MX: serial_mxc: cleanup removing nasty #ifdef
The serial driver for iMX SOCs is continuosly changed if a
new SOC or not yet used port is used. CONFIG_SYS_<SOC>_<UART Port>
defines were used only to find the base address for the selected UART.
Instead of that, move the base address to the board configuration
file and drop all #ifdef from driver.
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Marek Vasut <marek.vasut@gmail.com>
CC: Wolfgang Denk <wd@denx.de>
CC: Fabio Estevam <fabio.estevam@freescale.com>
CC: Helmut Raiger <helmut.raiger@hale.at>
CC: John Rigby <jcrigby@gmail.com>
CC: Matthias Weisser <weisserm@arcor.de>
CC: Jason Liu <jason.hui@linaro.org>
Acked-by: Jason Liu <jason.hui@linaro.org>
diff --git a/include/configs/efikamx.h b/include/configs/efikamx.h
index a07c8b5..2b069d6 100644
--- a/include/configs/efikamx.h
+++ b/include/configs/efikamx.h
@@ -85,7 +85,7 @@
* Hardware drivers
*/
#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX51_UART1
+#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
diff --git a/include/configs/flea3.h b/include/configs/flea3.h
index d88c578..20100c2 100644
--- a/include/configs/flea3.h
+++ b/include/configs/flea3.h
@@ -77,7 +77,7 @@
* UART (console)
*/
#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX35_UART3
+#define CONFIG_MXC_UART_BASE UART3_BASE
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h
index 6953a80..2af4e7a 100644
--- a/include/configs/imx27lite-common.h
+++ b/include/configs/imx27lite-common.h
@@ -102,7 +102,7 @@
* Serial Driver info
*/
#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX27_UART1
+#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
#define CONFIG_BAUDRATE 115200 /* Default baud rate */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h
index 1455ea2..bbcbce1 100644
--- a/include/configs/imx31_litekit.h
+++ b/include/configs/imx31_litekit.h
@@ -63,8 +63,8 @@
* Hardware drivers
*/
-#define CONFIG_MXC_UART 1
-#define CONFIG_SYS_MX31_UART1 1
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_MXC_GPIO
#define CONFIG_HARD_SPI 1
diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h
index 1b75197..3153eb5 100644
--- a/include/configs/imx31_phycore.h
+++ b/include/configs/imx31_phycore.h
@@ -59,7 +59,7 @@
#define CONFIG_SYS_I2C_SLAVE 0xfe
#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX31_UART1
+#define CONFIG_MXC_UART_BASE UART1_BASE
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h
index 8414376..d1ba02b 100644
--- a/include/configs/mx25pdk.h
+++ b/include/configs/mx25pdk.h
@@ -54,7 +54,7 @@
/* Serial Info */
#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX25_UART1
+#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
#define CONFIG_BAUDRATE 115200 /* Default baud rate */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h
index 7e011ae..87638a4 100644
--- a/include/configs/mx31ads.h
+++ b/include/configs/mx31ads.h
@@ -60,8 +60,8 @@
* Hardware drivers
*/
-#define CONFIG_MXC_UART 1
-#define CONFIG_SYS_MX31_UART1 1
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_HARD_SPI 1
#define CONFIG_MXC_SPI 1
diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h
index 4253c3e..4da6020 100644
--- a/include/configs/mx31pdk.h
+++ b/include/configs/mx31pdk.h
@@ -61,7 +61,7 @@
*/
#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX31_UART1
+#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_HW_WATCHDOG
#define CONFIG_MXC_GPIO
diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index 32ed609..0c62b9f 100644
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -85,7 +85,7 @@
* UART (console)
*/
#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX35_UART1
+#define CONFIG_MXC_UART_BASE UART1_BASE
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index 7c7544f..dd53f48 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -59,7 +59,7 @@
* Hardware drivers
*/
#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX51_UART1
+#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_MXC_GPIO
/*
diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h
index 15dfcb4..f48a41e 100644
--- a/include/configs/mx53ard.h
+++ b/include/configs/mx53ard.h
@@ -44,7 +44,7 @@
#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX53_UART1
+#define CONFIG_MXC_UART_BASE UART1_BASE
/* I2C Configs */
#define CONFIG_CMD_I2C
diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h
index 7c49136..11fe6ef 100644
--- a/include/configs/mx53evk.h
+++ b/include/configs/mx53evk.h
@@ -47,7 +47,7 @@
#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX53_UART1
+#define CONFIG_MXC_UART_BASE UART1_BASE
/* I2C Configs */
#define CONFIG_CMD_I2C
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index d699010..537649e 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -45,7 +45,7 @@
#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX53_UART1
+#define CONFIG_MXC_UART_BASE UART1_BASE
/* MMC Configs */
#define CONFIG_FSL_ESDHC
diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h
index 48b32dd..032f722 100644
--- a/include/configs/mx53smd.h
+++ b/include/configs/mx53smd.h
@@ -44,7 +44,7 @@
#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX53_UART1
+#define CONFIG_MXC_UART_BASE UART1_BASE
/* I2C Configs */
#define CONFIG_CMD_I2C
diff --git a/include/configs/qong.h b/include/configs/qong.h
index 3346802..3e36bb0 100644
--- a/include/configs/qong.h
+++ b/include/configs/qong.h
@@ -49,8 +49,8 @@
* Hardware drivers
*/
-#define CONFIG_MXC_UART 1
-#define CONFIG_SYS_MX31_UART1 1
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_MXC_GPIO
#define CONFIG_HW_WATCHDOG
diff --git a/include/configs/tt01.h b/include/configs/tt01.h
index 6ef25cd..a553712 100644
--- a/include/configs/tt01.h
+++ b/include/configs/tt01.h
@@ -148,7 +148,7 @@
* make sure that the transceiver is enabled during PL=1 for testing!
*/
#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX31_UART2
+#define CONFIG_MXC_UART_BASE UART2_BASE
#define CONFIG_MXC_SPI
#define CONFIG_MXC_GPIO
diff --git a/include/configs/tx25.h b/include/configs/tx25.h
index f77c546..87bd8a6 100644
--- a/include/configs/tx25.h
+++ b/include/configs/tx25.h
@@ -90,7 +90,7 @@
* Serial Info
*/
#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX25_UART1
+#define CONFIG_MXC_UART_BASE UART1_BASE
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
#define CONFIG_BAUDRATE 115200 /* Default baud rate */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
diff --git a/include/configs/vision2.h b/include/configs/vision2.h
index f321ad2..35b71f7 100644
--- a/include/configs/vision2.h
+++ b/include/configs/vision2.h
@@ -54,7 +54,7 @@
* Hardware drivers
*/
#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX51_UART3
+#define CONFIG_MXC_UART_BASE UART3_BASE
#define CONFIG_MXC_GPIO
#define CONFIG_MXC_SPI
#define CONFIG_HW_WATCHDOG
diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h
index 9a7a27a..599d5bb 100644
--- a/include/configs/zmx25.h
+++ b/include/configs/zmx25.h
@@ -66,7 +66,7 @@
* Serial
*/
#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX25_UART2
+#define CONFIG_MXC_UART_BASE UART2_BASE
#define CONFIG_CONS_INDEX 1 /* use UART2 for console */
#define CONFIG_BAUDRATE 115200 /* Default baud rate */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }