mpc83xx: Migrate CONFIG_SYS_{BR, OR}*_PRELIM to Kconfig
Migrate the BR/OR settings to Kconfig. These must be known at compile
time, so cannot be configured via DT.
Configuration of this crucial variable should still be somewhat
comfortable. Hence, make its fields configurable in Kconfig, and
assemble the final value from these.
Signed-off-by: Mario Six <mario.six@gdsys.cc>
diff --git a/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc0 b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc0
new file mode 100644
index 0000000..23e81ab
--- /dev/null
+++ b/arch/powerpc/cpu/mpc83xx/elbc/Kconfig.elbc0
@@ -0,0 +1,733 @@
+menuconfig ELBC_BR0_OR0
+ bool "ELBC BR0/OR0"
+
+if ELBC_BR0_OR0
+
+config BR0_OR0_NAME
+ string "Identifier"
+
+config BR0_OR0_BASE
+ hex "Port base"
+
+choice
+ prompt "Port size"
+
+config BR0_PORTSIZE_8BIT
+ bool "8-bit"
+
+config BR0_PORTSIZE_16BIT
+ depends on !BR0_MACHINE_FCM
+ bool "16-bit"
+
+
+config BR0_PORTSIZE_32BIT
+ depends on !BR0_MACHINE_FCM
+ depends on ARCH_MPC8349 || ARCH_MPC8360 || ARCH_MPC8379
+ bool "32-bit"
+
+endchoice
+
+if BR0_MACHINE_FCM
+
+choice
+ prompt "Data Error Checking"
+
+config BR0_ERRORCHECKING_DISABLED
+ bool "Disabled"
+
+config BR0_ERRORCHECKING_ECC_CHECKING
+ bool "ECC checking / No ECC generation"
+
+config BR0_ERRORCHECKING_BOTH
+ bool "ECC checking and generation"
+
+endchoice
+
+endif
+
+config BR0_WRITE_PROTECT
+ bool "Write-protect"
+
+config BR0_MACHINE_UPM
+ bool
+
+choice
+ prompt "Machine select"
+
+config BR0_MACHINE_GPCM
+ bool "GPCM"
+
+config BR0_MACHINE_FCM
+ depends on !ARCH_MPC832X && !ARCH_MPC8349 && !ARCH_MPC8360
+ bool "FCM"
+
+config BR0_MACHINE_SDRAM
+ depends on ARCH_MPC8349 || ARCH_MPC8360
+ bool "SDRAM"
+
+config BR0_MACHINE_UPMA
+ select BR0_MACHINE_UPM
+ bool "UPM (A)"
+
+config BR0_MACHINE_UPMB
+ select BR0_MACHINE_UPM
+ bool "UPM (B)"
+
+config BR0_MACHINE_UPMC
+ select BR0_MACHINE_UPM
+ bool "UPM (C)"
+
+endchoice
+
+if ARCH_MPC8313 || ARCH_MPC8323 || ARCH_MPC8360
+
+choice
+ prompt "Atomic operations"
+
+config BR0_ATOMIC_NONE
+ bool "No atomic operations"
+
+config BR0_ATOMIC_RAWA
+ bool "Read-after-write-atomic"
+
+config BR0_ATOMIC_WARA
+ bool "Write-after-read-atomic"
+
+endchoice
+
+endif
+
+if BR0_MACHINE_GPCM || BR0_MACHINE_FCM || BR0_MACHINE_UPM || BR0_MACHINE_SDRAM
+
+choice
+ prompt "Address mask"
+
+config OR0_AM_32_KBYTES
+ depends on !BR0_MACHINE_SDRAM
