqds/README b/board/freescale/ls1012aqds/README
index c1956f9..e9b80ca 100644
--- a/board/freescale/ls1012aqds/README
+++ b/board/freescale/ls1012aqds/README
@@ -53,7 +53,7 @@
 Images		| Size	|QSPI Flash Address
 ------------------------------------------
 RCW + PBI	| 1MB	| 0x4000_0000
-U-boot		| 1MB	| 0x4010_0000
-U-boot Env	| 1MB	| 0x4020_0000
+U-Boot		| 1MB	| 0x4010_0000
+U-Boot Env	| 1MB	| 0x4020_0000
 PPA FIT image	| 2MB	| 0x4050_0000
 Linux ITB	| ~53MB | 0x40A0_0000
diff --git a/board/freescale/ls1012ardb/README b/board/freescale/ls1012ardb/README
index 5b6f306..26b0485 100644
--- a/board/freescale/ls1012ardb/README
+++ b/board/freescale/ls1012ardb/README
@@ -48,8 +48,8 @@
 Images		| Size	|QSPI Flash Address
 ------------------------------------------
 RCW + PBI	| 1MB	| 0x4000_0000
-U-boot		| 1MB	| 0x4010_0000
-U-boot Env	| 1MB	| 0x4020_0000
+U-Boot		| 1MB	| 0x4010_0000
+U-Boot Env	| 1MB	| 0x4020_0000
 PPA FIT image	| 2MB	| 0x4050_0000
 Linux ITB	| ~53MB | 0x40A0_0000
 
@@ -90,8 +90,8 @@
 Images		| Size	|QSPI Flash Address
 ------------------------------------------
 RCW + PBI	| 1MB	| 0x4000_0000
-U-boot		| 1MB	| 0x4010_0000
-U-boot Env	| 1MB	| 0x4030_0000
+U-Boot		| 1MB	| 0x4010_0000
+U-Boot Env	| 1MB	| 0x4030_0000
 PPA FIT image	| 2MB	| 0x4040_0000
 PFE firmware	| 20K	| 0x00a0_0000
 Linux ITB	| ~53MB | 0x4100_0000
diff --git a/board/imgtec/boston/checkboard.c b/board/imgtec/boston/checkboard.c
index 1b8a47d..c246a7b 100644
--- a/board/imgtec/boston/checkboard.c
+++ b/board/imgtec/boston/checkboard.c
@@ -16,7 +16,7 @@
 {
 	u32 changelist;
 
-	lowlevel_display("U-boot  ");
+	lowlevel_display("U-Boot  ");
 
 	printf("Board: MIPS Boston\n");