SPEAr : Network driver support added
Designware network driver support added.
This is a Synopsys ethernet controller
Signed-off-by: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
diff --git a/doc/README.designware_eth b/doc/README.designware_eth
new file mode 100644
index 0000000..25ec6bd
--- /dev/null
+++ b/doc/README.designware_eth
@@ -0,0 +1,25 @@
+This driver supports Designware Ethernet Controller provided by Synopsis.
+
+The driver is enabled by CONFIG_DESIGNWARE_ETH.
+
+The driver has been developed and tested on SPEAr platforms. By default, the
+MDIO interface works at 100/Full. #defining the below options in board
+configuration file changes this behavior.
+
+Call an subroutine from respective board/.../board.c
+designware_initialize(u32 id, ulong base_addr, u32 phy_addr);
+
+The various options suported by the driver are
+1. CONFIG_DW_ALTDESCRIPTOR
+ Define this to use the Alternate/Enhanced Descriptor configurations.
+1. CONFIG_DW_AUTONEG
+ Define this to autonegotiate with the host before proceeding with mac
+ level configuration. This obviates the definitions of CONFIG_DW_SPEED10M
+ and CONFIG_DW_DUPLEXHALF.
+2. CONFIG_DW_SPEED10M
+ Define this to change the default behavior from 100Mbps to 10Mbps.
+3. CONFIG_DW_DUPLEXHALF
+ Define this to change the default behavior from Full Duplex to Half.
+4. CONFIG_DW_SEARCH_PHY
+ Define this to search the phy address. This would overwrite the value
+ passed as 3rd arg from designware_initialize routine.
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index b75c02f..7a320fd 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -34,6 +34,7 @@
COBJS-$(CONFIG_BFIN_MAC) += bfin_mac.o
COBJS-$(CONFIG_CS8900) += cs8900.o
COBJS-$(CONFIG_TULIP) += dc2114x.o
+COBJS-$(CONFIG_DESIGNWARE_ETH) += designware.o
COBJS-$(CONFIG_DRIVER_DM9000) += dm9000x.o
COBJS-$(CONFIG_DNET) += dnet.o
COBJS-$(CONFIG_E1000) += e1000.o
diff --git a/drivers/net/designware.c b/drivers/net/designware.c
new file mode 100644
index 0000000..d0d9827
--- /dev/null
+++ b/drivers/net/designware.c
@@ -0,0 +1,531 @@
+/*
+ * (C) Copyright 2010
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Designware ethernet IP driver for u-boot
+ */
+
+#include <common.h>
+#include <miiphy.h>
+#include <malloc.h>
+#include <linux/err.h>
+#include <asm/io.h>
+#include "designware.h"
+
+static void tx_descs_init(struct eth_device *dev)
+{
+ struct dw_eth_dev *priv = dev->priv;
+ struct eth_dma_regs *dma_p = priv->dma_regs_p;
+ struct dmamacdescr *desc_table_p = &priv->tx_mac_descrtable[0];
+ char *txbuffs = &priv->txbuffs[0];
+ struct dmamacdescr *desc_p;
+ u32 idx;
+
+ for (idx = 0; idx < CONFIG_TX_DESCR_NUM; idx++) {
+ desc_p = &desc_table_p[idx];
+ desc_p->dmamac_addr = &txbuffs[idx * CONFIG_ETH_BUFSIZE];
+ desc_p->dmamac_next = &desc_table_p[idx + 1];
+
+#if defined(CONFIG_DW_ALTDESCRIPTOR)
+ desc_p->txrx_status &= ~(DESC_TXSTS_TXINT | DESC_TXSTS_TXLAST |
+ DESC_TXSTS_TXFIRST | DESC_TXSTS_TXCRCDIS | \
+ DESC_TXSTS_TXCHECKINSCTRL | \
+ DESC_TXSTS_TXRINGEND | DESC_TXSTS_TXPADDIS);
+
+ desc_p->txrx_status |= DESC_TXSTS_TXCHAIN;
+ desc_p->dmamac_cntl = 0;
+ desc_p->txrx_status &= ~(DESC_TXSTS_MSK | DESC_TXSTS_OWNBYDMA);
+#else
+ desc_p->dmamac_cntl = DESC_TXCTRL_TXCHAIN;
+ desc_p->txrx_status = 0;
+#endif
+ }
+
+ /* Correcting the last pointer of the chain */
+ desc_p->dmamac_next = &desc_table_p[0];
+
+ writel((ulong)&desc_table_p[0], &dma_p->txdesclistaddr);
+}
+
+static void rx_descs_init(struct eth_device *dev)
+{
+ struct dw_eth_dev *priv = dev->priv;
+ struct eth_dma_regs *dma_p = priv->dma_regs_p;
+ struct dmamacdescr *desc_table_p = &priv->rx_mac_descrtable[0];
+ char *rxbuffs = &priv->rxbuffs[0];
+ struct dmamacdescr *desc_p;
+ u32 idx;
+
+ for (idx = 0; idx < CONFIG_RX_DESCR_NUM; idx++) {
+ desc_p = &desc_table_p[idx];
+ desc_p->dmamac_addr = &rxbuffs[idx * CONFIG_ETH_BUFSIZE];
+ desc_p->dmamac_next = &desc_table_p[idx + 1];
+
+ desc_p->dmamac_cntl =
+ (MAC_MAX_FRAME_SZ & DESC_RXCTRL_SIZE1MASK) | \
+ DESC_RXCTRL_RXCHAIN;
+
+ desc_p->txrx_status = DESC_RXSTS_OWNBYDMA;
+ }
+
+ /* Correcting the last pointer of the chain */
+ desc_p->dmamac_next = &desc_table_p[0];
+
+ writel((ulong)&desc_table_p[0], &dma_p->rxdesclistaddr);
+}
+
+static void descs_init(struct eth_device *dev)
+{
+ tx_descs_init(dev);
+ rx_descs_init(dev);
+}
+
+static int mac_reset(struct eth_device *dev)
+{
+ struct dw_eth_dev *priv = dev->priv;
+ struct eth_mac_regs *mac_p = priv->mac_regs_p;
+ struct eth_dma_regs *dma_p = priv->dma_regs_p;
+
+ int timeout = CONFIG_MACRESET_TIMEOUT;
+
+ writel(DMAMAC_SRST, &dma_p->busmode);
+ writel(MII_PORTSELECT, &mac_p->conf);
+
+ do {
+ if (!(readl(&dma_p->busmode) & DMAMAC_SRST))
+ return 0;
+ udelay(1000);
+ } while (timeout--);
+
+ return -1;
+}
+
+static int dw_write_hwaddr(struct eth_device *dev)
+{
+ struct dw_eth_dev *priv = dev->priv;
+ struct eth_mac_regs *mac_p = priv->mac_regs_p;
+ u32 macid_lo, macid_hi;
+ u8 *mac_id = &dev->enetaddr[0];
+
+ macid_lo = mac_id[0] + (mac_id[1] << 8) + \
+ (mac_id[2] << 16) + (mac_id[3] << 24);
+ macid_hi = mac_id[4] + (mac_id[5] << 8);
+
+ writel(macid_hi, &mac_p->macaddr0hi);
+ writel(macid_lo, &mac_p->macaddr0lo);
+
+ return 0;
+}
+
+static int dw_eth_init(struct eth_device *dev, bd_t *bis)
+{
+ struct dw_eth_dev *priv = dev->priv;
+ struct eth_mac_regs *mac_p = priv->mac_regs_p;
+ struct eth_dma_regs *dma_p = priv->dma_regs_p;
