ARM: dts: renesas: Add RZ/A1 GR-Peach board
Add board code and DTs for Renesas RZ/A1 SoC-based GR-Peach,
which is a cheap development platform with RZ/A1H SoC. The
DTs are imported from Linux 5.0.11, commit d5a2675b207d .
Currently supported are UART, ethernet and RPC SPI. The board
can be booted from RPC SPI by writing the u-boot.bin binary
to the beginning of the SPI NOR, e.g. using the "sf" command.
The board can also be booted via JTAG by setting text base to
0x20020000, loading u-boot.bin there via JTAG and executing it
from that address.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Chris Brandt <chris.brandt@renesas.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
diff --git a/board/renesas/grpeach/Kconfig b/board/renesas/grpeach/Kconfig
new file mode 100644
index 0000000..00dc496
--- /dev/null
+++ b/board/renesas/grpeach/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_GRPEACH
+
+config SYS_BOARD
+ default "grpeach"
+
+config SYS_VENDOR
+ default "renesas"
+
+config SYS_CONFIG_NAME
+ default "grpeach"
+
+endif
diff --git a/board/renesas/grpeach/MAINTAINERS b/board/renesas/grpeach/MAINTAINERS
new file mode 100644
index 0000000..4ab7773
--- /dev/null
+++ b/board/renesas/grpeach/MAINTAINERS
@@ -0,0 +1,6 @@
+GRPEACH BOARD
+M: Marek Vasut <marek.vasut@gmail.com>
+S: Maintained
+F: board/renesas/grpeach/
+F: include/configs/grpeach.h
+F: configs/grpeach_defconfig
diff --git a/board/renesas/grpeach/Makefile b/board/renesas/grpeach/Makefile
new file mode 100644
index 0000000..48e185c
--- /dev/null
+++ b/board/renesas/grpeach/Makefile
@@ -0,0 +1,8 @@
+#
+# Copyright (C) 2017 Renesas Electronics
+# Copyright (C) 2017 Chris Brandt
+#
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-y := grpeach.o
+obj-y += lowlevel_init.o
diff --git a/board/renesas/grpeach/grpeach.c b/board/renesas/grpeach/grpeach.c
new file mode 100644
index 0000000..4f901ee
--- /dev/null
+++ b/board/renesas/grpeach/grpeach.c
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Renesas Electronics
+ * Copyright (C) Chris Brandt
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+
+#define RZA1_WDT_BASE 0xfcfe0000
+#define WTCSR 0x00
+#define WTCNT 0x02
+#define WRCSR 0x04
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+ gd->bd->bi_boot_params = (CONFIG_SYS_SDRAM_BASE + 0x100);
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ if (fdtdec_setup_mem_size_base() != 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+int dram_init_banksize(void)
+{
+ fdtdec_setup_memory_banksize();
+
+ return 0;
+}
+
+void reset_cpu(ulong addr)
+{
+ /* Dummy read (must read WRCSR:WOVF at least once before clearing) */
+ readb(RZA1_WDT_BASE + WRCSR);
+
+ writew(0xa500, RZA1_WDT_BASE + WRCSR);
+ writew(0x5a5f, RZA1_WDT_BASE + WRCSR);
+ writew(0x5a00, RZA1_WDT_BASE + WTCNT);
+ writew(0xa578, RZA1_WDT_BASE + WTCSR);
+
+ for (;;)
+ asm volatile("wfi");
+}
diff --git a/board/renesas/grpeach/lowlevel_init.S b/board/renesas/grpeach/lowlevel_init.S
new file mode 100644
index 0000000..9a66dfa
--- /dev/null
