diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index b65e5ba..08c9ff8 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -21,4 +21,5 @@
 obj-$(CONFIG_FPGA_STRATIX_V) += stratixv.o
 obj-$(CONFIG_FPGA_SOCFPGA) += socfpga.o
 obj-$(CONFIG_TARGET_SOCFPGA_GEN5) += socfpga_gen5.o
+obj-$(CONFIG_TARGET_SOCFPGA_ARRIA10) += socfpga_arria10.o
 endif
diff --git a/drivers/fpga/socfpga_arria10.c b/drivers/fpga/socfpga_arria10.c
new file mode 100644
index 0000000..5c1a68a
--- /dev/null
+++ b/drivers/fpga/socfpga_arria10.c
@@ -0,0 +1,479 @@
+/*
+ * Copyright (C) 2017 Intel Corporation <www.intel.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0
+ */
+
+#include <asm/io.h>
+#include <asm/arch/fpga_manager.h>
+#include <asm/arch/reset_manager.h>
+#include <asm/arch/system_manager.h>
+#include <asm/arch/sdram.h>
+#include <asm/arch/misc.h>
+#include <altera.h>
+#include <common.h>
+#include <errno.h>
+#include <wait_bit.h>
+#include <watchdog.h>
+
+#define CFGWDTH_32	1
+#define MIN_BITSTREAM_SIZECHECK	230
+#define ENCRYPTION_OFFSET	69
+#define COMPRESSION_OFFSET	229
+#define FPGA_TIMEOUT_MSEC	1000  /* timeout in ms */
+#define FPGA_TIMEOUT_CNT	0x1000000
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const struct socfpga_fpga_manager *fpga_manager_base =
+		(void *)SOCFPGA_FPGAMGRREGS_ADDRESS;
+
+static const struct socfpga_system_manager *system_manager_base =
+		(void *)SOCFPGA_SYSMGR_ADDRESS;
+
+static void fpgamgr_set_cd_ratio(unsigned long ratio);
+
+static uint32_t fpgamgr_get_msel(void)
+{
+	u32 reg;
+
+	reg = readl(&fpga_manager_base->imgcfg_stat);
+	reg = (reg & ALT_FPGAMGR_IMGCFG_STAT_F2S_MSEL_SET_MSD) >>
+		ALT_FPGAMGR_IMGCFG_STAT_F2S_MSEL0_LSB;
+
+	return reg;
+}
+
+static void fpgamgr_set_cfgwdth(int width)
+{
+	if (width)
+		setbits_le32(&fpga_manager_base->imgcfg_ctrl_02,
+			ALT_FPGAMGR_IMGCFG_CTL_02_CFGWIDTH_SET_MSK);
+	else
+		clrbits_le32(&fpga_manager_base->imgcfg_ctrl_02,
+			ALT_FPGAMGR_IMGCFG_CTL_02_CFGWIDTH_SET_MSK);
+}
+
+int is_fpgamgr_user_mode(void)
+{
+	return (readl(&fpga_manager_base->imgcfg_stat) &
+		ALT_FPGAMGR_IMGCFG_STAT_F2S_USERMODE_SET_MSK) != 0;
+}
+
+static int wait_for_user_mode(void)
+{
+	return wait_for_bit(__func__,
+		&fpga_manager_base->imgcfg_stat,
+		ALT_FPGAMGR_IMGCFG_STAT_F2S_USERMODE_SET_MSK,
+		1, FPGA_TIMEOUT_MSEC, false);
+}
+
+static int is_fpgamgr_early_user_mode(void)
+{
+	return (readl(&fpga_manager_base->imgcfg_stat) &
+		ALT_FPGAMGR_IMGCFG_STAT_F2S_EARLY_USERMODE_SET_MSK) != 0;
+}
+
+int fpgamgr_wait_early_user_mode(void)
+{
+	u32 sync_data = 0xffffffff;
+	u32 i = 0;