+ u32 conf;
+
+ /* Reset ethernet hardware */
+ if (mac_reset(dev) < 0)
+ return -1;
+
+ writel(FIXEDBURST | PRIORXTX_41 | BURST_16,
+ &dma_p->busmode);
+
+ writel(FLUSHTXFIFO | readl(&dma_p->opmode), &dma_p->opmode);
+ writel(STOREFORWARD | TXSECONDFRAME, &dma_p->opmode);
+
+ conf = FRAMEBURSTENABLE | DISABLERXOWN;
+
+ if (priv->speed != SPEED_1000M)
+ conf |= MII_PORTSELECT;
+
+ if (priv->duplex == FULL_DUPLEX)
+ conf |= FULLDPLXMODE;
+
+ writel(conf, &mac_p->conf);
+
+ descs_init(dev);
+
+ /*
+ * Start/Enable xfer at dma as well as mac level
+ */
+ writel(readl(&dma_p->opmode) | RXSTART, &dma_p->opmode);
+ writel(readl(&dma_p->opmode) | TXSTART, &dma_p->opmode);
+
+ writel(readl(&mac_p->conf) | RXENABLE, &mac_p->conf);
+ writel(readl(&mac_p->conf) | TXENABLE, &mac_p->conf);
+
+ return 0;
+}
+
+static int dw_eth_send(struct eth_device *dev, volatile void *packet,
+ int length)
+{
+ struct dw_eth_dev *priv = dev->priv;
+ struct eth_dma_regs *dma_p = priv->dma_regs_p;
+ u32 desc_num = priv->tx_currdescnum;
+ struct dmamacdescr *desc_p = &priv->tx_mac_descrtable[desc_num];
+
+ /* Check if the descriptor is owned by CPU */
+ if (desc_p->txrx_status & DESC_TXSTS_OWNBYDMA) {
+ printf("CPU not owner of tx frame\n");
+ return -1;
+ }
+
+ memcpy((void *)desc_p->dmamac_addr, (void *)packet, length);
+
+#if defined(CONFIG_DW_ALTDESCRIPTOR)
+ desc_p->txrx_status |= DESC_TXSTS_TXFIRST | DESC_TXSTS_TXLAST;
+ desc_p->dmamac_cntl |= (length << DESC_TXCTRL_SIZE1SHFT) & \
+ DESC_TXCTRL_SIZE1MASK;
+
+ desc_p->txrx_status &= ~(DESC_TXSTS_MSK);
+ desc_p->txrx_status |= DESC_TXSTS_OWNBYDMA;
+#else
+ desc_p->dmamac_cntl |= ((length << DESC_TXCTRL_SIZE1SHFT) & \
+ DESC_TXCTRL_SIZE1MASK) | DESC_TXCTRL_TXLAST | \
+ DESC_TXCTRL_TXFIRST;
+
+ desc_p->txrx_status = DESC_TXSTS_OWNBYDMA;
+#endif
+
+ /* Test the wrap-around condition. */
+ if (++desc_num >= CONFIG_TX_DESCR_NUM)
+ desc_num = 0;
+
+ priv->tx_currdescnum = desc_num;
+
+ /* Start the transmission */
+ writel(POLL_DATA, &dma_p->txpolldemand);
+
+ return 0;
+}
+
+static int dw_eth_recv(struct eth_device *dev)
+{
+ struct dw_eth_dev *priv = dev->priv;
+ u32 desc_num = priv->rx_currdescnum;
+ struct dmamacdescr *desc_p = &priv->rx_mac_descrtable[desc_num];
+
+ u32 status = desc_p->txrx_status;
+ int length = 0;
+
+ /* Check if the owner is the CPU */
+ if (!(status & DESC_RXSTS_OWNBYDMA)) {
+
+ length = (status & DESC_RXSTS_FRMLENMSK) >> \
+ DESC_RXSTS_FRMLENSHFT;
+
+ NetReceive(desc_p->dmamac_addr, length);
+
+ /*
+ * Make the current descriptor valid again and go to
+ * the next one
+ */
+ desc_p->txrx_status |= DESC_RXSTS_OWNBYDMA;
+
+ /* Test the wrap-around condition. */
