powerpc: mpc8xx: cleaning up watchdog
In preparation of migration to DM watchdog, clean up a bit.
The 8xx watchdog really is a HW watchdog, so declare it as is
then it goes through Kconfig
And the watchdog reset doesn't mind getting interrupted, so
no need to disable interrupts
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 77c0333..af45cfe 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -34,6 +34,7 @@
bool "MPC8xx"
select BOARD_EARLY_INIT_F
imply CMD_REGINFO
+ imply HW_WATCHDOG
endchoice
diff --git a/arch/powerpc/cpu/mpc8xx/cpu.c b/arch/powerpc/cpu/mpc8xx/cpu.c
index 6a1bd8d..7608970 100644
--- a/arch/powerpc/cpu/mpc8xx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xx/cpu.c
@@ -272,24 +272,11 @@
/* ------------------------------------------------------------------------- */
-#if defined(CONFIG_WATCHDOG)
-void watchdog_reset(void)
+#if defined(CONFIG_HW_WATCHDOG)
+void hw_watchdog_reset(void)
{
- int re_enable = disable_interrupts();
+ immap_t __iomem *immr = (immap_t __iomem *)CONFIG_SYS_IMMR;
- reset_8xx_watchdog((immap_t __iomem *)CONFIG_SYS_IMMR);
- if (re_enable)
- enable_interrupts();
-}
-#endif /* CONFIG_WATCHDOG */
-
-#if defined(CONFIG_WATCHDOG)
-
-void reset_8xx_watchdog(immap_t __iomem *immr)
-{
- /*
- * All other boards use the MPC8xx Internal Watchdog
- */
out_be16(&immr->im_siu_conf.sc_swsr, 0x556c); /* write magic1 */
out_be16(&immr->im_siu_conf.sc_swsr, 0xaa39); /* write magic2 */
}
diff --git a/arch/powerpc/cpu/mpc8xx/cpu_init.c b/arch/powerpc/cpu/mpc8xx/cpu_init.c
index 6127c9f..99e8c85 100644
--- a/arch/powerpc/cpu/mpc8xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc8xx/cpu_init.c
@@ -26,11 +26,12 @@
/* SYPCR - contains watchdog control (11-9) */
- out_be32(&immr->im_siu_conf.sc_sypcr, CONFIG_SYS_SYPCR);
+#ifndef CONFIG_HW_WATCHDOG
+ /* deactivate watchdog if not enabled in config */
+ out_be32(&immr->im_siu_conf.sc_sypcr, CONFIG_SYS_SYPCR & ~SYPCR_SWE);
+#endif
-#if defined(CONFIG_WATCHDOG)
- reset_8xx_watchdog(immr);
-#endif /* CONFIG_WATCHDOG */
+ WATCHDOG_RESET();
/* SIUMCR - contains debug pin configuration (11-6) */
setbits_be32(&immr->im_siu_conf.sc_siumcr, CONFIG_SYS_SIUMCR);