x86: acpi: Add wake up assembly stub
This adds a wake up stub before jumping to OS wake up vector.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Stefan Roese <sr@denx.de>
diff --git a/arch/x86/cpu/Makefile b/arch/x86/cpu/Makefile
index 92a9023..e1c84ce 100644
--- a/arch/x86/cpu/Makefile
+++ b/arch/x86/cpu/Makefile
@@ -45,6 +45,7 @@
obj-$(CONFIG_SMP) += sipi_vector.o
endif
obj-y += turbo.o
+obj-$(CONFIG_HAVE_ACPI_RESUME) += wakeup.o
ifeq ($(CONFIG_$(SPL_)X86_64),y)
obj-y += x86_64/
diff --git a/arch/x86/cpu/wakeup.S b/arch/x86/cpu/wakeup.S
new file mode 100644
index 0000000..066c9b1
--- /dev/null
+++ b/arch/x86/cpu/wakeup.S
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2017, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * From coreboot src/arch/x86/wakeup.S
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm/acpi_s3.h>
+#include <asm/processor.h>
+#include <asm/processor-flags.h>
+
+#define RELOCATED(x) ((x) - __wakeup + WAKEUP_BASE)
+
+#define CODE_SEG (X86_GDT_ENTRY_16BIT_CS * X86_GDT_ENTRY_SIZE)
+#define DATA_SEG (X86_GDT_ENTRY_16BIT_DS * X86_GDT_ENTRY_SIZE)
+
+ .code32
+ .globl __wakeup
+__wakeup:
+ /* First prepare the jmp to the resume vector */
+ mov 0x4(%esp), %eax /* vector */
+ /* last 4 bits of linear addr are taken as offset */
+ andw $0x0f, %ax
+ movw %ax, (__wakeup_offset)
+ mov 0x4(%esp), %eax
+ /* the rest is taken as segment */
+ shr $4, %eax
+ movw %ax, (__wakeup_segment)
+
+ /* Activate the right segment descriptor real mode */
+ ljmp $CODE_SEG, $RELOCATED(1f)
+1:
+ /* 16 bit code from here on... */
+ .code16
+
+ /*
+ * Load the segment registers w/ properly configured segment
+ * descriptors. They will retain these configurations (limits,
+ * writability, etc.) once protected mode is turned off.
+ */
+ mov $DATA_SEG, %ax
+ mov %ax, %ds
+ mov %ax, %es
+ mov %ax, %fs
+ mov %ax, %gs
+ mov %ax, %ss
+
+ /* Turn off protection */
+ movl %cr0, %eax
+ andl $~X86_CR0_PE, %eax
+ movl %eax, %cr0
+
+ /* Now really going into real mode */
+ ljmp $0, $RELOCATED(1f)
+1:
+ movw $0x0, %ax
+ movw %ax, %ds
+ movw %ax, %es
+ movw %ax, %ss
+ movw %ax, %fs
+ movw %ax, %gs
+
+ /*
+ * This is a FAR JMP to the OS waking vector.
+ * The C code changes the address to be correct.
+ */
+ .byte 0xea
+
+__wakeup_offset = RELOCATED(.)
+ .word 0x0000
+
+__wakeup_segment = RELOCATED(.)
+ .word 0x0000
+
+ .globl __wakeup_size
+__wakeup_size:
+ .long . - __wakeup
diff --git a/arch/x86/include/asm/acpi_s3.h b/arch/x86/include/asm/acpi_s3.h
index 10cedde..a06466c 100644
--- a/arch/x86/include/asm/acpi_s3.h
+++ b/arch/x86/include/asm/acpi_s3.h
@@ -7,6 +7,8 @@
#ifndef __ASM_ACPI_S3_H__
#define __ASM_ACPI_S3_H__
+#define WAKEUP_BASE 0x600
+
/* PM1_STATUS register */
#define WAK_STS (1 << 15)
#define PCIEXPWAK_STS (1 << 14)
@@ -27,6 +29,11 @@
#define SLP_TYP_S4 6
#define SLP_TYP_S5 7
+#ifndef __ASSEMBLY__
+
+extern char __wakeup[];
+extern int __wakeup_size;
+
enum acpi_sleep_state {
ACPI_S0,
ACPI_S1,
@@ -92,4 +99,6 @@
*/
void chipset_clear_sleep_state(void);
+#endif /* __ASSEMBLY__ */
+
#endif /* __ASM_ACPI_S3_H__ */