diff --git a/arch/arm/dts/armada-3720-turris-mox-u-boot.dtsi b/arch/arm/dts/armada-3720-turris-mox-u-boot.dtsi
index 28a36a6..71d5e70 100644
--- a/arch/arm/dts/armada-3720-turris-mox-u-boot.dtsi
+++ b/arch/arm/dts/armada-3720-turris-mox-u-boot.dtsi
@@ -3,25 +3,6 @@
  * 2022 by Marek Behún <kabel@kernel.org>
  */
 
-/ {
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		old_binding_phy1: ethernet-phy@1 {
-			reg = <1>;
-		};
-	};
-};
-
-&eth0 {
-	pinctrl-0 = <&rgmii_pins>, <&smi_pins>;
-	/delete-property/ phy-handle;
-	phy = <&old_binding_phy1>;
-};
-
-/delete-node/ &mdio;
-
 &usb3 {
 	vbus-supply = <&exp_usb3_vbus>;
 };
diff --git a/board/CZ.NIC/turris_mox/turris_mox.c b/board/CZ.NIC/turris_mox/turris_mox.c
index 9702d1f..a4738b3 100644
--- a/board/CZ.NIC/turris_mox/turris_mox.c
+++ b/board/CZ.NIC/turris_mox/turris_mox.c
@@ -13,6 +13,7 @@
 #include <button.h>
 #include <clk.h>
 #include <dm.h>
+#include <dm/of_extra.h>
 #include <env.h>
 #include <fdt_support.h>
 #include <init.h>
@@ -216,35 +217,35 @@
 #define SW_SMI_CMD_R(d, r)	(0x9800 | (((d) & 0x1f) << 5) | ((r) & 0x1f))
 #define SW_SMI_CMD_W(d, r)	(0x9400 | (((d) & 0x1f) << 5) | ((r) & 0x1f))
 
-static int sw_multi_read(struct mii_dev *bus, int sw, int dev, int reg)
+static int sw_multi_read(struct udevice *bus, int sw, int dev, int reg)
 {
-	bus->write(bus, sw, 0, 0, SW_SMI_CMD_R(dev, reg));
+	dm_mdio_write(bus, sw, MDIO_DEVAD_NONE, 0, SW_SMI_CMD_R(dev, reg));
 	mdelay(5);
-	return bus->read(bus, sw, 0, 1);
+	return dm_mdio_read(bus, sw, MDIO_DEVAD_NONE, 1);
 }
 
-static void sw_multi_write(struct mii_dev *bus, int sw, int dev, int reg,
+static void sw_multi_write(struct udevice *bus, int sw, int dev, int reg,
 			   u16 val)
 {
-	bus->write(bus, sw, 0, 1, val);
-	bus->write(bus, sw, 0, 0, SW_SMI_CMD_W(dev, reg));
+	dm_mdio_write(bus, sw, MDIO_DEVAD_NONE, 1, val);
+	dm_mdio_write(bus, sw, MDIO_DEVAD_NONE, 0, SW_SMI_CMD_W(dev, reg));
 	mdelay(5);
 }
 
-static int sw_scratch_read(struct mii_dev *bus, int sw, int reg)
+static int sw_scratch_read(struct udevice *bus, int sw, int reg)
 {
 	sw_multi_write(bus, sw, 0x1c, 0x1a, (reg & 0x7f) << 8);
 	return sw_multi_read(bus, sw, 0x1c, 0x1a) & 0xff;
 }
 
-static void sw_led_write(struct mii_dev *bus, int sw, int port, int reg,
+static void sw_led_write(struct udevice *bus, int sw, int port, int reg,
 			 u16 val)
 {
 	sw_multi_write(bus, sw, port, 0x16, 0x8000 | ((reg & 7) << 12)
 					    | (val & 0x7ff));
 }
 
-static void sw_blink_leds(struct mii_dev *bus, int peridot, int topaz)
+static void sw_blink_leds(struct udevice *bus, int peridot, int topaz)
 {
 	int i, p;
 	struct {
@@ -275,7 +276,7 @@
 	}
 }
 
-static void check_switch_address(struct mii_dev *bus, int addr)
+static void check_switch_address(struct udevice *bus, int addr)
 {
 	if (sw_scratch_read(bus, addr, 0x70) >> 3 != addr)
 		printf("Check of switch MDIO address failed for 0x%02x\n",
@@ -374,36 +375,22 @@
 static void mox_phy_leds_start_blinking(void)
 {
 	struct phy_device *phydev;
-	struct mii_dev *bus;
-	const char *node_name;
-	int node;
-
-	node = fdt_path_offset(gd->fdt_blob, "ethernet0");
-	if (node < 0) {
-		printf("Cannot get eth0!\n");
-		return;
-	}
+	ofnode phy_node;
 
-	node_name = fdt_get_name(gd->fdt_blob, node, NULL);
-	if (!node_name) {
-		printf("Cannot get eth0 node name!\n");
-		return;
-	}
-
-	bus = miiphy_get_dev_by_name(node_name);
-	if (!bus) {
-		printf("Cannot get MDIO bus device!\n");
-		return;
-	}
+	phy_node = ofnode_get_phy_node(ofnode_path("ethernet0"));
+	if (!ofnode_valid(phy_node))
+		goto err;
 
-	phydev = phy_find_by_mask(bus, BIT(1));
-	if (!phydev) {
-		printf("Cannot get ethernet PHY!\n");
-		return;
-	}
+	phydev = dm_phy_find_by_ofnode(phy_node);
+	if (!phydev)
+		goto err;
 
 	mox_phy_modify(phydev, 3, 0x12, 0x700, 0x400);
 	mox_phy_modify(phydev, 3, 0x10, 0xff, 0xbb);
+
+	return;
+err:
+	printf("Cannot get ethernet PHY!\n");
 }
 
 static bool read_reset_button(void)
@@ -611,6 +598,26 @@
 	return 0;
 }
 
+static struct udevice *mox_mdio_bus(void)
+{
+	struct udevice *bus;
+	ofnode node;
+
+	node = ofnode_by_compatible(ofnode_null(), "marvell,orion-mdio");
+	if (!ofnode_valid(node))
+		goto err;
+
+	dm_mdio_probe_devices();
+
+	if (uclass_get_device_by_ofnode(UCLASS_MDIO, node, &bus))
+		goto err;
+
+	return bus;
+err:
+	printf("Cannot get MDIO bus device!\n");
+	return NULL;
+}
+
 int last_stage_init(void)
 {
 	struct gpio_desc reset_gpio = {};
@@ -636,16 +643,9 @@
 	 * 0x70 of Peridot (and potentially Topaz) modules
 	 */
 	if (peridot || topaz) {
-		struct mii_dev *bus;
-		const char *node_name;
-		int node;
+		struct udevice *bus = mox_mdio_bus();
 
-		node = fdt_path_offset(gd->fdt_blob, "ethernet0");
-		node_name = (node >= 0) ? fdt_get_name(gd->fdt_blob, node, NULL) : NULL;
-		bus = node_name ? miiphy_get_dev_by_name(node_name) : NULL;
-		if (!bus) {
-			printf("Cannot get MDIO bus device!\n");
-		} else {
+		if (bus) {
 			int i;
 
 			for (i = 0; i < peridot; ++i)