powerpc: P1020MBG: Separate from P1_P2_RDB_PC in Kconfig
Use TARGET_P1020MBG instead of sharing with TARGET_P1_P2_RDB_PC to
simplify Kconfig and other macros.
Remove macro CONFIG_P1020MBG.
Signed-off-by: York Sun <york.sun@nxp.com>
diff --git a/board/freescale/p1_p2_rdb_pc/Kconfig b/board/freescale/p1_p2_rdb_pc/Kconfig
index d3352d2..2c45560 100644
--- a/board/freescale/p1_p2_rdb_pc/Kconfig
+++ b/board/freescale/p1_p2_rdb_pc/Kconfig
@@ -1,4 +1,5 @@
-if TARGET_P1_P2_RDB_PC
+if TARGET_P1_P2_RDB_PC || \
+ TARGET_P1020MBG
config SYS_BOARD
default "p1_p2_rdb_pc"
diff --git a/board/freescale/p1_p2_rdb_pc/ddr.c b/board/freescale/p1_p2_rdb_pc/ddr.c
index 1f3793b..a121256 100644
--- a/board/freescale/p1_p2_rdb_pc/ddr.c
+++ b/board/freescale/p1_p2_rdb_pc/ddr.c
@@ -78,7 +78,7 @@
.refresh_rate_ps = 7800000,
.tfaw_ps = 30000,
};
-#elif (defined(CONFIG_P1020MBG) || defined(CONFIG_P1020RDB_PD))
+#elif (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_P1020RDB_PD))
/* Micron MT41J512M8_187E */
dimm_params_t ddr_raw_timing = {
.n_ranks = 2,
diff --git a/board/freescale/p1_p2_rdb_pc/tlb.c b/board/freescale/p1_p2_rdb_pc/tlb.c
index 1c0008b..d88c06f 100644
--- a/board/freescale/p1_p2_rdb_pc/tlb.c
+++ b/board/freescale/p1_p2_rdb_pc/tlb.c
@@ -85,13 +85,13 @@
MAS3_SX|MAS3_SW|MAS3_SR, 0,
0, 8, BOOKE_PAGESZ_1G, 1),
-#if defined(CONFIG_P1020MBG) || defined(CONFIG_P1020RDB_PD)
+#if defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_P1020RDB_PD)
/* 2G DDR on P1020MBG, map the second 1G */
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 9, BOOKE_PAGESZ_1G, 1),
-#endif /* P1020MBG */
+#endif /* TARGET_P1020MBG */
#endif /* RAMBOOT/SPL */
#ifdef CONFIG_SYS_INIT_L2_ADDR