net: uec_phy: Implement TXID and RXID RGMII modes for Marvell PHYs
This will be needed for MPC8360E-MDS boards with rev. 2.1 CPUs.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
diff --git a/drivers/qe/uec.h b/drivers/qe/uec.h
index 1568310..df6f7c9 100644
--- a/drivers/qe/uec.h
+++ b/drivers/qe/uec.h
@@ -670,6 +670,7 @@
ENET_1000_RGMII,
ENET_1000_RGMII_ID,
ENET_1000_RGMII_RXID,
+ ENET_1000_RGMII_TXID,
ENET_1000_TBI,
ENET_1000_RTBI,
ENET_1000_SGMII
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index aa4eb5e..9715183 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -429,12 +429,23 @@
{
struct eth_device *edev = mii_info->dev;
uec_private_t *uec = edev->priv;
+ enum enet_interface iface = uec->uec_info->enet_interface;
- if (uec->uec_info->enet_interface == ENET_1000_RGMII_ID) {
+ if (iface == ENET_1000_RGMII_ID ||
+ iface == ENET_1000_RGMII_RXID ||
+ iface == ENET_1000_RGMII_TXID) {
int temp;
temp = phy_read(mii_info, MII_M1111_PHY_EXT_CR);
- temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY);
+ if (iface == ENET_1000_RGMII_ID) {
+ temp |= MII_M1111_RX_DELAY | MII_M1111_TX_DELAY;
+ } else if (iface == ENET_1000_RGMII_RXID) {
+ temp &= ~MII_M1111_TX_DELAY;
+ temp |= MII_M1111_RX_DELAY;
+ } else if (iface == ENET_1000_RGMII_TXID) {
+ temp &= ~MII_M1111_RX_DELAY;
+ temp |= MII_M1111_TX_DELAY;
+ }
phy_write(mii_info, MII_M1111_PHY_EXT_CR, temp);
temp = phy_read(mii_info, MII_M1111_PHY_EXT_SR);