include: Use CONFIG_XPL_BUILD instead of CONFIG_SPL_BUILD
Use the new symbol to refer to any 'SPL' build, including TPL and VPL
Signed-off-by: Simon Glass <sjg@chromium.org>
diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h
index 9efae58..20fded5 100644
--- a/include/configs/P1010RDB.h
+++ b/include/configs/P1010RDB.h
@@ -43,7 +43,7 @@
#define CFG_SYS_NAND_U_BOOT_SIZE (576 << 10)
#define CFG_SYS_NAND_U_BOOT_DST (0x11000000)
#define CFG_SYS_NAND_U_BOOT_START (0x11000000)
-#elif defined(CONFIG_SPL_BUILD)
+#elif defined(CONFIG_XPL_BUILD)
#define CFG_SYS_NAND_U_BOOT_SIZE (128 << 10)
#define CFG_SYS_NAND_U_BOOT_DST 0xD0000000
#define CFG_SYS_NAND_U_BOOT_START 0xD0000000
@@ -290,7 +290,7 @@
/*
* Config the L2 Cache as L2 SRAM
*/
-#if defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_XPL_BUILD)
#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
#define CFG_SYS_INIT_L2_ADDR 0xD0000000
#define CFG_SYS_INIT_L2_ADDR_PHYS CFG_SYS_INIT_L2_ADDR
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 67f4656..19d3c72 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -75,7 +75,7 @@
#include <config_distro_bootcmd.h>
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
#include <env/ti/dfu.h>
#define CFG_EXTRA_ENV_SETTINGS \
@@ -181,7 +181,7 @@
#endif /* !CONFIG_MTD_RAW_NAND */
/* USB Device Firmware Update support */
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
#define DFUARGS \
DFU_ALT_INFO_EMMC \
DFU_ALT_INFO_MMC \
diff --git a/include/configs/am335x_guardian.h b/include/configs/am335x_guardian.h
index a8fa61c..96efd38 100644
--- a/include/configs/am335x_guardian.h
+++ b/include/configs/am335x_guardian.h
@@ -16,7 +16,7 @@
#define V_OSCK 24000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK)
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
#define MEM_LAYOUT_ENV_SETTINGS \
"scriptaddr=0x80000000\0" \
@@ -70,7 +70,7 @@
"setenv boot_syslinux_conf \"extlinux/extlinux.conf\"; " \
"run bootcmd_ubifs0;\0"
-#endif /* ! CONFIG_SPL_BUILD */
+#endif /* ! CONFIG_XPL_BUILD */
#define SPLASH_SCREEN_NAND_PART "nand0,10"
#define SPLASH_SCREEN_BMP_FILE_SIZE 0x26000
diff --git a/include/configs/am335x_shc.h b/include/configs/am335x_shc.h
index dedef91..55d5190 100644
--- a/include/configs/am335x_shc.h
+++ b/include/configs/am335x_shc.h
@@ -20,7 +20,7 @@
#define V_OSCK 24000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK)
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
#define CFG_EXTRA_ENV_SETTINGS \
"loadaddr=0x80200000\0" \
"kloadaddr=0x84000000\0" \
@@ -117,7 +117,7 @@
"setenv mmcpart 5; " \
"fi; " \
"setenv mmcroot /dev/mmcblk${mmcdev}p${mmcpart};\0"
-#endif /* #ifndef CONFIG_SPL_BUILD */
+#endif /* #ifndef CONFIG_XPL_BUILD */
#if defined CONFIG_SHC_NETBOOT
/* Network Boot */
diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
index 87ffa76..036995c 100644
--- a/include/configs/am43xx_evm.h
+++ b/include/configs/am43xx_evm.h
@@ -35,7 +35,7 @@
/* NS16550 Configuration */
#define CFG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
/* USB Device Firmware Update support */
#define DFUARGS \
"dfu_bufsiz=0x10000\0" \
@@ -63,7 +63,7 @@
#include <config_distro_bootcmd.h>
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
#include <env/ti/dfu.h>
#define CFG_EXTRA_ENV_SETTINGS \
diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h