+ if (++desc_num >= CONFIG_RX_DESCR_NUM)
+ desc_num = 0;
+ }
+
+ priv->rx_currdescnum = desc_num;
+
+ return length;
+}
+
+static void dw_eth_halt(struct eth_device *dev)
+{
+ struct dw_eth_dev *priv = dev->priv;
+
+ mac_reset(dev);
+ priv->tx_currdescnum = priv->rx_currdescnum = 0;
+}
+
+static int eth_mdio_read(struct eth_device *dev, u8 addr, u8 reg, u16 *val)
+{
+ struct dw_eth_dev *priv = dev->priv;
+ struct eth_mac_regs *mac_p = priv->mac_regs_p;
+ u32 miiaddr;
+ int timeout = CONFIG_MDIO_TIMEOUT;
+
+ miiaddr = ((addr << MIIADDRSHIFT) & MII_ADDRMSK) | \
+ ((reg << MIIREGSHIFT) & MII_REGMSK);
+
+ writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr);
+
+ do {
+ if (!(readl(&mac_p->miiaddr) & MII_BUSY)) {
+ *val = readl(&mac_p->miidata);
+ return 0;
+ }
+ udelay(1000);
+ } while (timeout--);
+
+ return -1;
+}
+
+static int eth_mdio_write(struct eth_device *dev, u8 addr, u8 reg, u16 val)
+{
+ struct dw_eth_dev *priv = dev->priv;
+ struct eth_mac_regs *mac_p = priv->mac_regs_p;
+ u32 miiaddr;
+ int ret = -1, timeout = CONFIG_MDIO_TIMEOUT;
+ u16 value;
+
+ writel(val, &mac_p->miidata);
+ miiaddr = ((addr << MIIADDRSHIFT) & MII_ADDRMSK) | \
+ ((reg << MIIREGSHIFT) & MII_REGMSK) | MII_WRITE;
+
+ writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr);
+
+ do {
+ if (!(readl(&mac_p->miiaddr) & MII_BUSY))
+ ret = 0;
+ udelay(1000);
+ } while (timeout--);
+
+ /* Needed as a fix for ST-Phy */
+ eth_mdio_read(dev, addr, reg, &value);
+
+ return ret;
+}
+
+#if defined(CONFIG_DW_SEARCH_PHY)
+static int find_phy(struct eth_device *dev)
+{
+ int phy_addr = 0;
+ u16 ctrl, oldctrl;
+
+ do {
+ eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl);
+ oldctrl = ctrl & PHY_BMCR_AUTON;
+
+ ctrl ^= PHY_BMCR_AUTON;
+ eth_mdio_write(dev, phy_addr, PHY_BMCR, ctrl);
+ eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl);
+ ctrl &= PHY_BMCR_AUTON;
+
+ if (ctrl == oldctrl) {
+ phy_addr++;
+ } else {
+ ctrl ^= PHY_BMCR_AUTON;
+ eth_mdio_write(dev, phy_addr, PHY_BMCR, ctrl);
+
+ return phy_addr;
+ }
+ } while (phy_addr < 32);
+
+ return -1;
+}
+#endif
+
+static int dw_reset_phy(struct eth_device *dev)
+{
+ struct dw_eth_dev *priv = dev->priv;
+ u16 ctrl;
+ int timeout = CONFIG_PHYRESET_TIMEOUT;
+ u32 phy_addr = priv->address;
+
+ eth_mdio_write(dev, phy_addr, PHY_BMCR, PHY_BMCR_RESET);
+ do {
+ eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl);
+ if (!(ctrl & PHY_BMCR_RESET))
+ break;
+ udelay(1000);
+ } while (timeout--);
+
+ if (timeout < 0)
+ return -1;
+
+#ifdef CONFIG_PHY_RESET_DELAY
+ udelay(CONFIG_PHY_RESET_DELAY);
+#endif
+ return 0;
+}
+
+static int configure_phy(struct eth_device *dev)
+{
+ struct dw_eth_dev *priv = dev->priv;
