diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
index b0c267c..98b268d 100644
--- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
+++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
@@ -98,6 +98,7 @@
 #define SCFG_ETSECDMAMCR_LE_BD_FR	0xf8001a0f
 #define SCFG_ETSECCMCR_GE2_CLK125	0x04000000
 #define SCFG_PIXCLKCR_PXCKEN		0x80000000
+#define SCFG_QSPI_CLKSEL		0xc0100000
 
 /* Supplemental Configuration Unit */
 struct ccsr_scfg {
diff --git a/board/freescale/ls1021aqds/MAINTAINERS b/board/freescale/ls1021aqds/MAINTAINERS
index 962176b..7a704cf 100644
--- a/board/freescale/ls1021aqds/MAINTAINERS
+++ b/board/freescale/ls1021aqds/MAINTAINERS
@@ -7,3 +7,4 @@
 F:	configs/ls1021aqds_ddr4_nor_defconfig
 F:	configs/ls1021aqds_nor_SECURE_BOOT_defconfig
 F:	configs/ls1021aqds_sdcard_defconfig
+F:	configs/ls1021aqds_qspi_defconfig
diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c
index 9eab42d..9fcd129 100644
--- a/board/freescale/ls1021aqds/ls1021aqds.c
+++ b/board/freescale/ls1021aqds/ls1021aqds.c
@@ -34,7 +34,9 @@
 
 int checkboard(void)
 {
+#ifndef CONFIG_QSPI_BOOT
 	char buf[64];
+#endif
 #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_QSPI_BOOT)
 	u8 sw;
 #endif
@@ -61,12 +63,14 @@
 		printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
 #endif
 
+#ifndef CONFIG_QSPI_BOOT
 	printf("Sys ID:0x%02x, Sys Ver: 0x%02x\n",
 	       QIXIS_READ(id), QIXIS_READ(arch));
 
 	printf("FPGA:  v%d (%s), build %d\n",
 	       (int)QIXIS_READ(scver), qixis_read_tag(buf),
 	       (int)qixis_read_minor());
+#endif
 
 	return 0;
 }
@@ -164,6 +168,10 @@
 	init_early_memctl_regs();
 #endif
 
+#ifdef CONFIG_FSL_QSPI
+	out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
+#endif
+
 	/* Workaround for the issue that DDR could not respond to
 	 * barrier transaction which is generated by executing DSB/ISB
 	 * instruction. Set CCI-400 control override register to
diff --git a/board/freescale/ls1021atwr/MAINTAINERS b/board/freescale/ls1021atwr/MAINTAINERS
index 2312e00..9176706 100644
--- a/board/freescale/ls1021atwr/MAINTAINERS
+++ b/board/freescale/ls1021atwr/MAINTAINERS
@@ -6,3 +6,4 @@
 F:	configs/ls1021atwr_nor_defconfig
 F:	configs/ls1021atwr_nor_SECURE_BOOT_defconfig
 F:	configs/ls1021atwr_sdcard_defconfig
+F:	configs/ls1021atwr_qspi_defconfig
diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c
index 0faee0a..5c3a282 100644
--- a/board/freescale/ls1021atwr/ls1021atwr.c
+++ b/board/freescale/ls1021atwr/ls1021atwr.c
@@ -72,6 +72,7 @@
 	u8 rev2;		/* Reserved */
 };
 
+#ifndef CONFIG_QSPI_BOOT
 static void convert_serdes_mux(int type, int need_reset);
 
 void cpld_show(void)
@@ -107,11 +108,14 @@
 	       in_8(&cpld_data->serdes_mux));
 #endif
 }
+#endif
 
 int checkboard(void)
 {
 	puts("Board: LS1021ATWR\n");
+#ifndef CONFIG_QSPI_BOOT
 	cpld_show();
+#endif
 
 	return 0;
 }
@@ -220,6 +224,7 @@
 }
 #endif
 
+#ifndef CONFIG_QSPI_BOOT
 int config_serdes_mux(void)
 {
 	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
@@ -251,6 +256,7 @@
 
 	return 0;
 }
+#endif
 
 int board_early_init_f(void)
 {
@@ -269,6 +275,10 @@
 	out_be32(&scfg->pixclkcr, SCFG_PIXCLKCR_PXCKEN);
 #endif
 
+#ifdef CONFIG_FSL_QSPI
+	out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
+#endif
+
 	return 0;
 }
 
@@ -305,8 +315,10 @@
 
 #ifndef CONFIG_SYS_FSL_NO_SERDES
 	fsl_serdes_init();
+#ifndef CONFIG_QSPI_BOOT
 	config_serdes_mux();
 #endif
+#endif
 
 #ifdef CONFIG_U_QE
 	u_qe_init();
@@ -354,6 +366,7 @@
 	return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00);
 }
 