index 4b4362c..aa31f3b 100644
--- a/include/configs/am57xx_evm.h
+++ b/include/configs/am57xx_evm.h
@@ -18,7 +18,7 @@
#define CFG_SYS_NS16550_COM2 UART2_BASE /* UART2 */
#define CFG_SYS_NS16550_COM3 UART3_BASE /* UART3 */
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
#define DFUARGS \
"dfu_bufsiz=0x10000\0" \
DFU_ALT_INFO_MMC \
diff --git a/include/configs/capricorn-common.h b/include/configs/capricorn-common.h
index 9dcacad..1f61b2b 100644
--- a/include/configs/capricorn-common.h
+++ b/include/configs/capricorn-common.h
@@ -13,10 +13,10 @@
#include "siemens-env-common.h"
/* SPL config */
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
#define CFG_MALLOC_F_ADDR 0x00120000
-#endif /* CONFIG_SPL_BUILD */
+#endif /* CONFIG_XPL_BUILD */
/* ENET1 connects to base board and MUX with ESAI */
#define CFG_FEC_ENET_DEV 1
diff --git a/include/configs/cgtqmx8.h b/include/configs/cgtqmx8.h
index 98d4d8c..0d33838 100644
--- a/include/configs/cgtqmx8.h
+++ b/include/configs/cgtqmx8.h
@@ -11,7 +11,7 @@
#include <linux/sizes.h>
#include <asm/arch/imx-regs.h>
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
#define CFG_MALLOC_F_ADDR 0x00120000
#endif
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index 416aa96..8db849c 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -157,7 +157,7 @@
"console=ttyS2,115200n8\0" \
"hwconfig=dsp:wake=yes"
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
/* defines for SPL */
#endif
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 633ec1f..96dcd73 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -28,7 +28,7 @@
#define CFG_SYS_NS16550_COM2 UART2_BASE /* UART2 */
#define CFG_SYS_NS16550_COM3 UART3_BASE /* UART3 */
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
#define DFUARGS \
"dfu_bufsiz=0x10000\0" \
DFU_ALT_INFO_MMC \
@@ -37,7 +37,7 @@
DFU_ALT_INFO_QSPI
#endif
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
#ifdef CONFIG_SPL_DFU
#define DFUARGS \
"dfu_bufsiz=0x10000\0" \
diff --git a/include/configs/ds116.h b/include/configs/ds116.h
index c232659..2f2bc43 100644
--- a/include/configs/ds116.h
+++ b/include/configs/ds116.h
@@ -18,7 +18,7 @@
*/
#include "mv-common.h"
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
#define KERNEL_ADDR_R __stringify(0x1000000)
#define FDT_ADDR_R __stringify(0x2000000)
@@ -39,6 +39,6 @@
"fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
"console=ttyS0,115200\0"
-#endif /* CONFIG_SPL_BUILD */
+#endif /* CONFIG_XPL_BUILD */
#endif /* _CONFIG_DS116_H */
diff --git a/include/configs/ds414.h b/include/configs/ds414.h
index 9525657..431a78d 100644
--- a/include/configs/ds414.h
+++ b/include/configs/ds414.h
@@ -43,7 +43,7 @@
*/
#include "mv-common.h"
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
#define KERNEL_ADDR_R __stringify(0x1000000)
#define FDT_ADDR_R __stringify(0x2000000)
@@ -80,6 +80,6 @@
"fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
"console=ttyS0,115200\0"
-#endif /* CONFIG_SPL_BUILD */
+#endif /* CONFIG_XPL_BUILD */
#endif /* _CONFIG_SYNOLOGY_DS414_H */
diff --git a/include/configs/gardena-smart-gateway-mt7688.h b/include/configs/gardena-smart-gateway-mt7688.h
index 1b97ae2..a89d298 100644
--- a/include/configs/gardena-smart-gateway-mt7688.h
+++ b/include/configs/gardena-smart-gateway-mt7688.h