+ int phy_addr;
+ u16 bmcr, ctrl;
+#if defined(CONFIG_DW_AUTONEG)
+ u16 bmsr;
+ u32 timeout;
+ u16 anlpar, btsr;
+#endif
+
+#if defined(CONFIG_DW_SEARCH_PHY)
+ phy_addr = find_phy(dev);
+ if (phy_addr > 0)
+ priv->address = phy_addr;
+ else
+ return -1;
+#endif
+ if (dw_reset_phy(dev) < 0)
+ return -1;
+
+#if defined(CONFIG_DW_AUTONEG)
+ bmcr = PHY_BMCR_AUTON | PHY_BMCR_RST_NEG | PHY_BMCR_100MB | \
+ PHY_BMCR_DPLX | PHY_BMCR_1000_MBPS;
+#else
+ bmcr = PHY_BMCR_100MB | PHY_BMCR_DPLX;
+
+#if defined(CONFIG_DW_SPEED10M)
+ bmcr &= ~PHY_BMCR_100MB;
+#endif
+#if defined(CONFIG_DW_DUPLEXHALF)
+ bmcr &= ~PHY_BMCR_DPLX;
+#endif
+#endif
+ if (eth_mdio_write(dev, phy_addr, PHY_BMCR, bmcr) < 0)
+ return -1;
+
+ /* Read the phy status register and populate priv structure */
+#if defined(CONFIG_DW_AUTONEG)
+ timeout = CONFIG_AUTONEG_TIMEOUT;
+ do {
+ eth_mdio_read(dev, phy_addr, PHY_BMSR, &bmsr);
+ if (bmsr & PHY_BMSR_AUTN_COMP)
+ break;
+ udelay(1000);
+ } while (timeout--);
+
+ eth_mdio_read(dev, phy_addr, PHY_ANLPAR, &anlpar);
+ eth_mdio_read(dev, phy_addr, PHY_1000BTSR, &btsr);
+
+ if (btsr & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) {
+ priv->speed = SPEED_1000M;
+ if (btsr & PHY_1000BTSR_1000FD)
+ priv->duplex = FULL_DUPLEX;
+ else
+ priv->duplex = HALF_DUPLEX;
+ } else {
+ if (anlpar & PHY_ANLPAR_100)
+ priv->speed = SPEED_100M;
+ else
+ priv->speed = SPEED_10M;
+
+ if (anlpar & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD))
+ priv->duplex = FULL_DUPLEX;
+ else
+ priv->duplex = HALF_DUPLEX;
+ }
+#else
+ if (eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl) < 0)
+ return -1;
+
+ if (ctrl & PHY_BMCR_DPLX)
+ priv->duplex = FULL_DUPLEX;
+ else
+ priv->duplex = HALF_DUPLEX;
+
+ if (ctrl & PHY_BMCR_1000_MBPS)
+ priv->speed = SPEED_1000M;
+ else if (ctrl & PHY_BMCR_100_MBPS)
+ priv->speed = SPEED_100M;
+ else
+ priv->speed = SPEED_10M;
+#endif
+ return 0;
+}
+
+#if defined(CONFIG_MII)
+static int dw_mii_read(char *devname, u8 addr, u8 reg, u16 *val)
+{
+ struct eth_device *dev;
+
+ dev = eth_get_dev_by_name(devname);
+ if (dev)
+ eth_mdio_read(dev, addr, reg, val);
+
+ return 0;
+}
+
+static int dw_mii_write(char *devname, u8 addr, u8 reg, u16 val)
+{
+ struct eth_device *dev;
+
+ dev = eth_get_dev_by_name(devname);
+ if (dev)
+ eth_mdio_write(dev, addr, reg, val);
+
+ return 0;
+}
+#endif
+
+int designware_initialize(u32 id, ulong base_addr, u32 phy_addr)
+{
+ struct eth_device *dev;
+ struct dw_eth_dev *priv;
+
+ dev = (struct eth_device *) malloc(sizeof(struct eth_device));
+ if (!dev)
+ return -ENOMEM;
+
+ /*
+ * Since the priv structure contains the descriptors which need a strict
+ * buswidth alignment, memalign is used to allocate memory