+ bool "32 kb"
+
+config OR0_AM_64_KBYTES
+ bool "64 kb"
+
+config OR0_AM_128_KBYTES
+ bool "128 kb"
+
+config OR0_AM_256_KBYTES
+ bool "256 kb"
+
+config OR0_AM_512_KBYTES
+ bool "512 kb"
+
+config OR0_AM_1_MBYTES
+ bool "1 mb"
+
+config OR0_AM_2_MBYTES
+ bool "2 mb"
+
+config OR0_AM_4_MBYTES
+ bool "4 mb"
+
+config OR0_AM_8_MBYTES
+ bool "8 mb"
+
+config OR0_AM_16_MBYTES
+ bool "16 mb"
+
+config OR0_AM_32_MBYTES
+ bool "32 mb"
+
+config OR0_AM_64_MBYTES
+ bool "64 mb"
+
+# XXX: Some boards define 128MB AM with GPCM, even though it should not be
+# possible according to the manuals
+config OR0_AM_128_MBYTES
+ bool "128 mb"
+
+# XXX: Some boards define 256MB AM with GPCM, even though it should not be
+# possible according to the manuals
+config OR0_AM_256_MBYTES
+ bool "256 mb"
+
+config OR0_AM_512_MBYTES
+ depends on BR0_MACHINE_FCM
+ bool "512 mb"
+
+# XXX: Some boards define 1GB AM with GPCM, even though it should not be
+# possible according to the manuals
+config OR0_AM_1_GBYTES
+ bool "1 gb"
+
+config OR0_AM_2_GBYTES
+ depends on BR0_MACHINE_FCM
+ bool "2 gb"
+
+config OR0_AM_4_GBYTES
+ depends on BR0_MACHINE_FCM
+ bool "4 gb"
+
+endchoice
+
+config OR0_XAM_SET
+ bool "Set unused bytes after address mask"
+choice
+ prompt "Buffer control disable"
+
+config OR0_BCTLD_ASSERTED
+ bool "Asserted"
+
+config OR0_BCTLD_NOT_ASSERTED
+ bool "Not asserted"
+
+endchoice
+
+endif
+
+if BR0_MACHINE_GPCM || BR0_MACHINE_FCM
+
+choice
+ prompt "Cycle length in bus clocks"
+
+config OR0_SCY_0
+ bool "No wait states"
+
+config OR0_SCY_1
+ bool "1 wait state"
+
+config OR0_SCY_2
+ bool "2 wait states"
+
+config OR0_SCY_3
+ bool "3 wait states"
+
+config OR0_SCY_4
+ bool "4 wait states"
+
+config OR0_SCY_5
+ bool "5 wait states"
+
+config OR0_SCY_6
+ bool "6 wait states"
+
+config OR0_SCY_7
+ bool "7 wait states"
+
+config OR0_SCY_8
+ depends on BR0_MACHINE_GPCM
+ bool "8 wait states"
+
+config OR0_SCY_9
+ depends on BR0_MACHINE_GPCM
+ bool "9 wait states"
+
+config OR0_SCY_10
+ depends on BR0_MACHINE_GPCM
+ bool "10 wait states"
+
+config OR0_SCY_11
+ depends on BR0_MACHINE_GPCM
+ bool "11 wait states"
+
+config OR0_SCY_12
+ depends on BR0_MACHINE_GPCM
+ bool "12 wait states"
+
+config OR0_SCY_13
+ depends on BR0_MACHINE_GPCM
+ bool "13 wait states"
+
+config OR0_SCY_14
+ depends on BR0_MACHINE_GPCM
+ bool "14 wait states"
+
+config OR0_SCY_15
+ depends on BR0_MACHINE_GPCM