@@ -15,7 +15,7 @@
#define CFG_SYS_UBOOT_BASE 0
/* Serial SPL */
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_SERIAL)
+#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_SERIAL)
#define CFG_SYS_NS16550_CLK 40000000
#define CFG_SYS_NS16550_COM1 0xb0000c00
#endif
diff --git a/include/configs/imx6q-bosch-acc.h b/include/configs/imx6q-bosch-acc.h
index fab5063..64ddbf7 100644
--- a/include/configs/imx6q-bosch-acc.h
+++ b/include/configs/imx6q-bosch-acc.h
@@ -92,7 +92,7 @@
/* SPL */
#ifdef CONFIG_SPL
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
#define CFG_SYS_FSL_USDHC_NUM 2
#ifdef CONFIG_SYS_BOOT_EMMC
diff --git a/include/configs/imx6ulz_smm_m2.h b/include/configs/imx6ulz_smm_m2.h
index 9da98d0..44a3fc0 100644
--- a/include/configs/imx6ulz_smm_m2.h
+++ b/include/configs/imx6ulz_smm_m2.h
@@ -14,14 +14,14 @@
#define CFG_MXC_UART_BASE UART4_BASE
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
#define BOOT_TARGET_DEVICES(func) \
func(NAND, nand, 0) \
#include <config_distro_bootcmd.h>
-#endif /* !CONFIG_SPL_BUILD */
+#endif /* !CONFIG_XPL_BUILD */
#define MEM_LAYOUT_ENV_SETTINGS \
"scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
diff --git a/include/configs/imx8mm-cl-iot-gate.h b/include/configs/imx8mm-cl-iot-gate.h
index 146f794..6ed4a6f 100644
--- a/include/configs/imx8mm-cl-iot-gate.h
+++ b/include/configs/imx8mm-cl-iot-gate.h
@@ -14,7 +14,7 @@
#define CFG_SYS_UBOOT_BASE \
(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
#define CFG_MALLOC_F_ADDR 0x912000
/* For RAW image gives a error info not panic */
diff --git a/include/configs/imx8mm_beacon.h b/include/configs/imx8mm_beacon.h
index fa20651..2ec7f3d 100644
--- a/include/configs/imx8mm_beacon.h
+++ b/include/configs/imx8mm_beacon.h
@@ -21,7 +21,7 @@
(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
#endif
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
#define CFG_MALLOC_F_ADDR 0x930000
/* For RAW image gives a error info not panic */
diff --git a/include/configs/imx8mm_data_modul_edm_sbc.h b/include/configs/imx8mm_data_modul_edm_sbc.h
index 9a5e5bd..d323f84 100644
--- a/include/configs/imx8mm_data_modul_edm_sbc.h
+++ b/include/configs/imx8mm_data_modul_edm_sbc.h
@@ -10,7 +10,7 @@
#include <linux/stringify.h>
#include <asm/arch/imx-regs.h>
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
#define CFG_MALLOC_F_ADDR 0x930000
/* For RAW image gives a error info not panic */
diff --git a/include/configs/imx8mm_evk.h b/include/configs/imx8mm_evk.h
index 9dd63fc..3bbbd90 100644
--- a/include/configs/imx8mm_evk.h
+++ b/include/configs/imx8mm_evk.h
@@ -22,7 +22,7 @@
(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
#endif
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
#define CFG_MALLOC_F_ADDR 0x930000
/* For RAW image gives a error info not panic */
diff --git a/include/configs/imx8mm_icore_mx8mm.h b/include/configs/imx8mm_icore_mx8mm.h
index 2158b0a..145dab9 100644
--- a/include/configs/imx8mm_icore_mx8mm.h
+++ b/include/configs/imx8mm_icore_mx8mm.h
@@ -13,11 +13,11 @@
#define CFG_SYS_UBOOT_BASE \
(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
# define CFG_MALLOC_F_ADDR 0x930000
/* For RAW image gives a error info not panic */
-#endif /* CONFIG_SPL_BUILD */
+#endif /* CONFIG_XPL_BUILD */
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 2) \
