stv0991: configure clock & pad muxing for qspi
stv0991 has cadence qspi controller for flash interfacing, this
patch configures the device pads & clock for the controller.
Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
Reviewed-by: Jagannadh Teki <jteki@openedev.com>
diff --git a/arch/arm/cpu/armv7/stv0991/clock.c b/arch/arm/cpu/armv7/stv0991/clock.c
index 70b8a8d..26c0d36 100644
--- a/arch/arm/cpu/armv7/stv0991/clock.c
+++ b/arch/arm/cpu/armv7/stv0991/clock.c
@@ -33,7 +33,9 @@
/* Clock selection for ethernet tx_clk & rx_clk*/
writel((readl(&stv0991_cgu_regs->eth_ctrl) & ETH_CLK_MASK)
| ETH_CLK_CTRL, &stv0991_cgu_regs->eth_ctrl);
-
+ break;
+ case QSPI_CLOCK_CFG:
+ writel(QSPI_CLK_CTRL, &stv0991_cgu_regs->qspi_freq);
break;
default:
break;
diff --git a/arch/arm/cpu/armv7/stv0991/pinmux.c b/arch/arm/cpu/armv7/stv0991/pinmux.c
index 1d086a2..24c67fa 100644
--- a/arch/arm/cpu/armv7/stv0991/pinmux.c
+++ b/arch/arm/cpu/armv7/stv0991/pinmux.c
@@ -55,6 +55,11 @@
ETH_M_VDD_CFG, &stv0991_creg->vdd_pad1);
break;
+ case QSPI_CS_CLK_PAD:
+ writel((readl(&stv0991_creg->mux13) & FLASH_CS_NC_MASK) |
+ CFG_FLASH_CS_NC, &stv0991_creg->mux13);
+ writel((readl(&stv0991_creg->mux13) & FLASH_CLK_MASK) |
+ CFG_FLASH_CLK, &stv0991_creg->mux13);
default:
break;
}