+ bool "15 wait states"
+
+endchoice
+
+endif # BR0_MACHINE_GPCM || BR0_MACHINE_FCM
+
+if BR0_MACHINE_GPCM
+
+choice
+ prompt "Chip select negotiation time"
+
+config OR0_CSNT_NORMAL
+ bool "Normal"
+
+config OR0_CSNT_EARLIER
+ bool "Earlier"
+
+endchoice
+
+choice
+ prompt "Address to chip-select setup"
+
+config OR0_ACS_SAME_TIME
+ bool "At the same time"
+
+config OR0_ACS_HALF_CYCLE_EARLIER
+ bool "Half of a bus clock cycle earlier"
+
+config OR0_ACS_QUARTER_CYCLE_EARLIER
+ bool "Half/Quarter of a bus clock cycle earlier"
+
+endchoice
+
+choice
+ prompt "Extra address to check-select setup"
+
+config OR0_XACS_NORMAL
+ bool "Normal"
+
+config OR0_XACS_EXTENDED
+ bool "Extended"
+
+endchoice
+
+choice
+ prompt "External address termination"
+
+config OR0_SETA_INTERNAL
+ bool "Access is terminated internally"
+
+config OR0_SETA_EXTERNAL
+ bool "Access is terminated externally"
+
+endchoice
+
+endif # BR0_MACHINE_GPCM
+
+if BR0_MACHINE_FCM
+
+choice
+ prompt "NAND Flash EEPROM page size"
+
+config OR0_PGS_SMALL
+ bool "Small page device"
+
+config OR0_PGS_LARGE
+ bool "Large page device"
+
+endchoice
+
+choice
+ prompt "Chip select to command time"
+
+config OR0_CSCT_1_CYCLE
+ depends on OR0_TRLX_NORMAL
+ bool "1 cycle"
+
+config OR0_CSCT_2_CYCLE
+ depends on OR0_TRLX_RELAXED
+ bool "2 cycles"
+
+config OR0_CSCT_4_CYCLE
+ depends on OR0_TRLX_NORMAL
+ bool "4 cycles"
+
+config OR0_CSCT_8_CYCLE
+ depends on OR0_TRLX_RELAXED
+ bool "8 cycles"
+
+endchoice
+
+choice
+ prompt "Command setup time"
+
+config OR0_CST_COINCIDENT
+ depends on OR0_TRLX_NORMAL
+ bool "Coincident with any command"
+
+config OR0_CST_QUARTER_CLOCK
+ depends on OR0_TRLX_NORMAL
+ bool "0.25 clocks after"
+
+config OR0_CST_HALF_CLOCK
+ depends on OR0_TRLX_RELAXED
+ bool "0.5 clocks after"
+
+config OR0_CST_ONE_CLOCK
+ depends on OR0_TRLX_RELAXED
+ bool "1 clock after"
+
+endchoice
+
+choice
+ prompt "Command hold time"
+
+config OR0_CHT_HALF_CLOCK
+ depends on OR0_TRLX_NORMAL
+ bool "0.5 clocks before"
+
+config OR0_CHT_ONE_CLOCK
+ depends on OR0_TRLX_NORMAL
+ bool "1 clock before"
+
+config OR0_CHT_ONE_HALF_CLOCK
+ depends on OR0_TRLX_RELAXED
+ bool "1.5 clocks before"
+
+config OR0_CHT_TWO_CLOCK
+ depends on OR0_TRLX_RELAXED
+ bool "2 clocks before"
+
+endchoice
+
+choice
+ prompt "Reset setup time"
+
+config OR0_RST_THREE_QUARTER_CLOCK
+ depends on OR0_TRLX_NORMAL
+ bool "0.75 clocks prior"