+++ b/board/renesas/grpeach/lowlevel_init.S
@@ -0,0 +1,107 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2017 Renesas Electronics
+ * Copyright (C) 2017 Chris Brandt
+ */
+#include <config.h>
+#include <version.h>
+#include <asm/macro.h>
+
+/* Watchdog Registers */
+#define RZA1_WDT_BASE 0xFCFE0000
+#define WTCSR (RZA1_WDT_BASE + 0x00) /* Watchdog Timer Control Register */
+#define WTCNT (RZA1_WDT_BASE + 0x02) /* Watchdog Timer Counter Register */
+#define WRCSR (RZA1_WDT_BASE + 0x04) /* Watchdog Reset Control Register */
+
+/* Standby controller registers (chapter 55) */
+#define RZA1_STBCR_BASE 0xFCFE0020
+#define STBCR1 (RZA1_STBCR_BASE + 0x00)
+#define STBCR2 (RZA1_STBCR_BASE + 0x04)
+#define STBCR3 (RZA1_STBCR_BASE + 0x400)
+#define STBCR4 (RZA1_STBCR_BASE + 0x404)
+#define STBCR5 (RZA1_STBCR_BASE + 0x408)
+#define STBCR6 (RZA1_STBCR_BASE + 0x40c)
+#define STBCR7 (RZA1_STBCR_BASE + 0x410)
+#define STBCR8 (RZA1_STBCR_BASE + 0x414)
+#define STBCR9 (RZA1_STBCR_BASE + 0x418)
+#define STBCR10 (RZA1_STBCR_BASE + 0x41c)
+#define STBCR11 (RZA1_STBCR_BASE + 0x420)
+#define STBCR12 (RZA1_STBCR_BASE + 0x424)
+#define STBCR13 (RZA1_STBCR_BASE + 0x450)
+
+/* Clock Registers */
+#define RZA1_FRQCR_BASE 0xFCFE0010
+#define FRQCR (RZA1_FRQCR_BASE + 0x00)
+#define FRQCR2 (RZA1_FRQCR_BASE + 0x04)
+
+#define SYSCR1 0xFCFE0400 /* System control register 1 */
+#define SYSCR2 0xFCFE0404 /* System control register 2 */
+#define SYSCR3 0xFCFE0408 /* System control register 3 */
+
+/* Disable WDT */
+#define WTCSR_D 0xA518
+#define WTCNT_D 0x5A00
+
+/* Enable all peripheral clocks */
+#define STBCR3_D 0x00000000
+#define STBCR4_D 0x00000000
+#define STBCR5_D 0x00000000
+#define STBCR6_D 0x00000000
+#define STBCR7_D 0x00000024
+#define STBCR8_D 0x00000005
+#define STBCR9_D 0x00000000
+#define STBCR10_D 0x00000000
+#define STBCR11_D 0x000000c0
+#define STBCR12_D 0x000000f0
+
+/*
+ * Set all system clocks to full speed.
+ * On reset, the CPU will be running at 1/2 speed.
+ * In the Hardware Manual, see Table 6.3 Settable Frequency Ranges
+ */
+#define FRQCR_D 0x0035
+#define FRQCR2_D 0x0001
+
+ .global lowlevel_init
+
+ .text
+ .align 2
+
+lowlevel_init:
+ /* PL310 init */
+ write32 0x3fffff80, 0x00000001
+
+ /* Disable WDT */
+ write16 WTCSR, WTCSR_D
+ write16 WTCNT, WTCNT_D
+
+ /* Set clocks */
+ write16 FRQCR, FRQCR_D
+ write16 FRQCR2, FRQCR2_D
+
+ /* Enable all peripherals(Standby Control) */
+ write8 STBCR3, STBCR3_D
+ write8 STBCR4, STBCR4_D
+ write8 STBCR5, STBCR5_D
+ write8 STBCR6, STBCR6_D
+ write8 STBCR7, STBCR7_D
+ write8 STBCR8, STBCR8_D
+ write8 STBCR9, STBCR9_D
+ write8 STBCR10, STBCR10_D
+ write8 STBCR11, STBCR11_D
+ write8 STBCR12, STBCR12_D
+
+ /* For serial booting, enable read ahead caching to speed things up */
+#define DRCR_0 0x3FEFA00C
+ write32 DRCR_0, 0x00010100 /* Read Burst ON, Length=2 */
+
+ /* Enable all internal RAM */
+ write8 SYSCR1, 0xFF
+ write8 SYSCR2, 0xFF
+ write8 SYSCR3, 0xFF
+
+ nop
+ /* back to arch calling code */
+ mov pc, lr
+
+ .align 4