trivial: Fix booot occurences
s/booot/boot/g
The first ase is booot instead of boot and second u-booot instead of
u-boot.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
diff --git a/board/freescale/p1010rdb/README.P1010RDB-PA b/board/freescale/p1010rdb/README.P1010RDB-PA
index 46c6123..0cb950d 100644
--- a/board/freescale/p1010rdb/README.P1010RDB-PA
+++ b/board/freescale/p1010rdb/README.P1010RDB-PA
@@ -88,7 +88,7 @@
Setting of hwconfig
===================
If FlexCAN or TDM is needed, please set "fsl_p1010mux:tdm_can=can" or
-"fsl_p1010mux:tdm_can=tdm" explicitly in u-booot prompt as below for example:
+"fsl_p1010mux:tdm_can=tdm" explicitly in u-boot prompt as below for example:
setenv hwconfig "fsl_p1010mux:tdm_can=tdm;usb1:dr_mode=host,phy_type=utmi"
By default, don't set fsl_p1010mux:tdm_can, in this case, spi chip selection
is set to spi-flash instead of to SLIC/TDM/DAC and tdm_can_sel is set to TDM
diff --git a/cmd/mmc.c b/cmd/mmc.c
index 97e5d91..1c252e0 100644
--- a/cmd/mmc.c
+++ b/cmd/mmc.c
@@ -1004,7 +1004,7 @@
"mmc part - lists available partition on current mmc device\n"
"mmc dev [dev] [part] - show or set current mmc device [partition]\n"
"mmc list - lists available devices\n"
- "mmc wp - power on write protect booot partitions\n"
+ "mmc wp - power on write protect boot partitions\n"
#if CONFIG_IS_ENABLED(MMC_HW_PARTITIONING)
"mmc hwpartition [args...] - does hardware partitioning\n"
" arguments (sizes in 512-byte blocks):\n"