board: milkv_duo: Add init code for Milk-V Duo ethernet
Initialize register in cv1800b ethernet phy to make it compatible with
generic phy driver
Signed-off-by: Kongyang Liu <seashell11234455@gmail.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
diff --git a/board/sophgo/milkv_duo/Makefile b/board/sophgo/milkv_duo/Makefile
index a087013..d0525eb 100644
--- a/board/sophgo/milkv_duo/Makefile
+++ b/board/sophgo/milkv_duo/Makefile
@@ -2,4 +2,5 @@
#
# Copyright (c) 2024, Kongyang Liu <seashell11234455@gmail.com>
-obj-y := board.o
+obj-y += board.o
+obj-$(CONFIG_NET) += ethernet.o
diff --git a/board/sophgo/milkv_duo/board.c b/board/sophgo/milkv_duo/board.c
index e7e28fe..9adbb08 100644
--- a/board/sophgo/milkv_duo/board.c
+++ b/board/sophgo/milkv_duo/board.c
@@ -3,11 +3,17 @@
* Copyright (c) 2024, Kongyang Liu <seashell11234455@gmail.com>
*/
- #include <dm/lists.h>
+#include <dm/lists.h>
+
+#include "ethernet.h"
int board_init(void)
{
if (IS_ENABLED(CONFIG_SYSRESET_CV1800B))
device_bind_driver(gd->dm_root, "cv1800b_sysreset", "sysreset", NULL);
+
+ if (IS_ENABLED(CONFIG_NET))
+ cv1800b_ephy_init();
+
return 0;
}
diff --git a/board/sophgo/milkv_duo/ethernet.c b/board/sophgo/milkv_duo/ethernet.c
new file mode 100644
index 0000000..e997ce1
--- /dev/null
+++ b/board/sophgo/milkv_duo/ethernet.c
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2024, Kongyang Liu <seashell11234455@gmail.com>
+ */
+
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/mii.h>
+
+#define REG_EPHY_TOP_WRAP (u32 *)0x03009800
+#define REG_EPHY_BASE (u32 *)0x03009000
+
+#define REG_EPHY_CTL REG_EPHY_TOP_WRAP
+#define REG_EPHY_APB_RW_SEL REG_EPHY_TOP_WRAP + 1
+
+/* Page 0 register */
+#define REG_PHY_ID1 REG_EPHY_BASE + MII_PHYSID1
+#define REG_PHY_ID2 REG_EPHY_BASE + MII_PHYSID2
+#define REG_PHY_PAGE_SEL REG_EPHY_BASE + 0x1f
+
+/* Page 5 register */
+#define REG_PD_EN_CTL REG_EPHY_BASE + 0x10
+
+/* REG_EPHY_CTL */
+#define REG_EPHY_SHUTDOWN BIT(0)
+#define REG_EPHY_ANA_RST_N BIT(1)
+#define REG_EPHY_DIG_RST_N BIT(2)
+#define REG_EPHY_MAIN_RST_N BIT(3)
+
+/* REG_PD_EN_CTL */
+#define REG_EN_ETH_TXRT BIT(0)
+#define REG_EN_ETH_CLK100M BIT(1)
+#define REG_EN_ETH_CLK125M BIT(2)
+#define REG_EN_ETH_PLL_LCKDET BIT(3)
+#define REG_EN_ETH_RXADC BIT(4)
+#define REG_EN_ETH_RXPGA BIT(5)
+#define REG_EN_ETH_RXRT BIT(6)
+#define REG_EN_ETH_TXCROSSOVER BIT(7)
+#define REG_PD_ETH_PLL BIT(8)
+#define REG_PD_ETH_TXDAC BIT(9)
+#define REG_PD_ETH_TXDACBST BIT(10)
+#define REG_PD_ETH_TXECHO BIT(11)
+#define REG_PD_ETH_TXDRV_NMOS BIT(12)
+#define REG_PD_ETH_TXLDO BIT(13)
+
+void cv1800b_ephy_init(void)
+{
+ u32 reg;
+ u32 phy_id = 1;
+
+ /* enable direct memory access for phy register */
+ writel(1, REG_EPHY_APB_RW_SEL);
+
+ reg = readl(REG_EPHY_CTL);
+ reg &= ~REG_EPHY_SHUTDOWN;
+ reg |= REG_EPHY_ANA_RST_N | REG_EPHY_DIG_RST_N | REG_EPHY_MAIN_RST_N;
+ writel(reg, REG_EPHY_CTL);
+
+ /* switch to page 5 */
+ writel(5 << 8, REG_PHY_PAGE_SEL);
+ reg = readl(REG_PD_EN_CTL);
+ reg &= ~(REG_PD_ETH_TXLDO | REG_PD_ETH_TXDRV_NMOS | REG_PD_ETH_TXDAC | REG_PD_ETH_PLL);
+ reg |= REG_EN_ETH_TXRT | REG_EN_ETH_CLK100M | REG_EN_ETH_CLK125M
+ | REG_EN_ETH_PLL_LCKDET | REG_EN_ETH_RXADC | REG_EN_ETH_RXPGA | REG_EN_ETH_RXRT;
+ writel(reg, REG_PD_EN_CTL);
+
+ /* switch to page 0 */
+ writel(0 << 8, REG_PHY_PAGE_SEL);
+ /*
+ * As the phy_id in the cv1800b PHY register is initialized to 0, it
+ * is necessary to manually initialize the phy_id to an arbitrary
+ * value so that it could corresponds to the generic PHY driver.
+ */
+ writel(phy_id >> 16, REG_PHY_ID1);
+ writel(phy_id & 0xffff, REG_PHY_ID2);
+
+ /* switch to MDIO control */
+ writel(0, REG_EPHY_APB_RW_SEL);
+}
diff --git a/board/sophgo/milkv_duo/ethernet.h b/board/sophgo/milkv_duo/ethernet.h
new file mode 100644
index 0000000..7b21f1b
--- /dev/null
+++ b/board/sophgo/milkv_duo/ethernet.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2024, Kongyang Liu <seashell11234455@gmail.com>
+ */
+
+#ifndef __CV1800B_ETHERNET_H
+#define __CV1800B_ETHERNET_H
+
+void cv1800b_ephy_init(void);
+
+#endif