+
+config OR0_RST_ONE_HALF_CLOCK
+ depends on OR0_TRLX_RELAXED
+ bool "0.5 clocks prior"
+
+config OR0_RST_ONE_CLOCK
+ bool "1 clock prior"
+
+endchoice
+
+endif # BR0_MACHINE_FCM
+
+if BR0_MACHINE_UPM
+
+choice
+ prompt "Burst inhibit"
+
+config OR0_BI_BURSTSUPPORT
+ bool "Support burst access"
+
+config OR0_BI_BURSTINHIBIT
+ bool "Inhibit burst access"
+
+endchoice
+
+endif # BR0_MACHINE_UPM
+
+if BR0_MACHINE_SDRAM
+
+choice
+ prompt "Number of column address lines"
+
+config OR0_COLS_7
+ bool "7"
+
+config OR0_COLS_8
+ bool "8"
+
+config OR0_COLS_9
+ bool "9"
+
+config OR0_COLS_10
+ bool "10"
+
+config OR0_COLS_11
+ bool "11"
+
+config OR0_COLS_12
+ bool "12"
+
+config OR0_COLS_13
+ bool "13"
+
+config OR0_COLS_14
+ bool "14"
+
+endchoice
+
+choice
+ prompt "Number of rows address lines"
+
+config OR0_ROWS_9
+ bool "9"
+
+config OR0_ROWS_10
+ bool "10"
+
+config OR0_ROWS_11
+ bool "11"
+
+config OR0_ROWS_12
+ bool "12"
+
+config OR0_ROWS_13
+ bool "13"
+
+config OR0_ROWS_14
+ bool "14"
+
+config OR0_ROWS_15
+ bool "15"
+
+endchoice
+
+choice
+ prompt "Page mode select"
+
+config OR0_PMSEL_BTB
+ bool "Back-to-back"
+
+config OR0_PMSEL_KEPT_OPEN
+ bool "Page kept open until page miss or refresh"
+
+endchoice
+
+endif # BR0_MACHINE_SDRAM
+
+choice
+ prompt "Relaxed timing"
+
+config OR0_TRLX_NORMAL
+ bool "Normal"
+
+config OR0_TRLX_RELAXED
+ bool "Relaxed"
+
+endchoice
+
+choice
+ prompt "Extended hold time"
+
+config OR0_EHTR_NORMAL
+ depends on OR0_TRLX_NORMAL
+ bool "Normal"
+
+config OR0_EHTR_1_CYCLE
+ depends on OR0_TRLX_NORMAL
+ bool "1 idle clock cycle inserted"
+
+config OR0_EHTR_4_CYCLE
+ depends on OR0_TRLX_RELAXED
+ bool "4 idle clock cycles inserted"
+
+config OR0_EHTR_8_CYCLE
+ depends on OR0_TRLX_RELAXED
+ bool "8 idle clock cycles inserted"
+
+endchoice
+
+if !ARCH_MPC8308
+
+choice
+ prompt "External address latch delay"
+
+config OR0_EAD_NONE
+ bool "None"
+
+config OR0_EAD_EXTRA
+ bool "Extra"
+
+endchoice
+
+endif # !ARCH_MPC8308
+
+endif # ELBC_BR0_OR0
+
+config BR0_PORTSIZE
+ hex
+ default 0x800 if BR0_PORTSIZE_8BIT
+ default 0x1000 if BR0_PORTSIZE_16BIT
+ default 0x1800 if BR0_PORTSIZE_32BIT
+
+config BR0_ERRORCHECKING
+ hex
+ default 0x0 if !BR0_MACHINE_FCM
+ default 0x0 if BR0_ERRORCHECKING_DISABLED
+ default 0x200 if BR0_ERRORCHECKING_ECC_CHECKING
+ default 0x400 if BR0_ERRORCHECKING_BOTH
+
+config BR0_WRITE_PROTECT_BIT
+ hex