diff --git a/include/configs/imx8mm_phg.h b/include/configs/imx8mm_phg.h
index d2d7ffa..038d3a7 100644
--- a/include/configs/imx8mm_phg.h
+++ b/include/configs/imx8mm_phg.h
@@ -14,7 +14,7 @@
#define CFG_SYS_UBOOT_BASE \
(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
#define CFG_MALLOC_F_ADDR 0x930000
#endif
diff --git a/include/configs/imx8mm_venice.h b/include/configs/imx8mm_venice.h
index 6681661..ed09dd0 100644
--- a/include/configs/imx8mm_venice.h
+++ b/include/configs/imx8mm_venice.h
@@ -12,7 +12,7 @@
#define CFG_SYS_UBOOT_BASE \
(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
#define CFG_MALLOC_F_ADDR 0x930000
#endif
diff --git a/include/configs/imx8mp_rsb3720.h b/include/configs/imx8mp_rsb3720.h
index b82e35f..8b96f7f 100644
--- a/include/configs/imx8mp_rsb3720.h
+++ b/include/configs/imx8mp_rsb3720.h
@@ -23,7 +23,7 @@
EFI_GUID(0xb5fb6f08, 0xe142, 0x4db1, 0x97, 0xea, \
0x5f, 0xd3, 0x6b, 0x9b, 0xe5, 0xb9)
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
#define CFG_MALLOC_F_ADDR 0x184000 /* malloc f used before \
* GD_FLG_FULL_MALLOC_INIT \
* set \
diff --git a/include/configs/imx8mq_cm.h b/include/configs/imx8mq_cm.h
index 2bbd6b1..ccbb0f8 100644
--- a/include/configs/imx8mq_cm.h
+++ b/include/configs/imx8mq_cm.h
@@ -10,7 +10,7 @@
#include <linux/stringify.h>
#include <asm/arch/imx-regs.h>
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
#define CFG_MALLOC_F_ADDR 0x182000
diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h
index 9eefc31..666f46a 100644
--- a/include/configs/imx8mq_evk.h
+++ b/include/configs/imx8mq_evk.h
@@ -10,7 +10,7 @@
#include <linux/stringify.h>
#include <asm/arch/imx-regs.h>
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
diff --git a/include/configs/imx8mq_phanbell.h b/include/configs/imx8mq_phanbell.h
index cd73a72..3bc4b00 100644
--- a/include/configs/imx8mq_phanbell.h
+++ b/include/configs/imx8mq_phanbell.h
@@ -9,7 +9,7 @@
#include <linux/sizes.h>
#include <asm/arch/imx-regs.h>
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
diff --git a/include/configs/imx8mq_reform2.h b/include/configs/imx8mq_reform2.h
index 7fa441a..40f96a5 100644
--- a/include/configs/imx8mq_reform2.h
+++ b/include/configs/imx8mq_reform2.h
@@ -10,7 +10,7 @@
#include <linux/stringify.h>
#include <asm/arch/imx-regs.h>
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h
index 4d5abe2..842184b 100644
--- a/include/configs/imx8qm_mek.h
+++ b/include/configs/imx8qm_mek.h
@@ -10,7 +10,7 @@
#include <linux/stringify.h>
#include <asm/arch/imx-regs.h>
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
#define CFG_MALLOC_F_ADDR 0x00120000
#endif
diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h
index 9399950..1b6eb2b 100644
--- a/include/configs/imx8qxp_mek.h
+++ b/include/configs/imx8qxp_mek.h
@@ -10,7 +10,7 @@
#include <linux/stringify.h>
#include <asm/arch/imx-regs.h>
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
#define CFG_MALLOC_F_ADDR 0x00120000
#endif
diff --git a/include/configs/imx8ulp_evk.h b/include/configs/imx8ulp_evk.h
index aa9da19..9308f52 100644
--- a/include/configs/imx8ulp_evk.h
+++ b/include/configs/imx8ulp_evk.h
@@ -11,7 +11,7 @@
#define CFG_SYS_UBOOT_BASE (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
#define CFG_MALLOC_F_ADDR 0x22040000
