mpc83xx: Migrate CONFIG_SYS_{BR, OR}*_PRELIM to Kconfig
Migrate the BR/OR settings to Kconfig. These must be known at compile
time, so cannot be configured via DT.
Configuration of this crucial variable should still be somewhat
comfortable. Hence, make its fields configurable in Kconfig, and
assemble the final value from these.
Signed-off-by: Mario Six <mario.six@gdsys.cc>
diff --git a/configs/MPC837XEMDS_SLAVE_defconfig b/configs/MPC837XEMDS_SLAVE_defconfig
index ba58e49..9e2966b 100644
--- a/configs/MPC837XEMDS_SLAVE_defconfig
+++ b/configs/MPC837XEMDS_SLAVE_defconfig
@@ -84,3 +84,44 @@
# CONFIG_PCI is not set
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
+CONFIG_ELBC_BR0_OR0=y
+CONFIG_BR0_OR0_NAME="FLASH"
+CONFIG_BR0_OR0_BASE=0xFE000000
+CONFIG_BR0_MACHINE_GPCM=y
+CONFIG_BR0_PORTSIZE_16BIT=y
+CONFIG_OR0_AM_32_MBYTES=y
+CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y
+CONFIG_OR0_CSNT_EARLIER=y
+CONFIG_OR0_EAD_EXTRA=y
+CONFIG_OR0_SCY_15=y
+CONFIG_OR0_XACS_EXTENDED=y
+CONFIG_OR0_XAM_SET=y
+CONFIG_OR0_TRLX_RELAXED=y
+CONFIG_OR0_EHTR_8_CYCLE=y
+CONFIG_ELBC_BR1_OR1=y
+CONFIG_BR1_OR1_NAME="BCSR"
+CONFIG_BR1_OR1_BASE=0xF8000000
+CONFIG_BR1_MACHINE_GPCM=y
+CONFIG_BR1_PORTSIZE_8BIT=y
+CONFIG_OR1_AM_32_KBYTES=y
+CONFIG_OR1_CSNT_EARLIER=y
+CONFIG_OR1_EAD_EXTRA=y
+CONFIG_OR1_SCY_15=y
+CONFIG_OR1_XACS_EXTENDED=y
+CONFIG_OR1_XAM_SET=y
+CONFIG_OR1_TRLX_RELAXED=y
+CONFIG_OR1_EHTR_8_CYCLE=y
+CONFIG_ELBC_BR3_OR3=y
+CONFIG_BR3_OR3_NAME="NAND"
+CONFIG_BR3_OR3_BASE=0xE0600000
+CONFIG_BR3_ERRORCHECKING_BOTH=y
+CONFIG_BR3_MACHINE_FCM=y
+CONFIG_BR3_PORTSIZE_8BIT=y
+CONFIG_OR3_AM_32_KBYTES=y
+CONFIG_OR3_BCTLD_NOT_ASSERTED=y
+CONFIG_OR3_RST_ONE_CLOCK=y
+CONFIG_OR3_SCY_1=y
+CONFIG_OR3_TRLX_RELAXED=y
+CONFIG_OR3_CHT_TWO_CLOCK=y
+CONFIG_OR3_CST_ONE_CLOCK=y
+CONFIG_OR3_EHTR_8_CYCLE=y