+ default 0x0 if !BR0_WRITE_PROTECT
+ default 0x100 if BR0_WRITE_PROTECT
+
+config BR0_MACHINE
+ hex
+ default 0x0 if BR0_MACHINE_GPCM
+ default 0x20 if BR0_MACHINE_FCM
+ default 0x60 if BR0_MACHINE_SDRAM
+ default 0x80 if BR0_MACHINE_UPMA
+ default 0xa0 if BR0_MACHINE_UPMB
+ default 0xc0 if BR0_MACHINE_UPMC
+
+config BR0_ATOMIC
+ hex
+ default 0x0 if !ARCH_MPC8313 && !ARCH_MPC8323 && !ARCH_MPC8360
+ default 0x0 if BR0_ATOMIC_NONE
+ default 0x4 if BR0_ATOMIC_RAWA
+ default 0x8 if BR0_ATOMIC_WARA
+
+config BR0_VALID_BIT
+ hex
+ default 0x0 if !ELBC_BR0_OR0
+ default 0x1 if ELBC_BR0_OR0
+
+config OR0_AM
+ hex
+ default 0xffff8000 if OR0_AM_32_KBYTES && !BR0_MACHINE_SDRAM
+ default 0xffff0000 if OR0_AM_64_KBYTES
+ default 0xfffe0000 if OR0_AM_128_KBYTES
+ default 0xfffc0000 if OR0_AM_256_KBYTES
+ default 0xfff80000 if OR0_AM_512_KBYTES
+ default 0xfff00000 if OR0_AM_1_MBYTES
+ default 0xffe00000 if OR0_AM_2_MBYTES
+ default 0xffc00000 if OR0_AM_4_MBYTES
+ default 0xff800000 if OR0_AM_8_MBYTES
+ default 0xff000000 if OR0_AM_16_MBYTES
+ default 0xfe000000 if OR0_AM_32_MBYTES
+ default 0xfc000000 if OR0_AM_64_MBYTES
+ default 0xf8000000 if OR0_AM_128_MBYTES
+ default 0xf0000000 if OR0_AM_256_MBYTES
+ default 0xe0000000 if OR0_AM_512_MBYTES
+ default 0xc0000000 if OR0_AM_1_GBYTES
+ default 0x80000000 if OR0_AM_2_GBYTES
+ default 0x00000000 if OR0_AM_4_GBYTES
+
+config OR0_XAM
+ hex
+ default 0x0 if !OR0_XAM_SET
+ default 0x6000 if OR0_XAM_SET
+
+config OR0_BCTLD
+ hex
+ default 0x0 if OR0_BCTLD_ASSERTED
+ default 0x1000 if OR0_BCTLD_NOT_ASSERTED
+
+config OR0_BI
+ hex
+ default 0x0 if !BR0_MACHINE_UPM
+ default 0x0 if OR0_BI_BURSTSUPPORT
+ default 0x100 if OR0_BI_BURSTINHIBIT
+
+config OR0_COLS
+ hex
+ default 0x0 if !BR0_MACHINE_SDRAM
+ default 0x0 if OR0_COLS_7
+ default 0x400 if OR0_COLS_8
+ default 0x800 if OR0_COLS_9
+ default 0xc00 if OR0_COLS_10
+ default 0x1000 if OR0_COLS_11
+ default 0x1400 if OR0_COLS_12
+ default 0x1800 if OR0_COLS_13
+ default 0x1c00 if OR0_COLS_14
+
+config OR0_ROWS
+ hex
+ default 0x0 if !BR0_MACHINE_SDRAM
+ default 0x0 if OR0_ROWS_9
+ default 0x40 if OR0_ROWS_10
+ default 0x80 if OR0_ROWS_11
+ default 0xc0 if OR0_ROWS_12
+ default 0x100 if OR0_ROWS_13
+ default 0x140 if OR0_ROWS_14
+ default 0x180 if OR0_ROWS_15
+
+config OR0_PMSEL
+ hex
+ default 0x0 if !BR0_MACHINE_SDRAM
+ default 0x0 if OR0_PMSEL_BTB
+ default 0x20 if OR0_PMSEL_KEPT_OPEN