#endif
diff --git a/include/configs/imx93_evk.h b/include/configs/imx93_evk.h
index ce6567e..53fb8c9 100644
--- a/include/configs/imx93_evk.h
+++ b/include/configs/imx93_evk.h
@@ -13,7 +13,7 @@
#define CFG_SYS_UBOOT_BASE \
(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
#define CFG_MALLOC_F_ADDR 0x204D0000
#endif
diff --git a/include/configs/kontron-sl-mx8mm.h b/include/configs/kontron-sl-mx8mm.h
index 3a129c5..72a28a6 100644
--- a/include/configs/kontron-sl-mx8mm.h
+++ b/include/configs/kontron-sl-mx8mm.h
@@ -10,7 +10,7 @@
#include <asm/arch/imx-regs.h>
#include <linux/sizes.h>
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
#include <config.h>
#endif
@@ -39,7 +39,7 @@
#undef BOOTENV_RUN_NET_USB_START
#define BOOTENV_RUN_NET_USB_START
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
#define CFG_MALLOC_F_ADDR 0x930000
#endif
diff --git a/include/configs/kontron_pitx_imx8m.h b/include/configs/kontron_pitx_imx8m.h
index 3dda7b6..3f52d00 100644
--- a/include/configs/kontron_pitx_imx8m.h
+++ b/include/configs/kontron_pitx_imx8m.h
@@ -12,7 +12,7 @@
EFI_GUID(0xc898e959, 0x5b1f, 0x4e6d, 0x88, 0xe0, \
0x40, 0xd4, 0x5c, 0xca, 0x13, 0x99)
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
#define CFG_MALLOC_F_ADDR 0x182000
diff --git a/include/configs/librem5.h b/include/configs/librem5.h
index 876b02f..571c772 100644
--- a/include/configs/librem5.h
+++ b/include/configs/librem5.h
@@ -41,7 +41,7 @@
#define CONSOLE "ttymxc0"
#endif
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
func(USB, usb, 0) \
diff --git a/include/configs/linkit-smart-7688.h b/include/configs/linkit-smart-7688.h
index e8f7a59..ec1aa14 100644
--- a/include/configs/linkit-smart-7688.h
+++ b/include/configs/linkit-smart-7688.h
@@ -15,7 +15,7 @@
#define CFG_SYS_UBOOT_BASE 0
/* Serial SPL */
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_SERIAL)
+#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_SERIAL)
#define CFG_SYS_NS16550_CLK 40000000
#define CFG_SYS_NS16550_COM3 0xb0000e00
diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
index e500a7d..a02c752 100644
--- a/include/configs/ls1043a_common.h
+++ b/include/configs/ls1043a_common.h
@@ -8,7 +8,7 @@
#define __LS1043A_COMMON_H
/* SPL build */
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
#define SPL_NO_FMAN
#define SPL_NO_DSPI
#define SPL_NO_PCIE
@@ -19,10 +19,10 @@
#define SPL_NO_QE
#define SPL_NO_EEPROM
#endif
-#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_NAND_BOOT))
+#if (defined(CONFIG_XPL_BUILD) && defined(CONFIG_NAND_BOOT))
#define SPL_NO_MMC
#endif
-#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SD_BOOT_QSPI))
+#if (defined(CONFIG_XPL_BUILD) && defined(CONFIG_SD_BOOT_QSPI))
#define SPL_NO_IFC
#endif
diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h
index 867b098..53ef597 100644
--- a/include/configs/ls1046a_common.h
+++ b/include/configs/ls1046a_common.h
@@ -8,7 +8,7 @@
#define __LS1046A_COMMON_H
/* SPL build */
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
#define SPL_NO_QBMAN
#define SPL_NO_FMAN
#define SPL_NO_ENV
@@ -17,11 +17,11 @@
#define SPL_NO_USB
#define SPL_NO_SATA
#endif
-#if defined(CONFIG_SPL_BUILD) && \
+#if defined(CONFIG_XPL_BUILD) && \
(defined(CONFIG_NAND_BOOT) || defined(CONFIG_QSPI_BOOT))
#define SPL_NO_MMC
#endif
