* Patches by Jon Diekema, 15 Sep 2003:
  - add description for missing CFG_CMD_* entries in the README file
  - sacsng tweaks:
   include/configs/sacsng.h:
       + Support extra bootp options like: 2nd DNS and send hostname
       + Enabling ping and irq command
       + Adding defines for a bunch of misc configrabled options
         (patches for these options will be coming)
       + Adding watchdog support, but it isn't enabled yet.

   board/sacsng/sacsng.c:

       + Suppressing unneeded output when the quiet environment
	 is non-zero.
       + show_boot_progress() now accepts any negative number as a
	 failure code.
       + show_boot_progress() flashes the error code 5 times, and
         then resets the board to retry the boot from the top

* Patch by Gleb Natapov, 14 Sep 2003:
  enable watchdog support for all MPC824x boards that have a watchdog
diff --git a/README b/README
index e431c29..691140f 100644
--- a/README
+++ b/README
@@ -573,13 +573,18 @@
 		#define enables commands:
 		-------------------------
 		CFG_CMD_ASKENV	* ask for env variable
+		CFG_CMD_AUTOSCRIPT Autoscript Support
 		CFG_CMD_BDI	  bdinfo
 		CFG_CMD_BEDBUG	  Include BedBug Debugger
+		CFG_CMD_BMP     * BMP support
 		CFG_CMD_BOOTD	  bootd
 		CFG_CMD_CACHE	  icache, dcache
 		CFG_CMD_CONSOLE	  coninfo
 		CFG_CMD_DATE	* support for RTC, date/time...
 		CFG_CMD_DHCP	  DHCP support
+		CFG_CMD_DIAG    * Diagnostics
+		CFG_CMD_DOC     * Disk-On-Chip Support
+		CFG_CMD_DTT       Digital Therm and Thermostat 
 		CFG_CMD_ECHO	* echo arguments
 		CFG_CMD_EEPROM	* EEPROM read/write support
 		CFG_CMD_ELF	  bootelf, bootvx
@@ -589,27 +594,37 @@
 		CFG_CMD_FDOS	* Dos diskette Support
 		CFG_CMD_FLASH	  flinfo, erase, protect
 		CFG_CMD_FPGA	  FPGA device initialization support
+		CFG_CMD_HWFLOW  * RTS/CTS hw flow control
 		CFG_CMD_I2C	* I2C serial bus support
 		CFG_CMD_IDE	* IDE harddisk support
 		CFG_CMD_IMI	  iminfo
+		CFG_CMD_IMLS      List all found images
 		CFG_CMD_IMMAP	* IMMR dump support
 		CFG_CMD_IRQ	* irqinfo
+		CFG_CMD_JFFS2   * JFFS2 Support
 		CFG_CMD_KGDB	* kgdb
 		CFG_CMD_LOADB	  loadb
 		CFG_CMD_LOADS	  loads
 		CFG_CMD_MEMORY	  md, mm, nm, mw, cp, cmp, crc, base,
 				  loop, mtest
+		CFG_CMD_MISC      Misc functions like sleep etc
 		CFG_CMD_MMC	  MMC memory mapped support
 		CFG_CMD_MII	  MII utility commands
+		CFG_CMD_NAND    * NAND support
 		CFG_CMD_NET	  bootp, tftpboot, rarpboot
 		CFG_CMD_PCI	* pciinfo
 		CFG_CMD_PCMCIA	* PCMCIA support
+		CFG_CMD_PING    * send ICMP ECHO_REQUEST to network host
+		CFG_CMD_PORTIO    Port I/O
 		CFG_CMD_REGINFO * Register dump
 		CFG_CMD_RUN	  run command in env variable
+		CFG_CMD_SAVES     save S record dump
 		CFG_CMD_SCSI	* SCSI Support
+		CFG_CMD_SDRAM   * print SDRAM configuration information
 		CFG_CMD_SETGETDCR Support for DCR Register access (4xx only)
 		CFG_CMD_SPI	* SPI serial bus support
 		CFG_CMD_USB	* USB support
+		CFG_CMD_VFD     * VFD support (TRAB)
 		CFG_CMD_BSP	* Board SPecific functions
 		-----------------------------------------------
 		CFG_CMD_ALL	all