arm64: zynqmp: Add support for SC revC
System controller revC is using ADI ethernet phy instead of TI because of
supply chain issues.
Describe reset assert and de-assert times to 10us and 5ms respectively
according to the datasheet. Also setup RGMII RX and TX delay values to
2400ps as per board bring up observations.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/2790f6cede7485556d581ab8270dda477fa21522.1695808407.git.michal.simek@amd.com
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 29c40d1..3cde86d 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -412,6 +412,7 @@
zynqmp-mini-nand.dtb \
zynqmp-mini-qspi.dtb \
zynqmp-sc-revB.dtb \
+ zynqmp-sc-revC.dtb \
zynqmp-sm-k24-revA.dtb \
zynqmp-smk-k24-revA.dtb \
zynqmp-sm-k26-revA.dtb \
diff --git a/arch/arm/dts/zynqmp-sc-revC.dts b/arch/arm/dts/zynqmp-sc-revC.dts
new file mode 100644
index 0000000..530a4a5
--- /dev/null
+++ b/arch/arm/dts/zynqmp-sc-revC.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP Generic System Controller
+ *
+ * Copyright (C) 2021 - 2022, Xilinx, Inc.
+ * Copyright (C) 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include "zynqmp-sc-revB.dts"
+
+/ {
+ model = "ZynqMP Generic System Controller";
+ compatible = "xlnx,zynqmp-sc-revC", "xlnx,zynqmp-sc", "xlnx,zynqmp";
+};
+
+&gem1 { /* gem1 MIO38-49, MDIO MIO50/51 */
+ /delete-node/ mdio;
+
+ mdio: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy0: ethernet-phy@1 { /* ADI1300 */
+ #phy-cells = <1>;
+ compatible = "ethernet-phy-id0283.bc30";
+ reg = <1>;
+ adi,rx-internal-delay-ps = <2400>;
+ adi,tx-internal-delay-ps = <2400>;
+ adi,fifo-depth-bits = <8>;
+ reset-gpios = <&gpio 77 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10>;
+ reset-deassert-us = <5000>;
+ };
+ };
+};