+ */
+ priv = (struct dw_eth_dev *) memalign(16, sizeof(struct dw_eth_dev));
+ if (!priv) {
+ free(dev);
+ return -ENOMEM;
+ }
+
+ memset(dev, 0, sizeof(struct eth_device));
+ memset(priv, 0, sizeof(struct dw_eth_dev));
+
+ sprintf(dev->name, "mii%d", id);
+ dev->iobase = (int)base_addr;
+ dev->priv = priv;
+
+ eth_getenv_enetaddr_by_index(id, &dev->enetaddr[0]);
+
+ priv->dev = dev;
+ priv->mac_regs_p = (struct eth_mac_regs *)base_addr;
+ priv->dma_regs_p = (struct eth_dma_regs *)(base_addr +
+ DW_DMA_BASE_OFFSET);
+ priv->address = phy_addr;
+
+ if (mac_reset(dev) < 0)
+ return -1;
+
+ if (configure_phy(dev) < 0) {
+ printf("Phy could not be configured\n");
+ return -1;
+ }
+
+ dev->init = dw_eth_init;
+ dev->send = dw_eth_send;
+ dev->recv = dw_eth_recv;
+ dev->halt = dw_eth_halt;
+ dev->write_hwaddr = dw_write_hwaddr;
+
+ eth_register(dev);
+
+#if defined(CONFIG_MII)
+ miiphy_register(dev->name, dw_mii_read, dw_mii_write);
+#endif
+ return 1;
+}
diff --git a/drivers/net/designware.h b/drivers/net/designware.h
new file mode 100644
index 0000000..e5828a6
--- /dev/null
+++ b/drivers/net/designware.h
@@ -0,0 +1,264 @@
+/*
+ * (C) Copyright 2010
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _DW_ETH_H
+#define _DW_ETH_H
+
+#define CONFIG_TX_DESCR_NUM 16
+#define CONFIG_RX_DESCR_NUM 16
+#define CONFIG_ETH_BUFSIZE 2048
+#define TX_TOTAL_BUFSIZE (CONFIG_ETH_BUFSIZE * CONFIG_TX_DESCR_NUM)
+#define RX_TOTAL_BUFSIZE (CONFIG_ETH_BUFSIZE * CONFIG_RX_DESCR_NUM)
+
+#define CONFIG_MACRESET_TIMEOUT (3 * CONFIG_SYS_HZ)
+#define CONFIG_MDIO_TIMEOUT (3 * CONFIG_SYS_HZ)
+#define CONFIG_PHYRESET_TIMEOUT (3 * CONFIG_SYS_HZ)
+#define CONFIG_AUTONEG_TIMEOUT (5 * CONFIG_SYS_HZ)
+
+struct eth_mac_regs {
+ u32 conf; /* 0x00 */
+ u32 framefilt; /* 0x04 */
+ u32 hashtablehigh; /* 0x08 */
+ u32 hashtablelow; /* 0x0c */
+ u32 miiaddr; /* 0x10 */
+ u32 miidata; /* 0x14 */
+ u32 flowcontrol; /* 0x18 */
+ u32 vlantag; /* 0x1c */
+ u32 version; /* 0x20 */
+ u8 reserved_1[20];
+ u32 intreg; /* 0x38 */
+ u32 intmask; /* 0x3c */
+ u32 macaddr0hi; /* 0x40 */
+ u32 macaddr0lo; /* 0x44 */
+};
+
+/* MAC configuration register definitions */
+#define FRAMEBURSTENABLE (1 << 21)
+#define MII_PORTSELECT (1 << 15)
+#define FES_100 (1 << 14)
+#define DISABLERXOWN (1 << 13)
+#define FULLDPLXMODE (1 << 11)
+#define RXENABLE (1 << 2)
+#define TXENABLE (1 << 3)
+
+/* MII address register definitions */
+#define MII_BUSY (1 << 0)
+#define MII_WRITE (1 << 1)
+#define MII_CLKRANGE_60_100M (0)
+#define MII_CLKRANGE_100_150M (0x4)
+#define MII_CLKRANGE_20_35M (0x8)
+#define MII_CLKRANGE_35_60M (0xC)
+#define MII_CLKRANGE_150_250M (0x10)
+#define MII_CLKRANGE_250_300M (0x14)