+
+config OR0_SCY
+ hex
+ default 0x0 if !BR0_MACHINE_GPCM && !BR0_MACHINE_FCM
+ default 0x0 if OR0_SCY_0
+ default 0x10 if OR0_SCY_1
+ default 0x20 if OR0_SCY_2
+ default 0x30 if OR0_SCY_3
+ default 0x40 if OR0_SCY_4
+ default 0x50 if OR0_SCY_5
+ default 0x60 if OR0_SCY_6
+ default 0x70 if OR0_SCY_7
+ default 0x80 if OR0_SCY_8
+ default 0x90 if OR0_SCY_9
+ default 0xa0 if OR0_SCY_10
+ default 0xb0 if OR0_SCY_11
+ default 0xc0 if OR0_SCY_12
+ default 0xd0 if OR0_SCY_13
+ default 0xe0 if OR0_SCY_14
+ default 0xf0 if OR0_SCY_15
+
+config OR0_PGS
+ hex
+ default 0x0 if !BR0_MACHINE_FCM
+ default 0x0 if OR0_PGS_SMALL
+ default 0x400 if OR0_PGS_LARGE
+
+config OR0_CSCT
+ hex
+ default 0x0 if !BR0_MACHINE_FCM
+ default 0x0 if OR0_CSCT_1_CYCLE
+ default 0x0 if OR0_CSCT_2_CYCLE
+ default 0x200 if OR0_CSCT_4_CYCLE
+ default 0x200 if OR0_CSCT_8_CYCLE
+
+config OR0_CST
+ hex
+ default 0x0 if !BR0_MACHINE_FCM
+ default 0x0 if OR0_CST_COINCIDENT
+ default 0x100 if OR0_CST_QUARTER_CLOCK
+ default 0x0 if OR0_CST_HALF_CLOCK
+ default 0x100 if OR0_CST_ONE_CLOCK
+
+config OR0_CHT
+ hex
+ default 0x0 if !BR0_MACHINE_FCM
+ default 0x0 if OR0_CHT_HALF_CLOCK
+ default 0x80 if OR0_CHT_ONE_CLOCK
+ default 0x0 if OR0_CHT_ONE_HALF_CLOCK
+ default 0x80 if OR0_CHT_TWO_CLOCK
+
+config OR0_RST
+ hex
+ default 0x0 if !BR0_MACHINE_FCM
+ default 0x0 if OR0_RST_THREE_QUARTER_CLOCK
+ default 0x8 if OR0_RST_ONE_CLOCK
+ default 0x0 if OR0_RST_ONE_HALF_CLOCK
+
+config OR0_CSNT
+ hex
+ default 0x0 if !BR0_MACHINE_GPCM
+ default 0x0 if OR0_CSNT_NORMAL
+ default 0x800 if OR0_CSNT_EARLIER
+
+config OR0_ACS
+ hex
+ default 0x0 if !BR0_MACHINE_GPCM
+ default 0x0 if OR0_ACS_SAME_TIME
+ default 0x400 if OR0_ACS_QUARTER_CYCLE_EARLIER
+ default 0x600 if OR0_ACS_HALF_CYCLE_EARLIER
+
+config OR0_XACS
+ hex
+ default 0x0 if !BR0_MACHINE_GPCM
+ default 0x0 if OR0_XACS_NORMAL
+ default 0x100 if OR0_XACS_EXTENDED
+
+config OR0_SETA
+ hex
+ default 0x0 if !BR0_MACHINE_GPCM
+ default 0x0 if OR0_SETA_INTERNAL
+ default 0x8 if OR0_SETA_EXTERNAL
+
+config OR0_TRLX
+ hex
+ default 0x0 if OR0_TRLX_NORMAL
+ default 0x4 if OR0_TRLX_RELAXED
+
+config OR0_EHTR
+ hex
+ default 0x0 if OR0_EHTR_NORMAL
+ default 0x2 if OR0_EHTR_1_CYCLE
+ default 0x0 if OR0_EHTR_4_CYCLE
+ default 0x2 if OR0_EHTR_8_CYCLE
+
+config OR0_EAD
+ hex
+ default 0x0 if ARCH_MPC8308
+ default 0x0 if OR0_EAD_NONE
+ default 0x1 if OR0_EAD_EXTRA