-#if defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_XPL_BUILD)
#define SPL_NO_IFC
#endif
diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
index 34085ee..cdf2819 100644
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@@ -7,7 +7,7 @@
#define __LS1088_COMMON_H
/* SPL build */
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
#define SPL_NO_BOARDINFO
#define SPL_NO_QIXIS
#define SPL_NO_PCI
diff --git a/include/configs/msc_sm2s_imx8mp.h b/include/configs/msc_sm2s_imx8mp.h
index ea5c93e..985b1ca 100644
--- a/include/configs/msc_sm2s_imx8mp.h
+++ b/include/configs/msc_sm2s_imx8mp.h
@@ -20,7 +20,7 @@
#define CFG_FEC_MXC_PHYADDR 1
#endif
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 1) \
func(MMC, mmc, 2)
diff --git a/include/configs/mt7621.h b/include/configs/mt7621.h
index e6dba70..636d62d 100644
--- a/include/configs/mt7621.h
+++ b/include/configs/mt7621.h
@@ -15,7 +15,7 @@
#define CFG_SYS_INIT_SP_OFFSET 0x800000
/* Serial SPL */
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_SERIAL)
+#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_SERIAL)
#define CFG_SYS_NS16550_CLK 50000000
#define CFG_SYS_NS16550_COM1 0xbe000c00
#endif
diff --git a/include/configs/mt7628.h b/include/configs/mt7628.h
index 1df0681..ba876ac 100644
--- a/include/configs/mt7628.h
+++ b/include/configs/mt7628.h
@@ -13,7 +13,7 @@
#define CFG_SYS_INIT_SP_OFFSET 0x80000
/* Serial SPL */
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_SERIAL)
+#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_SERIAL)
#define CFG_SYS_NS16550_CLK 40000000
#define CFG_SYS_NS16550_COM1 0xb0000c00
#endif
diff --git a/include/configs/n2350.h b/include/configs/n2350.h
index f98b9f8..c789df5 100644
--- a/include/configs/n2350.h
+++ b/include/configs/n2350.h
@@ -18,7 +18,7 @@
*/
#include "mv-common.h"
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
#define KERNEL_ADDR_R __stringify(0x1000000)
#define FDT_ADDR_R __stringify(0x2000000)
@@ -39,6 +39,6 @@
"fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
"console=ttyS0,115200\0"
-#endif /* CONFIG_SPL_BUILD */
+#endif /* CONFIG_XPL_BUILD */
#endif /* _CONFIG_N2350_H */
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index f5bd091..23d8917 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -98,7 +98,7 @@
#define CFG_SYS_NAND_U_BOOT_SIZE (832 << 10)
#define CFG_SYS_NAND_U_BOOT_DST (0x11000000)
#define CFG_SYS_NAND_U_BOOT_START (0x11000000)
-#elif defined(CONFIG_SPL_BUILD)
+#elif defined(CONFIG_XPL_BUILD)
#define CFG_SYS_NAND_U_BOOT_SIZE (128 << 10)
#define CFG_SYS_NAND_U_BOOT_DST 0xf8f80000
#define CFG_SYS_NAND_U_BOOT_START 0xf8f80000
@@ -280,7 +280,7 @@
/*
* Config the L2 Cache as L2 SRAM
*/
-#if defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_XPL_BUILD)
#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
#define CFG_SYS_INIT_L2_ADDR 0xf8f80000
#define CFG_SYS_INIT_L2_ADDR_PHYS CFG_SYS_INIT_L2_ADDR
diff --git a/include/configs/phycore_imx8mm.h b/include/configs/phycore_imx8mm.h
index 0910ae2..e74a3f1 100644
--- a/include/configs/phycore_imx8mm.h
+++ b/include/configs/phycore_imx8mm.h
@@ -14,7 +14,7 @@
#define CFG_SYS_UBOOT_BASE \
(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
#define CFG_MALLOC_F_ADDR 0x930000
/* For RAW image gives a error info not panic */
diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h
index 422b89a..3012f64 100644
--- a/include/configs/pico-imx8mq.h
+++ b/include/configs/pico-imx8mq.h
@@ -9,7 +9,7 @@
#include <linux/sizes.h>
#include <asm/arch/imx-regs.h>
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
diff --git a/include/configs/rk3399_common.h b/include/configs/rk3399_common.h
index d652ae4..c5bcd7d 100644
--- a/include/configs/rk3399_common.h
+++ b/include/configs/rk3399_common.h
@@ -13,7 +13,7 @@
#define CFG_SYS_SDRAM_BASE 0
#define SDRAM_MAX_SIZE 0xf8000000
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
#ifndef ROCKCHIP_DEVICE_SETTINGS
#define ROCKCHIP_DEVICE_SETTINGS
@@ -38,6 +38,6 @@
ROCKCHIP_DEVICE_SETTINGS \
"boot_targets=" BOOT_TARGETS "\0"
-#endif /* CONFIG_SPL_BUILD */
+#endif /* CONFIG_XPL_BUILD */
#endif /* __CONFIG_RK3399_COMMON_H */
diff --git a/include/configs/rockchip-common.h b/include/configs/rockchip-common.h
index 9121bba..9b8ab3c 100644
--- a/include/configs/rockchip-common.h
+++ b/include/configs/rockchip-common.h
@@ -11,7 +11,7 @@
#define CFG_CPUID_OFFSET 0x7
#endif
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
#define BOOT_TARGETS "mmc1 mmc0 nvme scsi usb pxe dhcp spi"
diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index 4838bfd..2acfdc7 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -117,7 +117,7 @@
/* SPL NAND boot support */
/* Extra Environment */
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
#ifdef CONFIG_CMD_DHCP
#define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na)
diff --git a/include/configs/stm32mp15_common.h b/include/configs/stm32mp15_common.h
index 29a1197..af6dd4a 100644
--- a/include/configs/stm32mp15_common.h
+++ b/include/configs/stm32mp15_common.h
@@ -33,7 +33,7 @@
#ifdef CONFIG_DISTRO_DEFAULTS
/*****************************************************************************/
-#if !defined(CONFIG_SPL_BUILD)
+#if !defined(CONFIG_XPL_BUILD)
#ifdef CONFIG_CMD_MMC
#define BOOT_TARGET_MMC0(func) func(MMC, mmc, 0)
@@ -129,7 +129,7 @@
STM32MP_EXTRA \
STM32MP_BOARD_EXTRA_ENV
-#endif /* ifndef CONFIG_SPL_BUILD */
+#endif /* ifndef CONFIG_XPL_BUILD */
#endif /* ifdef CONFIG_DISTRO_DEFAULTS*/
#endif /* __CONFIG_STM32MP15_COMMMON_H */
diff --git a/include/configs/stm32mp15_dh_dhsom.h b/include/configs/stm32mp15_dh_dhsom.h
index 6fe6e7b..0f46671 100644
--- a/include/configs/stm32mp15_dh_dhsom.h
+++ b/include/configs/stm32mp15_dh_dhsom.h
@@ -10,7 +10,7 @@
/* PHY needs a longer autoneg timeout */
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
#define CFG_EXTRA_ENV_SETTINGS \
"dfu_alt_info_ram=u-boot.itb ram " \
__stringify(CONFIG_SPL_LOAD_FIT_ADDRESS) \
diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h
index 45f7179..4a7474f 100644
--- a/include/configs/ti_omap3_common.h
+++ b/include/configs/ti_omap3_common.h
@@ -31,7 +31,7 @@
115200}
/* Select serial console configuration */
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
#define CFG_SYS_NS16550_COM1 OMAP34XX_UART1
#define CFG_SYS_NS16550_COM2 OMAP34XX_UART2
#define CFG_SYS_NS16550_COM3 OMAP34XX_UART3
diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h
index c4f116a..7a33309 100644
--- a/include/configs/ti_omap4_common.h
+++ b/include/configs/ti_omap4_common.h
@@ -95,7 +95,7 @@
* So moving TEXT_BASE down to non-HS limit.