+
+#define MIIADDRSHIFT (11)
+#define MIIREGSHIFT (6)
+#define MII_REGMSK (0x1F << 6)
+#define MII_ADDRMSK (0x1F << 11)
+
+
+struct eth_dma_regs {
+ u32 busmode; /* 0x00 */
+ u32 txpolldemand; /* 0x04 */
+ u32 rxpolldemand; /* 0x08 */
+ u32 rxdesclistaddr; /* 0x0c */
+ u32 txdesclistaddr; /* 0x10 */
+ u32 status; /* 0x14 */
+ u32 opmode; /* 0x18 */
+ u32 intenable; /* 0x1c */
+ u8 reserved[40];
+ u32 currhosttxdesc; /* 0x48 */
+ u32 currhostrxdesc; /* 0x4c */
+ u32 currhosttxbuffaddr; /* 0x50 */
+ u32 currhostrxbuffaddr; /* 0x54 */
+};
+
+#define DW_DMA_BASE_OFFSET (0x1000)
+
+/* Bus mode register definitions */
+#define FIXEDBURST (1 << 16)
+#define PRIORXTX_41 (3 << 14)
+#define PRIORXTX_31 (2 << 14)
+#define PRIORXTX_21 (1 << 14)
+#define PRIORXTX_11 (0 << 14)
+#define BURST_1 (1 << 8)
+#define BURST_2 (2 << 8)
+#define BURST_4 (4 << 8)
+#define BURST_8 (8 << 8)
+#define BURST_16 (16 << 8)
+#define BURST_32 (32 << 8)
+#define RXHIGHPRIO (1 << 1)
+#define DMAMAC_SRST (1 << 0)
+
+/* Poll demand definitions */
+#define POLL_DATA (0xFFFFFFFF)
+
+/* Operation mode definitions */
+#define STOREFORWARD (1 << 21)
+#define FLUSHTXFIFO (1 << 20)
+#define TXSTART (1 << 13)
+#define TXSECONDFRAME (1 << 2)
+#define RXSTART (1 << 1)
+
+/* Descriptior related definitions */
+#define MAC_MAX_FRAME_SZ (2048)
+
+struct dmamacdescr {
+ u32 txrx_status;
+ u32 dmamac_cntl;
+ void *dmamac_addr;
+ struct dmamacdescr *dmamac_next;
+};
+
+/*
+ * txrx_status definitions
+ */
+
+/* tx status bits definitions */
+#if defined(CONFIG_DW_ALTDESCRIPTOR)
+
+#define DESC_TXSTS_OWNBYDMA (1 << 31)
+#define DESC_TXSTS_TXINT (1 << 30)
+#define DESC_TXSTS_TXLAST (1 << 29)
+#define DESC_TXSTS_TXFIRST (1 << 28)
+#define DESC_TXSTS_TXCRCDIS (1 << 27)
+
+#define DESC_TXSTS_TXPADDIS (1 << 26)
+#define DESC_TXSTS_TXCHECKINSCTRL (3 << 22)
+#define DESC_TXSTS_TXRINGEND (1 << 21)
+#define DESC_TXSTS_TXCHAIN (1 << 20)
+#define DESC_TXSTS_MSK (0x1FFFF << 0)
+
+#else
+
+#define DESC_TXSTS_OWNBYDMA (1 << 31)
+#define DESC_TXSTS_MSK (0x1FFFF << 0)
+
+#endif
+
+/* rx status bits definitions */
+#define DESC_RXSTS_OWNBYDMA (1 << 31)
+#define DESC_RXSTS_DAFILTERFAIL (1 << 30)
+#define DESC_RXSTS_FRMLENMSK (0x3FFF << 16)
+#define DESC_RXSTS_FRMLENSHFT (16)
+
+#define DESC_RXSTS_ERROR (1 << 15)
+#define DESC_RXSTS_RXTRUNCATED (1 << 14)
+#define DESC_RXSTS_SAFILTERFAIL (1 << 13)
+#define DESC_RXSTS_RXIPC_GIANTFRAME (1 << 12)
+#define DESC_RXSTS_RXDAMAGED (1 << 11)
+#define DESC_RXSTS_RXVLANTAG (1 << 10)
+#define DESC_RXSTS_RXFIRST (1 << 9)
+#define DESC_RXSTS_RXLAST (1 << 8)
+#define DESC_RXSTS_RXIPC_GIANT (1 << 7)
+#define DESC_RXSTS_RXCOLLISION (1 << 6)
+#define DESC_RXSTS_RXFRAMEETHER (1 << 5)
