dm: usb: initialize and scan multiple buses simultaneously with uthread
Use the uthread framework to initialize and scan USB buses in parallel
for better performance. The console output is slightly modified with a
final per-bus report of the number of devices found, common to UTHREAD
and !UTHREAD. The USB tests are updated accordingly.
Tested on two platforms:
1. arm64 QEMU on a somewhat contrived example (4 USB buses, each with
one audio device, one keyboard, one mouse and one tablet)
$ make qemu_arm64_defconfig
$ make -j$(nproc) CROSS_COMPILE="ccache aarch64-linux-gnu-"
$ qemu-system-aarch64 -M virt -nographic -cpu max -bios u-boot.bin \
$(for i in {1..4}; do echo -device qemu-xhci,id=xhci$i \
-device\ usb-{audio,kbd,mouse,tablet},bus=xhci$i.0; \
done)
2. i.MX93 EVK (imx93_11x11_evk_defconfig) with two USB hubs, each with
one webcam and one ethernet adapter, resulting in the following device
tree:
USB device tree:
1 Hub (480 Mb/s, 0mA)
| u-boot EHCI Host Controller
|
+-2 Hub (480 Mb/s, 100mA)
| GenesysLogic USB2.1 Hub
|
+-3 Vendor specific (480 Mb/s, 350mA)
| Realtek USB 10/100/1000 LAN 001000001
|
+-4 (480 Mb/s, 500mA)
HD Pro Webcam C920 8F7CD51F
1 Hub (480 Mb/s, 0mA)
| u-boot EHCI Host Controller
|
+-2 Hub (480 Mb/s, 100mA)
| USB 2.0 Hub
|
+-3 Vendor specific (480 Mb/s, 200mA)
| Realtek USB 10/100/1000 LAN 000001
|
+-4 (480 Mb/s, 500mA)
Generic OnLan-CS30 201801010008
Note that i.MX was tested on top of the downstream repository [1] since
USB doesn't work in the upstream master branch.
[1] https://github.com/nxp-imx/uboot-imx/tree/lf-6.6.52-2.2.0
commit 6c4545203d12 ("LF-13928 update key for capsule")
The time spent in usb_init() ("usb start" command) is reported on
the console. Here are the results:
| CONFIG_UTHREAD=n | CONFIG_UTHREAD=y
--------+------------------+-----------------
QEMU | 5628 ms | 2212 ms
i.MX93 | 4591 ms | 2441 ms
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
diff --git a/test/boot/bootflow.c b/test/boot/bootflow.c
index 5f9c037..b261bd5 100644
--- a/test/boot/bootflow.c
+++ b/test/boot/bootflow.c
@@ -1290,7 +1290,7 @@
ut_assertok(run_command("bootflow scan", 0));
ut_assert_skip_to_line(
- "Bus usb@1: scanning bus usb@1 for devices... 5 USB Device(s) found");
+ "Bus usb@1: 5 USB Device(s) found");
ut_assertok(run_command("bootflow list", 0));