+	unsigned start = get_timer(0);
+	unsigned long cd_ratio;
+
+	/* Getting existing CDRATIO */
+	cd_ratio = (readl(&fpga_manager_base->imgcfg_ctrl_02) &
+		ALT_FPGAMGR_IMGCFG_CTL_02_CDRATIO_SET_MSK) >>
+		ALT_FPGAMGR_IMGCFG_CTL_02_CDRATIO_LSB;
+
+	/* Using CDRATIO_X1 for better compatibility */
+	fpgamgr_set_cd_ratio(CDRATIO_x1);
+
+	while (!is_fpgamgr_early_user_mode()) {
+		if (get_timer(start) > FPGA_TIMEOUT_MSEC)
+			return -ETIMEDOUT;
+		fpgamgr_program_write((const long unsigned int *)&sync_data,
+				sizeof(sync_data));
+		udelay(FPGA_TIMEOUT_MSEC);
+		i++;
+	}
+
+	debug("Additional %i sync word needed\n", i);
+
+	/* restoring original CDRATIO */
+	fpgamgr_set_cd_ratio(cd_ratio);
+
+	return 0;
+}
+
+/* Read f2s_nconfig_pin and f2s_nstatus_pin; loop until de-asserted */
+static int wait_for_nconfig_pin_and_nstatus_pin(void)
+{
+	unsigned long mask = ALT_FPGAMGR_IMGCFG_STAT_F2S_NCONFIG_PIN_SET_MSK |
+				ALT_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN_SET_MSK;
+
+	/* Poll until f2s_nconfig_pin and f2s_nstatus_pin; loop until de-asserted,
+	 * timeout at 1000ms
+	 */
+	return wait_for_bit(__func__,
+			    &fpga_manager_base->imgcfg_stat,
+			    mask,
+			    false, FPGA_TIMEOUT_MSEC, false);
+}
+
+static int wait_for_f2s_nstatus_pin(unsigned long value)
+{
+	/* Poll until f2s to specific value, timeout at 1000ms */
+	return wait_for_bit(__func__,
+			    &fpga_manager_base->imgcfg_stat,
+			    ALT_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN_SET_MSK,
+			    value, FPGA_TIMEOUT_MSEC, false);
+}
+
+/* set CD ratio */
+static void fpgamgr_set_cd_ratio(unsigned long ratio)
+{
+	clrbits_le32(&fpga_manager_base->imgcfg_ctrl_02,
+		ALT_FPGAMGR_IMGCFG_CTL_02_CDRATIO_SET_MSK);
+
+	setbits_le32(&fpga_manager_base->imgcfg_ctrl_02,
+		(ratio << ALT_FPGAMGR_IMGCFG_CTL_02_CDRATIO_LSB) &
+		ALT_FPGAMGR_IMGCFG_CTL_02_CDRATIO_SET_MSK);
+}
+
+/* get the MSEL value, verify we are set for FPP configuration mode */
+static int fpgamgr_verify_msel(void)
+{
+	u32 msel = fpgamgr_get_msel();
+
+	if (msel & ~BIT(0)) {
+		printf("Fail: read msel=%d\n", msel);
+		return -EPERM;
+	}
+
+	return 0;
+}
+
+/*
+ * Write cdratio and cdwidth based on whether the bitstream is compressed
+ * and/or encoded
+ */
+static int fpgamgr_set_cdratio_cdwidth(unsigned int cfg_width, u32 *rbf_data,
+				       size_t rbf_size)
+{
+	unsigned int cd_ratio;
+	bool encrypt, compress;
+
+	/*
+         * According to the bitstream specification,
+	 * both encryption and compression status are
+         * in location before offset 230 of the buffer.