+#define DESC_RXSTS_RXWATCHDOG (1 << 4)
+#define DESC_RXSTS_RXMIIERROR (1 << 3)
+#define DESC_RXSTS_RXDRIBBLING (1 << 2)
+#define DESC_RXSTS_RXCRC (1 << 1)
+
+/*
+ * dmamac_cntl definitions
+ */
+
+/* tx control bits definitions */
+#if defined(CONFIG_DW_ALTDESCRIPTOR)
+
+#define DESC_TXCTRL_SIZE1MASK (0x1FFF << 0)
+#define DESC_TXCTRL_SIZE1SHFT (0)
+#define DESC_TXCTRL_SIZE2MASK (0x1FFF << 16)
+#define DESC_TXCTRL_SIZE2SHFT (16)
+
+#else
+
+#define DESC_TXCTRL_TXINT (1 << 31)
+#define DESC_TXCTRL_TXLAST (1 << 30)
+#define DESC_TXCTRL_TXFIRST (1 << 29)
+#define DESC_TXCTRL_TXCHECKINSCTRL (3 << 27)
+#define DESC_TXCTRL_TXCRCDIS (1 << 26)
+#define DESC_TXCTRL_TXRINGEND (1 << 25)
+#define DESC_TXCTRL_TXCHAIN (1 << 24)
+
+#define DESC_TXCTRL_SIZE1MASK (0x7FF << 0)
+#define DESC_TXCTRL_SIZE1SHFT (0)
+#define DESC_TXCTRL_SIZE2MASK (0x7FF << 11)
+#define DESC_TXCTRL_SIZE2SHFT (11)
+
+#endif
+
+/* rx control bits definitions */
+#if defined(CONFIG_DW_ALTDESCRIPTOR)
+
+#define DESC_RXCTRL_RXINTDIS (1 << 31)
+#define DESC_RXCTRL_RXRINGEND (1 << 15)
+#define DESC_RXCTRL_RXCHAIN (1 << 14)
+
+#define DESC_RXCTRL_SIZE1MASK (0x1FFF << 0)
+#define DESC_RXCTRL_SIZE1SHFT (0)
+#define DESC_RXCTRL_SIZE2MASK (0x1FFF << 16)
+#define DESC_RXCTRL_SIZE2SHFT (16)
+
+#else
+
+#define DESC_RXCTRL_RXINTDIS (1 << 31)
+#define DESC_RXCTRL_RXRINGEND (1 << 25)
+#define DESC_RXCTRL_RXCHAIN (1 << 24)
+
+#define DESC_RXCTRL_SIZE1MASK (0x7FF << 0)
+#define DESC_RXCTRL_SIZE1SHFT (0)
+#define DESC_RXCTRL_SIZE2MASK (0x7FF << 11)
+#define DESC_RXCTRL_SIZE2SHFT (11)
+
+#endif
+
+struct dw_eth_dev {
+ u32 address;
+ u32 speed;
+ u32 duplex;
+ u32 tx_currdescnum;
+ u32 rx_currdescnum;
+ u32 padding;
+
+ struct dmamacdescr tx_mac_descrtable[CONFIG_TX_DESCR_NUM];
+ struct dmamacdescr rx_mac_descrtable[CONFIG_RX_DESCR_NUM];
+
+ char txbuffs[TX_TOTAL_BUFSIZE];
+ char rxbuffs[RX_TOTAL_BUFSIZE];
+
+ struct eth_mac_regs *mac_regs_p;
+ struct eth_dma_regs *dma_regs_p;
+
+ struct eth_device *dev;
+} __attribute__ ((aligned(8)));
+
+/* Speed specific definitions */
+#define SPEED_10M 1
+#define SPEED_100M 2
+#define SPEED_1000M 3
+
+/* Duplex mode specific definitions */
+#define HALF_DUPLEX 1
+#define FULL_DUPLEX 2
+
+#endif
diff --git a/include/netdev.h b/include/netdev.h
index 882642a..3abc944 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -49,6 +49,7 @@
int cs8900_initialize(u8 dev_num, int base_addr);
int dc21x4x_initialize(bd_t *bis);
int davinci_emac_initialize(void);
+int designware_initialize(u32 id, ulong base_addr, u32 phy_addr);
int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr);
int e1000_initialize(bd_t *bis);
int eepro100_initialize(bd_t *bis);