*/
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
/* No need for i2c in SPL mode as we will use SRI2C for PMIC access on OMAP4 */
#endif
diff --git a/include/configs/turris_1x.h b/include/configs/turris_1x.h
index 3d398a6..c056149 100644
--- a/include/configs/turris_1x.h
+++ b/include/configs/turris_1x.h
@@ -63,7 +63,7 @@
/*
* For SD card builds without SPL it is needed to set CONFIG_SYS_RAMBOOT
*
- * if CONFIG_SPL_BUILD
+ * if CONFIG_XPL_BUILD
* if CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR
* define CONFIG_SPL_MAX_SIZE = (CONFIG_SYS_L2_SIZE+CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR_DATA
* * SZ_512)
@@ -121,7 +121,7 @@
*/
/* Initial SRAM is used only for SD card boot in first stage image */
-#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
+#if !defined(CONFIG_SPL) || defined(CONFIG_XPL_BUILD)
#define CFG_SYS_INIT_L2_ADDR 0xf8f80000
#define CFG_SYS_INIT_L2_ADDR_PHYS CFG_SYS_INIT_L2_ADDR
/*
diff --git a/include/configs/turris_omnia.h b/include/configs/turris_omnia.h
index 302194b..03a12d5 100644
--- a/include/configs/turris_omnia.h
+++ b/include/configs/turris_omnia.h
@@ -31,7 +31,7 @@
#include "mv-common.h"
/* Include the common distro boot environment */
-#ifndef CONFIG_SPL_BUILD
+#ifndef CONFIG_XPL_BUILD
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
@@ -86,6 +86,6 @@
"bootcmd_rescue=" TURRIS_OMNIA_BOOTCMD_RESCUE "\0" \
BOOTENV
-#endif /* CONFIG_SPL_BUILD */
+#endif /* CONFIG_XPL_BUILD */
#endif /* _CONFIG_TURRIS_OMNIA_H */
diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h
index b018bbe..c54383b 100644
--- a/include/configs/verdin-imx8mm.h
+++ b/include/configs/verdin-imx8mm.h
@@ -12,7 +12,7 @@
#define CFG_SYS_UBOOT_BASE \
(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
#define CFG_MALLOC_F_ADDR 0x930000
/* For RAW image gives a error info not panic */
diff --git a/include/configs/verdin-imx8mp.h b/include/configs/verdin-imx8mp.h
index 0b88e95..bff417f 100644
--- a/include/configs/verdin-imx8mp.h
+++ b/include/configs/verdin-imx8mp.h
@@ -12,13 +12,13 @@
#define CFG_SYS_UBOOT_BASE \
(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
#define CFG_MALLOC_F_ADDR 0x184000
/* For RAW image gives a error info not panic */
-#endif /* CONFIG_SPL_BUILD */
+#endif /* CONFIG_XPL_BUILD */
#define MEM_LAYOUT_ENV_SETTINGS \
"fdt_addr_r=0x50200000\0" \
diff --git a/include/configs/vining_2000.h b/include/configs/vining_2000.h
index 2cf7bc7..752b23d 100644
--- a/include/configs/vining_2000.h
+++ b/include/configs/vining_2000.h
@@ -47,7 +47,7 @@
/* 0=user, 1=boot0, 2=boot1, * 4..7=general0..3. */
#endif
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
#define CFG_MXC_UART_BASE UART1_BASE
#endif
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index de0db7b..bb0db7c 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -183,7 +183,7 @@
#endif
/* SPL can't handle all huge variables - define just DFU */
-#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU)
+#if defined(CONFIG_XPL_BUILD) && defined(CONFIG_SPL_DFU)
#undef CFG_EXTRA_ENV_SETTINGS
# define CFG_EXTRA_ENV_SETTINGS \
"dfu_alt_info_ram=uboot.bin ram 0x8000000 0x1000000;" \
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 03af859..37c77aa 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -44,7 +44,7 @@
/* Boot configuration */
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_XPL_BUILD
#define BOOTENV
#else
@@ -167,7 +167,7 @@
BOOT_TARGET_DEVICES_DHCP(func)
#include <config_distro_bootcmd.h>
-#endif /* CONFIG_SPL_BUILD */
+#endif /* CONFIG_XPL_BUILD */
/* Default environment */
#ifndef CFG_EXTRA_ENV_SETTINGS