ARM: uniphier: add ProXstream2 and PH1-LD6b support
The DDR SDRAM initialization code has not been mainlined yet, but
U-Boot proper should work.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
diff --git a/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld6b.c b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld6b.c
new file mode 100644
index 0000000..4f950d3
--- /dev/null
+++ b/arch/arm/mach-uniphier/pinctrl/pinctrl-ph1-ld6b.c
@@ -0,0 +1,45 @@
+/*
+ * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <linux/io.h>
+#include <mach/init.h>
+#include <mach/sg-regs.h>
+
+void ph1_ld6b_pin_init(void)
+{
+ /* Comment format: PAD Name -> Function Name */
+
+#ifdef CONFIG_NAND_DENALI
+ sg_set_pinsel(30, 0, 8, 4); /* XNFRE -> XNFRE */
+ sg_set_pinsel(31, 0, 8, 4); /* XNFWE -> XNFWE */
+ sg_set_pinsel(32, 0, 8, 4); /* NFALE -> NFALE */
+ sg_set_pinsel(33, 0, 8, 4); /* NFCLE -> NFCLE */
+ sg_set_pinsel(34, 0, 8, 4); /* XNFWP -> XNFWP */
+ sg_set_pinsel(35, 0, 8, 4); /* XNFCE0 -> XNFCE0 */
+ sg_set_pinsel(36, 0, 8, 4); /* NRYBY0 -> NRYBY0 */
+ sg_set_pinsel(37, 0, 8, 4); /* XNFCE1 -> NRYBY1 */
+ sg_set_pinsel(38, 0, 8, 4); /* NRYBY1 -> XNFCE1 */
+ sg_set_pinsel(39, 0, 8, 4); /* NFD0 -> NFD0 */
+ sg_set_pinsel(40, 0, 8, 4); /* NFD1 -> NFD1 */
+ sg_set_pinsel(41, 0, 8, 4); /* NFD2 -> NFD2 */
+ sg_set_pinsel(42, 0, 8, 4); /* NFD3 -> NFD3 */
+ sg_set_pinsel(43, 0, 8, 4); /* NFD4 -> NFD4 */
+ sg_set_pinsel(44, 0, 8, 4); /* NFD5 -> NFD5 */
+ sg_set_pinsel(45, 0, 8, 4); /* NFD6 -> NFD6 */
+ sg_set_pinsel(46, 0, 8, 4); /* NFD7 -> NFD7 */
+#endif
+
+#ifdef CONFIG_USB_XHCI_UNIPHIER
+ sg_set_pinsel(56, 0, 8, 4); /* USB0VBUS -> USB0VBUS */
+ sg_set_pinsel(57, 0, 8, 4); /* USB0OD -> USB0OD */
+ sg_set_pinsel(58, 0, 8, 4); /* USB1VBUS -> USB1VBUS */
+ sg_set_pinsel(59, 0, 8, 4); /* USB1OD -> USB1OD */
+ sg_set_pinsel(60, 0, 8, 4); /* USB2VBUS -> USB2VBUS */
+ sg_set_pinsel(61, 0, 8, 4); /* USB2OD -> USB2OD */
+ sg_set_pinsel(62, 0, 8, 4); /* USB3VBUS -> USB3VBUS */
+ sg_set_pinsel(63, 0, 8, 4); /* USB3OD -> USB3OD */
+#endif
+}