+         */
+	if (rbf_size < MIN_BITSTREAM_SIZECHECK)
+		return -EINVAL;
+
+	encrypt = (rbf_data[ENCRYPTION_OFFSET] >> 2) & 3;
+	encrypt = encrypt != 0;
+
+	compress = (rbf_data[COMPRESSION_OFFSET] >> 1) & 1;
+	compress = !compress;
+
+	debug("header word %d = %08x\n", 69, rbf_data[69]);
+	debug("header word %d = %08x\n", 229, rbf_data[229]);
+	debug("read from rbf header: encrypt=%d compress=%d\n", encrypt, compress);
+
+	/*
+	 * from the register map description of cdratio in imgcfg_ctrl_02:
+	 *  Normal Configuration    : 32bit Passive Parallel
+	 *  Partial Reconfiguration : 16bit Passive Parallel
+	 */
+
+	/*
+	 * cd ratio is dependent on cfg width and whether the bitstream
+	 * is encrypted and/or compressed.
+	 *
+	 * | width | encr. | compr. | cd ratio |
+	 * |  16   |   0   |   0    |     1    |
+	 * |  16   |   0   |   1    |     4    |
+	 * |  16   |   1   |   0    |     2    |
+	 * |  16   |   1   |   1    |     4    |
+	 * |  32   |   0   |   0    |     1    |
+	 * |  32   |   0   |   1    |     8    |
+	 * |  32   |   1   |   0    |     4    |
+	 * |  32   |   1   |   1    |     8    |
+	 */
+	if (!compress && !encrypt) {
+		cd_ratio = CDRATIO_x1;
+	} else {
+		if (compress)
+			cd_ratio = CDRATIO_x4;
+		else
+			cd_ratio = CDRATIO_x2;
+
+		/* if 32 bit, double the cd ratio (so register
+		   field setting is incremented) */
+		if (cfg_width == CFGWDTH_32)
+			cd_ratio += 1;
+	}
+
+	fpgamgr_set_cfgwdth(cfg_width);
+	fpgamgr_set_cd_ratio(cd_ratio);
+
+	return 0;
+}
+
+static int fpgamgr_reset(void)
+{
+	unsigned long reg;
+
+	/* S2F_NCONFIG = 0 */
+	clrbits_le32(&fpga_manager_base->imgcfg_ctrl_00,
+		ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NCONFIG_SET_MSK);
+
+	/* Wait for f2s_nstatus == 0 */
+	if (wait_for_f2s_nstatus_pin(0))
+		return -ETIME;
+
+	/* S2F_NCONFIG = 1 */
+	setbits_le32(&fpga_manager_base->imgcfg_ctrl_00,
+		ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NCONFIG_SET_MSK);
+
+	/* Wait for f2s_nstatus == 1 */
+	if (wait_for_f2s_nstatus_pin(1))
+		return -ETIME;
+
+	/* read and confirm f2s_condone_pin = 0 and f2s_condone_oe = 1 */
+	reg = readl(&fpga_manager_base->imgcfg_stat);
+	if ((reg & ALT_FPGAMGR_IMGCFG_STAT_F2S_CONDONE_PIN_SET_MSK) != 0)
+		return -EPERM;
+
+	if ((reg & ALT_FPGAMGR_IMGCFG_STAT_F2S_CONDONE_OE_SET_MSK) == 0)
+		return -EPERM;
+
+	return 0;
+}
+
+/* Start the FPGA programming by initialize the FPGA Manager */
+int fpgamgr_program_init(u32 * rbf_data, size_t rbf_size)
+{
+	int ret;
+
+	/* Step 1 */
+	if (fpgamgr_verify_msel())
+		return -EPERM;
+
+	/* Step 2 */
+	if (fpgamgr_set_cdratio_cdwidth(CFGWDTH_32, rbf_data, rbf_size))
+		return -EPERM;
+
+	/*
+	 * Step 3:
+	 * Make sure no other external devices are trying to interfere with
+	 * programming:
+	 */
+	if (wait_for_nconfig_pin_and_nstatus_pin())
+		return -ETIME;
+
+	/*
+	 * Step 4:
+	 * Deassert the signal drives from HPS
+	 *
+	 * S2F_NCE = 1
+	 * S2F_PR_REQUEST = 0
+	 * EN_CFG_CTRL = 0
+	 * EN_CFG_DATA = 0
+	 * S2F_NCONFIG = 1
+	 * S2F_NSTATUS_OE = 0
+	 * S2F_CONDONE_OE = 0
+	 */
+	setbits_le32(&fpga_manager_base->imgcfg_ctrl_01,
+		ALT_FPGAMGR_IMGCFG_CTL_01_S2F_NCE_SET_MSK);
+
+	clrbits_le32(&fpga_manager_base->imgcfg_ctrl_01,
+		ALT_FPGAMGR_IMGCFG_CTL_01_S2F_PR_REQUEST_SET_MSK);
+
+	clrbits_le32(&fpga_manager_base->imgcfg_ctrl_02,
+		ALT_FPGAMGR_IMGCFG_CTL_02_EN_CFG_DATA_SET_MSK |
+		ALT_FPGAMGR_IMGCFG_CTL_02_EN_CFG_CTRL_SET_MSK);
+
+	setbits_le32(&fpga_manager_base->imgcfg_ctrl_00,
+		ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NCONFIG_SET_MSK);
+
+	clrbits_le32(&fpga_manager_base->imgcfg_ctrl_00,
+		ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NSTATUS_OE_SET_MSK |
+		ALT_FPGAMGR_IMGCFG_CTL_00_S2F_CONDONE_OE_SET_MSK);
+
+	/*
+	 * Step 5:
+	 * Enable overrides
+	 * S2F_NENABLE_CONFIG = 0
+	 * S2F_NENABLE_NCONFIG = 0
+	 */
+	clrbits_le32(&fpga_manager_base->imgcfg_ctrl_01,
+		ALT_FPGAMGR_IMGCFG_CTL_01_S2F_NENABLE_CONFIG_SET_MSK);
+	clrbits_le32(&fpga_manager_base->imgcfg_ctrl_00,
+		ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_NCONFIG_SET_MSK);
+
+	/*
+	 * Disable driving signals that HPS doesn't need to drive.
+	 * S2F_NENABLE_NSTATUS = 1
+	 * S2F_NENABLE_CONDONE = 1
+	 */
+	setbits_le32(&fpga_manager_base->imgcfg_ctrl_00,
+		ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_NSTATUS_SET_MSK |
+		ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_CONDONE_SET_MSK);
+
+	/*
+	 * Step 6:
+	 * Drive chip select S2F_NCE = 0
+	 */
+	 clrbits_le32(&fpga_manager_base->imgcfg_ctrl_01,
+		ALT_FPGAMGR_IMGCFG_CTL_01_S2F_NCE_SET_MSK);
+
+	/* Step 7 */
+	if (wait_for_nconfig_pin_and_nstatus_pin())
+		return -ETIME;
+
+	/* Step 8 */
+	ret = fpgamgr_reset();
+
+	if (ret)
+		return ret;
+
+	/*
+	 * Step 9:
+	 * EN_CFG_CTRL and EN_CFG_DATA = 1
+	 */
+	setbits_le32(&fpga_manager_base->imgcfg_ctrl_02,
+		ALT_FPGAMGR_IMGCFG_CTL_02_EN_CFG_DATA_SET_MSK |
+		ALT_FPGAMGR_IMGCFG_CTL_02_EN_CFG_CTRL_SET_MSK);
+
+	return 0;
+}
+
+/* Ensure the FPGA entering config done */
+static int fpgamgr_program_poll_cd(void)
+{
+	unsigned long reg, i;
+
+	for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
+		reg = readl(&fpga_manager_base->imgcfg_stat);
+		if (reg & ALT_FPGAMGR_IMGCFG_STAT_F2S_CONDONE_PIN_SET_MSK)
+			return 0;
+
+		if ((reg & ALT_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN_SET_MSK) == 0) {
+			printf("nstatus == 0 while waiting for condone\n");
+			return -EPERM;
+		}
+	}
+
+	if (i == FPGA_TIMEOUT_CNT)
+		return -ETIME;
+
+	return 0;
+}
+
+/* Ensure the FPGA entering user mode */
