PXA: Voipac PXA270 Support
This patch adds support for the Voipac PXA270 board. The support includes:
- Ethernet
- USB
- MMC
- NOR Booting
- OneNAND Booting
- LCD
- HDD
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Scott Wood <scottwood@freescale.com>
diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h
new file mode 100644
index 0000000..6d02995
--- /dev/null
+++ b/include/configs/vpac270.h
@@ -0,0 +1,323 @@
+/*
+ * Voipac PXA270 configuration file
+ *
+ * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Board Configuration Options
+ */
+#define CONFIG_PXA27X 1 /* Marvell PXA270 CPU */
+#define CONFIG_VPAC270 1 /* Voipac PXA270 board */
+
+#undef BOARD_LATE_INIT
+#undef CONFIG_SKIP_RELOCATE_UBOOT
+#undef CONFIG_USE_IRQ
+#undef CONFIG_SKIP_LOWLEVEL_INIT
+
+/*
+ * Environment settings
+ */
+#define CONFIG_ENV_SIZE 0x4000
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE 128
+
+#define CONFIG_ENV_OVERWRITE /* override default environment */
+
+#define CONFIG_BOOTCOMMAND \
+ "if mmc init && fatload mmc 0 0xa4000000 uImage; then " \
+ "bootm 0xa4000000; " \
+ "fi; " \
+ "if usb reset && fatload usb 0 0xa4000000 uImage; then " \
+ "bootm 0xa4000000; " \
+ "fi; " \
+ "bootm 0x40000;"
+#define CONFIG_BOOTARGS "console=tty0 console=ttyS0,115200"
+#define CONFIG_TIMESTAMP
+#define CONFIG_BOOTDELAY 2 /* Autoboot delay */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+
+#define CONFIG_LZMA /* LZMA compression support */
+
+/*
+ * Serial Console Configuration
+ */
+#define CONFIG_PXA_SERIAL
+#define CONFIG_FFUART 1
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Bootloader Components Configuration
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_ENV
+#undef CONFIG_CMD_IMLS
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_USB
+#undef CONFIG_LCD
+#define CONFIG_CMD_IDE
+
+#ifdef CONFIG_ONENAND_U_BOOT
+#undef CONFIG_CMD_FLASH
+#define CONFIG_CMD_ONENAND
+#else
+#define CONFIG_CMD_FLASH
+#undef CONFIG_CMD_ONENAND
+#endif
+
+/*
+ * Networking Configuration
+ * chip on the Voipac PXA270 board
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+
+#define CONFIG_NET_MULTI 1
+#define CONFIG_DRIVER_DM9000 1
+#define CONFIG_DM9000_BASE 0x08000300 /* CS2 */
+#define DM9000_IO (CONFIG_DM9000_BASE)
+#define DM9000_DATA (CONFIG_DM9000_BASE + 4)
+#define CONFIG_NET_RETRY_COUNT 10
+
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#endif
+
+/*
+ * MMC Card Configuration
+ */
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_PXA_MMC
+#define CONFIG_SYS_MMC_BASE 0xF0000000
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
+/*
+ * KGDB
+ */
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * HUSH Shell Configuration
+ */
+#define CONFIG_SYS_HUSH_PARSER 1
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#ifdef CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */
+#else
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
+#endif
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+#define CONFIG_SYS_DEVICE_NULLDEV 1
+
+/*
+ * Clock Configuration
+ */
+#undef CONFIG_SYS_CLKS_IN_HZ
+#define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */
+#define CONFIG_SYS_CPUSPEED 0x190 /* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */
+
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128*1024) /* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
+#endif
+
+/*
+ * DRAM Map
+ */
+#define CONFIG_NR_DRAM_BANKS 2 /* We have 2 banks of DRAM */
+#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
+#define PHYS_SDRAM_2 0x80000000 /* SDRAM Bank #2 */
+#define PHYS_SDRAM_2_SIZE 0x08000000 /* 128 MB */
+
+#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */
+#define CONFIG_SYS_DRAM_SIZE 0x10000000 /* 256 MB DRAM */
+
+#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
