sunxi: H6: Enable USB for existing boards
So far USB was not enabled for the Allwinner H6 boards, as the PHY
driver was not ready and the clock gates were missing. Since this is now
fixed, let's add the PHY and the OHCI/EHCI drivers to the build, for
all existing H6 boards.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> # Pine-H64
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index d4e7d89..ffdf09f 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -300,6 +300,7 @@
select ARM64
select SUPPORT_SPL
select FIT
+ select PHY_SUN4I_USB
select SPL_LOAD_FIT
select DRAM_SUN50I_H6
diff --git a/configs/beelink_gs1_defconfig b/configs/beelink_gs1_defconfig
index eec4edd..f142cde 100644
--- a/configs/beelink_gs1_defconfig
+++ b/configs/beelink_gs1_defconfig
@@ -14,3 +14,5 @@
CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-beelink-gs1"
CONFIG_LED=y
CONFIG_LED_GPIO=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
diff --git a/configs/orangepi_lite2_defconfig b/configs/orangepi_lite2_defconfig
index 2d74fc4..74c11d8 100644
--- a/configs/orangepi_lite2_defconfig
+++ b/configs/orangepi_lite2_defconfig
@@ -11,3 +11,5 @@
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-orangepi-lite2"
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
diff --git a/configs/orangepi_one_plus_defconfig b/configs/orangepi_one_plus_defconfig
index 3737ecd..f86bb29 100644
--- a/configs/orangepi_one_plus_defconfig
+++ b/configs/orangepi_one_plus_defconfig
@@ -11,3 +11,5 @@
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-orangepi-one-plus"
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
diff --git a/configs/pine_h64_defconfig b/configs/pine_h64_defconfig
index a49bd66..dd1368a 100644
--- a/configs/pine_h64_defconfig
+++ b/configs/pine_h64_defconfig
@@ -12,3 +12,6 @@
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-pine-h64"
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB3_VBUS_PIN="PL5"