phy: cadence: Sierra: Fix PHY power_on sequence
Commit 39b823381d9d ("phy: cadence: Add driver for Sierra PHY")
de-asserts PHY_RESET even before the configurations are loaded in
phy_init(). However PHY_RESET should be de-asserted only after
all the configurations has been initialized, instead of de-asserting
in probe. Fix it here.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
diff --git a/drivers/phy/cadence/phy-cadence-sierra.c b/drivers/phy/cadence/phy-cadence-sierra.c
index 6b26b30..bd42145 100644
--- a/drivers/phy/cadence/phy-cadence-sierra.c
+++ b/drivers/phy/cadence/phy-cadence-sierra.c
@@ -296,6 +296,12 @@
u32 val;
int ret;
+ ret = reset_control_deassert(sp->phy_rst);
+ if (ret) {
+ dev_err(dev, "Failed to take the PHY out of reset\n");
+ return ret;
+ }
+
/* Take the PHY lane group out of reset */
ret = reset_deassert_bulk(ins->lnk_rst);
if (ret) {
@@ -544,7 +550,6 @@
if (!sp->autoconf && sp->nsubnodes > 1)
regmap_field_write(sp->phy_pll_cfg_1, 0x1);
- reset_control_deassert(sp->phy_rst);
dev_info(dev, "sierra probed\n");
return 0;