Add I2C and RTC support for RMU board using software I2C driver
(because of better response to iprobe command); fix problem with
"reset" command
diff --git a/CHANGELOG b/CHANGELOG
index 3bb17eb..f49ddb9 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,10 @@
Changes for U-Boot 0.4.7:
======================================================================
+* Add I2C and RTC support for RMU board using software I2C driver
+ (because of better response to iprobe command); fix problem with
+ "reset" command
+
* Patch by Matthias Fuchs, 28 Aug 2003:
Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
CONFIG_BOOTP_MAKS (see README).
diff --git a/include/configs/rmu.h b/include/configs/rmu.h
index 7b33c7e..c0c4083 100644
--- a/include/configs/rmu.h
+++ b/include/configs/rmu.h
@@ -61,8 +61,39 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
+/* enable I2C and select the hardware/software driver */
+#undef CONFIG_HARD_I2C /* I2C with hardware support */
+#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
+
+#define CFG_I2C_SPEED 40000 /* 40 kHz is supposed to work */
+#define CFG_I2C_SLAVE 0xFE
+
+/* Software (bit-bang) I2C driver configuration */
+#define PB_SCL 0x00000020 /* PB 26 */
+#define PB_SDA 0x00000010 /* PB 27 */
+
+#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL)
+#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA)
+#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA)
+#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
+#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \
+ else immr->im_cpm.cp_pbdat &= ~PB_SDA
+#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
+ else immr->im_cpm.cp_pbdat &= ~PB_SCL
+#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
+
+/* M41T11 Serial Access Timekeeper(R) SRAM */
+#define CONFIG_RTC_M41T11 1
+#define CFG_I2C_RTC_ADDR 0x68
+#define CFG_M41T11_BASE_YEAR 1900 /* play along with the linux driver */
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
+#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_I2C )
+
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
@@ -153,6 +184,11 @@
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
/*-----------------------------------------------------------------------
+ * Reset address
+ */
+#define CFG_RESET_ADDRESS ((ulong)((((immap_t *)CFG_IMMR)->im_clkrst.res)))
+
+/*-----------------------------------------------------------------------
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
diff --git a/include/watchdog.h b/include/watchdog.h
index b9ae916..7180259 100644
--- a/include/watchdog.h
+++ b/include/watchdog.h
@@ -85,16 +85,4 @@
void reset_4xx_watchdog(void);
#endif
-/* MPC 8260 */
-#if defined(CONFIG_MPC8260) && !defined(__ASSEMBLY__)
-#if defined(CONFIG_WATCHDOG)
-extern __inline__ void
-reset_8260_watchdog(volatile immap_t *immr)
-{
- immr->im_siu_conf.sc_swsr = 0x556c;
- immr->im_siu_conf.sc_swsr = 0xaa39;
-}
-#endif /* !__ASSEMBLY__ && CONFIG_WATCHDOG */
-#endif /* CONFIG_MPC8260 && !__ASSEMBLY__ */
-
#endif /* _WATCHDOG_H_ */