ARM: dts: at91: sama5d2: fix dtc warning for ohci and ehci
Fixed the following DTC build warning (reproducible with W=1)
arch/arm/dts/at91-sama5d2_icp.dtb: Warning (unit_address_format): /ahb/ohci@00400000: unit name should not have leading 0s
arch/arm/dts/at91-sama5d2_icp.dtb: Warning (unit_address_format): /ahb/ehci@00500000: unit name should not have leading 0s
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Alexander Dahl <ada@thorsis.com>
diff --git a/arch/arm/dts/at91-sama5d27_som1_ek.dts b/arch/arm/dts/at91-sama5d27_som1_ek.dts
index ee851a1..efd1a5d 100644
--- a/arch/arm/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/dts/at91-sama5d27_som1_ek.dts
@@ -68,7 +68,7 @@
};
ahb {
- usb1: ohci@00400000 {
+ usb1: ohci@400000 {
num-ports = <3>;
atmel,vbus-gpio = <&pioA 42 0>;
pinctrl-names = "default";
@@ -76,7 +76,7 @@
status = "okay";
};
- usb2: ehci@00500000 {
+ usb2: ehci@500000 {
status = "okay";
};
diff --git a/arch/arm/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/dts/at91-sama5d2_ptc_ek.dts
index cd3711a..f45fb1e 100644
--- a/arch/arm/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/dts/at91-sama5d2_ptc_ek.dts
@@ -76,7 +76,7 @@
status = "okay";
};
- usb1: ohci@00400000 {
+ usb1: ohci@400000 {
num-ports = <3>;
atmel,vbus-gpio = <0
&pioA PIN_PB12 GPIO_ACTIVE_HIGH
@@ -87,7 +87,7 @@
status = "okay";
};
- usb2: ehci@00500000 {
+ usb2: ehci@500000 {
status = "okay";
};
diff --git a/arch/arm/dts/at91-sama5d2_xplained.dts b/arch/arm/dts/at91-sama5d2_xplained.dts
index 3e3cb40..34b64a2 100644
--- a/arch/arm/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/dts/at91-sama5d2_xplained.dts
@@ -29,7 +29,7 @@
};
ahb {
- usb1: ohci@00400000 {
+ usb1: ohci@400000 {
num-ports = <3>;
atmel,vbus-gpio = <&pioA 42 0>;
pinctrl-names = "default";
@@ -37,7 +37,7 @@
status = "okay";
};
- usb2: ehci@00500000 {
+ usb2: ehci@500000 {
status = "okay";
};
diff --git a/arch/arm/dts/sama5d2.dtsi b/arch/arm/dts/sama5d2.dtsi
index 6fb2cb2..d8a125b 100644
--- a/arch/arm/dts/sama5d2.dtsi
+++ b/arch/arm/dts/sama5d2.dtsi
@@ -32,7 +32,7 @@
#size-cells = <1>;
u-boot,dm-pre-reloc;
- usb1: ohci@00400000 {
+ usb1: ohci@400000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00400000 0x100000>;
clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
@@ -40,7 +40,7 @@
status = "disabled";
};
- usb2: ehci@00500000 {
+ usb2: ehci@500000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00500000 0x100000>;
clocks = <&utmi>, <&uhphs_clk>;