+
+#define CONFIG_SYS_LOAD_ADDR (0x5c000000)
+
+/*
+ * NOR FLASH
+ */
+#if defined(CONFIG_CMD_FLASH) /* NOR */
+#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
+#define PHYS_FLASH_2 0x02000000 /* Flash Bank #2 */
+
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER 1
+
+#define CONFIG_SYS_MAX_FLASH_SECT (4 + 255)
+#define CONFIG_SYS_MAX_FLASH_BANKS 2
+#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2 }
+
+#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ)
+#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ)
+
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
+#define CONFIG_SYS_FLASH_PROTECTION 1
+
+#define CONFIG_ENV_IS_IN_FLASH 1
+
+#elif defined(CONFIG_CMD_ONENAND) /* OneNAND */
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_SYS_ONENAND_BASE 0x00000000
+#define CONFIG_ENV_IS_IN_ONENAND 1
+
+#else /* No flash */
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_SYS_ENV_IS_NOWHERE
+#endif
+
+#define CONFIG_SYS_MONITOR_BASE 0x000000
+#define CONFIG_SYS_MONITOR_LEN 0x40000
+
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_ENV_SECT_SIZE 0x40000
+#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
+
+/*
+ * IDE
+ */
+#ifdef CONFIG_CMD_IDE
+#define CONFIG_LBA48
+#undef CONFIG_IDE_LED
+#undef CONFIG_IDE_RESET
+
+#define CONFIG_SYS_IDE_MAXBUS 1
+#define CONFIG_SYS_IDE_MAXDEVICE 1
+
+#define CONFIG_SYS_ATA_BASE_ADDR 0x0c000000
+#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0
+
+#define CONFIG_SYS_ATA_DATA_OFFSET 0x120
+#define CONFIG_SYS_ATA_REG_OFFSET 0x120
+#define CONFIG_SYS_ATA_ALT_OFFSET 0x120
+
+#define CONFIG_SYS_ATA_STRIDE 2
+#endif
+
+/*
+ * GPIO settings
+ */
+#define CONFIG_SYS_GPSR0_VAL 0x01308800
+#define CONFIG_SYS_GPSR1_VAL 0x00cf0000
+#define CONFIG_SYS_GPSR2_VAL 0x922ac000
+#define CONFIG_SYS_GPSR3_VAL 0x0161e800
+
+#define CONFIG_SYS_GPCR0_VAL 0x00010000
+#define CONFIG_SYS_GPCR1_VAL 0x0
+#define CONFIG_SYS_GPCR2_VAL 0x0
+#define CONFIG_SYS_GPCR3_VAL 0x0
+
+#define CONFIG_SYS_GPDR0_VAL 0xcbb18800
+#define CONFIG_SYS_GPDR1_VAL 0xfccfa981
+#define CONFIG_SYS_GPDR2_VAL 0x922affff
+#define CONFIG_SYS_GPDR3_VAL 0x0161e904
+
+#define CONFIG_SYS_GAFR0_L_VAL 0x00100000
+#define CONFIG_SYS_GAFR0_U_VAL 0xa5da8510
+#define CONFIG_SYS_GAFR1_L_VAL 0x6992901a
+#define CONFIG_SYS_GAFR1_U_VAL 0xaaa5a0aa
+#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa
+#define CONFIG_SYS_GAFR2_U_VAL 0x4109a401
+#define CONFIG_SYS_GAFR3_L_VAL 0x54010310
+#define CONFIG_SYS_GAFR3_U_VAL 0x00025401
+
+#define CONFIG_SYS_PSSR_VAL 0x30
+
+/*
+ * Clock settings
+ */
+#define CONFIG_SYS_CKEN 0x00500240
+#define CONFIG_SYS_CCCR 0x02000290
+
+/*
+ * Memory settings
+ */
+#define CONFIG_SYS_MSC0_VAL 0x3ffc95fa
+#define CONFIG_SYS_MSC1_VAL 0x02ccf974
+#define CONFIG_SYS_MSC2_VAL 0x00000000
+#define CONFIG_SYS_MDCNFG_VAL 0x8ad30ad3
+#define CONFIG_SYS_MDREFR_VAL 0x201fe01e
+#define CONFIG_SYS_MDMRS_VAL 0x00000000
+#define CONFIG_SYS_FLYCNFG_VAL 0x00000000
+#define CONFIG_SYS_SXCNFG_VAL 0x40044004
+#define CONFIG_SYS_MEM_BUF_IMP 0x0f
+
+/*
+ * PCMCIA and CF Interfaces
+ */
+#define CONFIG_SYS_MECR_VAL 0x00000001
+#define CONFIG_SYS_MCMEM0_VAL 0x00014307
+#define CONFIG_SYS_MCMEM1_VAL 0x00014307
+#define CONFIG_SYS_MCATT0_VAL 0x0001c787
+#define CONFIG_SYS_MCATT1_VAL 0x0001c787
+#define CONFIG_SYS_MCIO0_VAL 0x0001430f
+#define CONFIG_SYS_MCIO1_VAL 0x0001430f
+
+/*
+ * LCD
+ */
+#ifdef CONFIG_LCD
+#define CONFIG_VOIPAC_LCD
+#endif
+
+/*
+ * USB
+ */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_SYS_USB_OHCI_BOARD_INIT
+#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
+#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x4C000000
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "vpac270"
+#define CONFIG_USB_STORAGE
+#endif
+
+#endif /* __CONFIG_H */