+#ifndef CONFIG_QSPI_BOOT
 static void convert_flash_bank(char bank)
 {
 	struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
@@ -536,3 +549,4 @@
 	"	-change lane C & lane D to PCIeX2\n"
 	"\nWARNING: If you aren't familiar with the setting of serdes, don't try to change anything!\n"
 );
+#endif
diff --git a/configs/ls1021aqds_qspi_defconfig b/configs/ls1021aqds_qspi_defconfig
new file mode 100644
index 0000000..05ec8e6
--- /dev/null
+++ b/configs/ls1021aqds_qspi_defconfig
@@ -0,0 +1,3 @@
+CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
++S:CONFIG_ARM=y
++S:CONFIG_TARGET_LS1021AQDS=y
diff --git a/configs/ls1021atwr_qspi_defconfig b/configs/ls1021atwr_qspi_defconfig
new file mode 100644
index 0000000..611f6e8
--- /dev/null
+++ b/configs/ls1021atwr_qspi_defconfig
@@ -0,0 +1,3 @@
+CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
++S:CONFIG_ARM=y
++S:CONFIG_TARGET_LS1021ATWR=y
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 4496871..6f8b43f 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -37,8 +37,14 @@
 unsigned long get_board_ddr_clk(void);
 #endif
 
+#ifdef CONFIG_QSPI_BOOT
+#define CONFIG_SYS_CLK_FREQ		100000000
+#define CONFIG_DDR_CLK_FREQ		100000000
+#define CONFIG_QIXIS_I2C_ACCESS
+#else
 #define CONFIG_SYS_CLK_FREQ		get_board_sys_clk()
 #define CONFIG_DDR_CLK_FREQ		get_board_ddr_clk()
+#endif
 
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_SYS_FSL_PBL_PBI	board/freescale/ls1021aqds/ls102xa_pbi.cfg
@@ -73,6 +79,11 @@
 #define CONFIG_SYS_MONITOR_LEN		0x80000
 #endif
 
+#ifdef CONFIG_QSPI_BOOT
+#define CONFIG_SYS_TEXT_BASE		0x40010000
+#define CONFIG_SYS_NO_FLASH
+#endif
+
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE		0x67f80000
 #endif
@@ -112,6 +123,7 @@
 /*
  * IFC Definitions
  */
+#ifndef CONFIG_QSPI_BOOT
 #define CONFIG_FSL_IFC
 #define CONFIG_SYS_FLASH_BASE		0x60000000
 #define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
@@ -204,6 +216,7 @@
 #define CONFIG_CMD_NAND
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
+#endif
 
 /*
  * QIXIS Definitions
@@ -316,6 +329,18 @@
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 
+/* QSPI */
+#ifdef CONFIG_QSPI_BOOT
+#define CONFIG_FSL_QSPI
+#define QSPI0_AMBA_BASE			0x40000000
+#define FSL_QSPI_FLASH_SIZE		(1 << 24)
+#define FSL_QSPI_FLASH_NUM		2
+
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_SPANSION
+#endif
+
 /*
  * USB
  */
@@ -394,7 +419,11 @@
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_CMDLINE_EDITING
 
+#ifdef CONFIG_QSPI_BOOT
+#undef CONFIG_CMD_IMLS
+#else
 #define CONFIG_CMD_IMLS
+#endif
 
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		128
@@ -458,6 +487,11 @@
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV		0
 #define CONFIG_ENV_SIZE			0x2000
+#elif defined(CONFIG_QSPI_BOOT)
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SIZE			0x2000          /* 8KB */
+#define CONFIG_ENV_OFFSET		0x100000        /* 1MB */
+#define CONFIG_ENV_SECT_SIZE		0x10000
 #else
 #define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 972becd..a3271fe 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -67,6 +67,11 @@
 #define CONFIG_SYS_MONITOR_LEN		0x80000
 #endif
 
+#ifdef CONFIG_QSPI_BOOT
+#define CONFIG_SYS_TEXT_BASE		0x40010000
+#define CONFIG_SYS_NO_FLASH
+#endif
+
 #ifndef CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE		0x67f80000
 #endif
@@ -90,6 +95,7 @@
 /*
  * IFC Definitions
  */
+#ifndef CONFIG_QSPI_BOOT
 #define CONFIG_FSL_IFC
 #define CONFIG_SYS_FLASH_BASE		0x60000000
 #define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
@@ -133,6 +139,7 @@
 
 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 #define CONFIG_SYS_WRITE_SWAPPED_DATA
+#endif
 
 /* CPLD */
 
@@ -216,6 +223,18 @@
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 
+/* QSPI */
+#ifdef CONFIG_QSPI_BOOT
+#define CONFIG_FSL_QSPI
+#define QSPI0_AMBA_BASE			0x40000000
+#define FSL_QSPI_FLASH_SIZE		(1 << 24)
+#define FSL_QSPI_FLASH_NUM		2
+
+#define CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+#endif
+
 /*
  * Video
  */
@@ -287,7 +306,11 @@
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_CMDLINE_EDITING
 
+#ifdef CONFIG_QSPI_BOOT
+#undef CONFIG_CMD_IMLS
+#else
 #define CONFIG_CMD_IMLS
+#endif
 
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		128
@@ -350,6 +373,11 @@
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV		0
 #define CONFIG_ENV_SIZE			0x20000
+#elif defined(CONFIG_QSPI_BOOT)
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SIZE			0x2000
+#define CONFIG_ENV_OFFSET		0x100000
+#define CONFIG_ENV_SECT_SIZE		0x10000
 #else
 #define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)