+static int fpgamgr_program_poll_usermode(void)
+{
+	unsigned long reg;
+	int ret = 0;
+
+	if (fpgamgr_dclkcnt_set(0xf))
+		return -ETIME;
+
+	ret = wait_for_user_mode();
+	if (ret < 0) {
+		printf("%s: Failed to enter user mode with ", __func__);
+		printf("error code %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * Step 14:
+	 * Stop DATA path and Dclk
+	 * EN_CFG_CTRL and EN_CFG_DATA = 0
+	 */
+	clrbits_le32(&fpga_manager_base->imgcfg_ctrl_02,
+		ALT_FPGAMGR_IMGCFG_CTL_02_EN_CFG_DATA_SET_MSK |
+		ALT_FPGAMGR_IMGCFG_CTL_02_EN_CFG_CTRL_SET_MSK);
+
+	/*
+	 * Step 15:
+	 * Disable overrides
+	 * S2F_NENABLE_CONFIG = 1
+	 * S2F_NENABLE_NCONFIG = 1
+	 */
+	setbits_le32(&fpga_manager_base->imgcfg_ctrl_01,
+		ALT_FPGAMGR_IMGCFG_CTL_01_S2F_NENABLE_CONFIG_SET_MSK);
+	setbits_le32(&fpga_manager_base->imgcfg_ctrl_00,
+		ALT_FPGAMGR_IMGCFG_CTL_00_S2F_NENABLE_NCONFIG_SET_MSK);
+
+	/* Disable chip select S2F_NCE = 1 */
+	setbits_le32(&fpga_manager_base->imgcfg_ctrl_01,
+		ALT_FPGAMGR_IMGCFG_CTL_01_S2F_NCE_SET_MSK);
+
+	/*
+	 * Step 16:
+	 * Final check
+	 */
+	reg = readl(&fpga_manager_base->imgcfg_stat);
+	if (((reg & ALT_FPGAMGR_IMGCFG_STAT_F2S_USERMODE_SET_MSK) !=
+		ALT_FPGAMGR_IMGCFG_STAT_F2S_USERMODE_SET_MSK) ||
+	    ((reg & ALT_FPGAMGR_IMGCFG_STAT_F2S_CONDONE_PIN_SET_MSK) !=
+		ALT_FPGAMGR_IMGCFG_STAT_F2S_CONDONE_PIN_SET_MSK) ||
+	    ((reg & ALT_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN_SET_MSK) !=
+		ALT_FPGAMGR_IMGCFG_STAT_F2S_NSTATUS_PIN_SET_MSK))
+		return -EPERM;
+
+	return 0;
+}
+
+int fpgamgr_program_finish(void)
+{
+	/* Ensure the FPGA entering config done */
+	int status = fpgamgr_program_poll_cd();
+
+	if (status) {
+		printf("FPGA: Poll CD failed with error code %d\n", status);
+		return -EPERM;
+	}
+	WATCHDOG_RESET();
+
+	/* Ensure the FPGA entering user mode */
+	status = fpgamgr_program_poll_usermode();
+	if (status) {
+		printf("FPGA: Poll usermode failed with error code %d\n",
+			status);
+		return -EPERM;
+	}
+
+	printf("Full Configuration Succeeded.\n");
+
+	return 0;
+}
+
+/*
+ * FPGA Manager to program the FPGA. This is the interface used by FPGA driver.
+ * Return 0 for sucess, non-zero for error.
+ */
+int socfpga_load(Altera_desc *desc, const void *rbf_data, size_t rbf_size)
+{
+	unsigned long status;
+
+	/* disable all signals from hps peripheral controller to fpga */
+	writel(0, &system_manager_base->fpgaintf_en_global);
+
+	/* disable all axi bridge (hps2fpga, lwhps2fpga & fpga2hps) */
+	socfpga_bridges_reset();
+
+	/* Initialize the FPGA Manager */
+	status = fpgamgr_program_init((u32 *)rbf_data, rbf_size);
+	if (status)
+		return status;
+
+	/* Write the RBF data to FPGA Manager */
+	fpgamgr_program_write(rbf_data, rbf_size);
+
+	return fpgamgr_program_finish();
+}