arm: am33xx: Fix MPU opp selection
Update MPU frequencies and voltages as per the latest
DM[1] dated: OCT 2011 Revised APRIL 2016, Section 5.4.
Below is the consolidated data:
MPU values for PG 2.0 and later(Package ZCZ and ZCE):
-------------------------------------------------------
| | ZCZ | ZCE |
|-------------------------------------------------------|
| | VDD[V] | ARM [MHz] | VDD[V] | ARM [MHz] |
|-------|----------|------------|----------|------------|
| NITRO | 1.325 | 1000 | NA | NA |
|-------|----------|------------|----------|------------|
| TURBO | 1.26 | 800 | NA | NA |
|-------|----------|------------|----------|------------|
|OPP120 | 1.20 | 720 | NA | NA |
|-------|----------|------------|----------|------------|
|OPP100 | 1.10 | 600 | 1.10 | 600 |
|-------|----------|------------|----------|------------|
| OPP50 | 0.95 | 300 | 0.95 | 300 |
-------------------------------------------------------
There is no eFuse blown on PG1.0 Silicons due to which there is
no way to detect the maximum frequencies supported. So default
to OPP100 for which both frequency and voltages are common on both
the packages.
[1] http://www.ti.com/lit/ds/symlink/am3356.pdf
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
diff --git a/include/power/tps65910.h b/include/power/tps65910.h
index ca84301..976130d 100644
--- a/include/power/tps65910.h
+++ b/include/power/tps65910.h
@@ -62,6 +62,7 @@
#define TPS65910_OP_REG_SEL_MASK (0x7F)
#define TPS65910_OP_REG_SEL_0_9_5 (0x1F) /* 0.9500 V */
+#define TPS65910_OP_REG_SEL_1_1_0 (0x2B) /* 1.1000 V */
#define TPS65910_OP_REG_SEL_1_1_3 (0x2E) /* 1.1375 V */
#define TPS65910_OP_REG_SEL_1_2_0 (0x33) /* 1.2000 V */
#define TPS65910_OP_REG_SEL_1_2_6 (0x38) /* 1.2625 V */