rockchip: theobroma-systems: puma: Migrate to use IO-domain driver
Switch to use the IO-domain driver to configure IO-domain based on
device tree instead of a setup_iodomain() function.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
diff --git a/board/theobroma-systems/puma_rk3399/puma-rk3399.c b/board/theobroma-systems/puma_rk3399/puma-rk3399.c
index 8b998ef..eeb8a99 100644
--- a/board/theobroma-systems/puma_rk3399/puma-rk3399.c
+++ b/board/theobroma-systems/puma_rk3399/puma-rk3399.c
@@ -3,31 +3,10 @@
* (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
*/
-#include <dm.h>
-#include <syscon.h>
-#include <dm/pinctrl.h>
-#include <asm/arch-rockchip/clock.h>
-#include <asm/arch-rockchip/hardware.h>
-#include <asm/arch-rockchip/grf_rk3399.h>
#include "../common/common.h"
-static void setup_iodomain(void)
-{
- const u32 GRF_IO_VSEL_GPIO4CD_SHIFT = 3;
- struct rk3399_grf_regs *grf =
- syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
-
- /*
- * Set bit 3 in GRF_IO_VSEL so PCIE_RST# works (pin GPIO4_C6).
- * Linux assumes that PCIE_RST# works out of the box as it probes
- * PCIe before loading the iodomain driver.
- */
- rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_GPIO4CD_SHIFT);
-}
-
int rockchip_early_misc_init_r(void)
{
- setup_iodomain();
setup_boottargets();
return 0;
diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig
index 7e76ec5..c2759e1 100644
--- a/configs/puma-rk3399_defconfig
+++ b/configs/puma-rk3399_defconfig
@@ -66,6 +66,7 @@
CONFIG_SPL_GPIO_HOG=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_ROCKCHIP_IODOMAIN=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_MMC_SDHCI=y