diff --git a/Makefile b/Makefile
index 1a2ef30..888486b 100644
--- a/Makefile
+++ b/Makefile
@@ -878,7 +878,7 @@
 quiet_cmd_copy = COPY    $@
       cmd_copy = cp $< $@
 
-ifeq ($(CONFIG_FIT_EMBED),y)
+ifeq ($(CONFIG_MULTI_DTB_FIT),y)
 
 fit-dtb.blob: dts/dt.dtb FORCE
 	$(call if_changed,mkimage)
diff --git a/board/ti/ks2_evm/board_k2e.c b/board/ti/ks2_evm/board_k2e.c
index 266a66b..6c77d91 100644
--- a/board/ti/ks2_evm/board_k2e.c
+++ b/board/ti/ks2_evm/board_k2e.c
@@ -166,7 +166,7 @@
 }
 #endif
 
-#if defined(CONFIG_FIT_EMBED)
+#if defined(CONFIG_MULTI_DTB_FIT)
 int board_fit_config_name_match(const char *name)
 {
 	if (!strcmp(name, "keystone-k2e-evm"))
diff --git a/board/ti/ks2_evm/board_k2g.c b/board/ti/ks2_evm/board_k2g.c
index f1c4ddc..01328f1 100644
--- a/board/ti/ks2_evm/board_k2g.c
+++ b/board/ti/ks2_evm/board_k2g.c
@@ -217,7 +217,7 @@
 }
 #endif
 
-#if defined(CONFIG_FIT_EMBED)
+#if defined(CONFIG_MULTI_DTB_FIT)
 int board_fit_config_name_match(const char *name)
 {
 	bool eeprom_read = board_ti_was_eeprom_read();
diff --git a/board/ti/ks2_evm/board_k2hk.c b/board/ti/ks2_evm/board_k2hk.c
index c733099..e99e635 100644
--- a/board/ti/ks2_evm/board_k2hk.c
+++ b/board/ti/ks2_evm/board_k2hk.c
@@ -150,7 +150,7 @@
 }
 #endif
 
-#if defined(CONFIG_FIT_EMBED)
+#if defined(CONFIG_MULTI_DTB_FIT)
 int board_fit_config_name_match(const char *name)
 {
 	if (!strcmp(name, "keystone-k2hk-evm"))
diff --git a/board/ti/ks2_evm/board_k2l.c b/board/ti/ks2_evm/board_k2l.c
index 166367b..c65f331 100644
--- a/board/ti/ks2_evm/board_k2l.c
+++ b/board/ti/ks2_evm/board_k2l.c
@@ -138,7 +138,7 @@
 }
 #endif
 
-#if defined(CONFIG_FIT_EMBED)
+#if defined(CONFIG_MULTI_DTB_FIT)
 int board_fit_config_name_match(const char *name)
 {
 	if (!strcmp(name, "keystone-k2l-evm"))
diff --git a/common/Kconfig b/common/Kconfig
index 3c99650..f96a25f 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -403,22 +403,6 @@
 
 endmenu
 
-config DTB_RESELECT
-	bool "Support swapping dtbs at a later point in boot"
-	depends on FIT_EMBED
-	help
-	  It is possible during initial boot you may need to use a generic
-	  dtb until you can fully determine the board your running on. This
-	  config allows boards to implement a function at a later point
-	  during boot to switch to the "correct" dtb.
-
-config FIT_EMBED
-	bool "Support a FIT image embedded in the U-boot image"
-	help
-	  This option provides hooks to allow U-boot to parse an
-	  appended FIT image and enable board specific code to then select
-	  the correct DTB to be used.
-
 config DEFAULT_FDT_FILE
 	string "Default fdt file"
 	help
diff --git a/common/Makefile b/common/Makefile
index 801ea31..cec506f 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -103,7 +103,7 @@
 obj-$(CONFIG_ANDROID_BOOT_IMAGE) += image-android.o
 obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += image-fdt.o
 obj-$(CONFIG_$(SPL_TPL_)FIT) += image-fit.o
-obj-$(CONFIG_FIT_EMBED) += boot_fit.o common_fit.o
+obj-$(CONFIG_$(SPL_)MULTI_DTB_FIT) += boot_fit.o common_fit.o
 obj-$(CONFIG_$(SPL_TPL_)FIT_SIGNATURE) += image-sig.o
 obj-$(CONFIG_IO_TRACE) += iotrace.o
 obj-y += memsize.o
diff --git a/configs/k2e_evm_defconfig b/configs/k2e_evm_defconfig
index fed6add..b6a5282 100644
--- a/configs/k2e_evm_defconfig
+++ b/configs/k2e_evm_defconfig
@@ -12,7 +12,7 @@
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_DTB_RESELECT=y
-CONFIG_FIT_EMBED=y
+CONFIG_MULTI_DTB_FIT=y
 CONFIG_VERSION_VARIABLE=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL=y
diff --git a/configs/k2g_evm_defconfig b/configs/k2g_evm_defconfig
index 2b29bf4..9c8b66d 100644
--- a/configs/k2g_evm_defconfig
+++ b/configs/k2g_evm_defconfig
@@ -12,7 +12,7 @@
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_DTB_RESELECT=y
-CONFIG_FIT_EMBED=y
+CONFIG_MULTI_DTB_FIT=y
 CONFIG_VERSION_VARIABLE=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL=y
diff --git a/configs/k2hk_evm_defconfig b/configs/k2hk_evm_defconfig
index 80546ec..bfb95ab 100644
--- a/configs/k2hk_evm_defconfig
+++ b/configs/k2hk_evm_defconfig
@@ -12,7 +12,7 @@
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_DTB_RESELECT=y
-CONFIG_FIT_EMBED=y
+CONFIG_MULTI_DTB_FIT=y
 CONFIG_VERSION_VARIABLE=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL=y
diff --git a/configs/k2l_evm_defconfig b/configs/k2l_evm_defconfig
index 732c9d2..7ab0d47 100644
--- a/configs/k2l_evm_defconfig
+++ b/configs/k2l_evm_defconfig
@@ -12,7 +12,7 @@
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_DTB_RESELECT=y
-CONFIG_FIT_EMBED=y
+CONFIG_MULTI_DTB_FIT=y
 CONFIG_VERSION_VARIABLE=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL=y
diff --git a/doc/README.multi-dtb-fit b/doc/README.multi-dtb-fit
new file mode 100644
index 0000000..0d4f068
--- /dev/null
+++ b/doc/README.multi-dtb-fit
@@ -0,0 +1,15 @@
+MULTI DTB FIT
+
+The purpose of this feature is to enable u-boot to select its DTB from a FIT
+appended at the end of the binary.
+
+Usually the DTB is selected by the SPL and passed down to U-Boot. But some
+platforms don't use the SPL. In this case MULTI_DTB_FIT can used to provide
+U-Boot with a choice of DTBs.
+The relevant DTBs are packed into a FIT (list provided by CONFIG__OF_LIST). The
+FIT is automatically generated at the end of the compilation and appended to
+u-boot.bin so that U-Boot can locate it and select the correct DTB from inside
+the FIT.
+The selection is done using board_fit_config_name_match() (same as what the SPL
+uses to select the DTB for U-Boot). The selection happens during fdtdec_setup()
+which is called during before relocation by board_init_f().
diff --git a/dts/Kconfig b/dts/Kconfig
index 4ee0510..454acaa 100644
--- a/dts/Kconfig
+++ b/dts/Kconfig
@@ -102,7 +102,7 @@
 
 config OF_LIST
 	string "List of device tree files to include for DT control"
-	depends on SPL_LOAD_FIT || FIT_EMBED
+	depends on SPL_LOAD_FIT || MULTI_DTB_FIT
 	default DEFAULT_DEVICE_TREE
 	help
 	  This option specifies a list of device tree files to use for DT
@@ -112,6 +112,24 @@
 	  device tree files (without the directory or .dtb suffix)
 	  separated by <space>.
 
+
+config DTB_RESELECT
+	bool "Support swapping dtbs at a later point in boot"
+	depends on MULTI_DTB_FIT
+	help
+	  It is possible during initial boot you may need to use a generic
+	  dtb until you can fully determine the board your running on. This
+	  config allows boards to implement a function at a later point
+	  during boot to switch to the "correct" dtb.
+
+config MULTI_DTB_FIT
+	bool "Support embedding several DTBs in a FIT image for u-boot"
+	help
+	  This option provides hooks to allow U-boot to parse an
+	  appended FIT image and enable board specific code to then select
+	  the correct DTB to be used. Use this if you need to support
+	  multiple DTBs but don't use the SPL.
+
 config OF_SPL_REMOVE_PROPS
 	string "List of device tree properties to drop for SPL"
 	depends on SPL_OF_CONTROL
diff --git a/lib/fdtdec.c b/lib/fdtdec.c
index 107a892..630e040 100644
--- a/lib/fdtdec.c
+++ b/lib/fdtdec.c
@@ -1217,7 +1217,7 @@
 	else
 		gd->fdt_blob = (ulong *)&__bss_end;
 
-#  elif defined CONFIG_FIT_EMBED
+#  elif defined CONFIG_MULTI_DTB_FIT
 	gd->fdt_blob = locate_dtb_in_fit(&_end);
 
 	if (gd->fdt_blob == NULL || gd->fdt_blob <= ((void *)&_end)) {